My interface is very simple
G8XGG is the builder
here the web page http://www.xggcomms.com/page9.htm
and this is the one i have
http://cgi.ebay.com/Icom-PSK31-CAT-Interface-IC-703-706-78-718-and-more_W0QQitemZ370167897186QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item562fb9dc62&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1234|293%3A1|294%3A50
J. Hector Garcia XE2K / WT6J
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org
--- On Mon, 7/6/09, Joe Subich, W4TV <lists@subich.com> wrote:
From: Joe Subich, W4TV <lists@subich.com>
Subject: RE: [WriteLog] IC-7000 DTR /RTS PTT
To: "'Hector Garcia XE2K'" <j_hector_garcia@sbcglobal.net>,
writelog@contesting.com
Date: Monday, July 6, 2009, 5:39 PM
Without knowing the specifications on your particular interface
it is difficult to provide specific advice for your hardware.
However, unless you are doing CW and PTT on the radio port or
the radio requires handshake on RTS/CTS (e.g., Kenwood), WriteLog
sets RTS and DTR high on the radio ports.
See the "WRITELOG.INI [RIGS] section of the help file for the
information on overriding the default operation of RTS and DTR.
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Hector
> Garcia XE2K
> Sent: Monday, July 06, 2009 4:55 PM
> To: writelog@contesting.com
> Subject: [WriteLog] IC-7000 DTR /RTS PTT
>
>
> Hi Guys
>
> Having several Days trying to find the correct configuration
> to make work the IC-7000 with WL and stop the PTT to be
> stuck when start the WL
>
> I have an CI-V sound card interface that i bought on Ebay
> from a Seller of UK, the interface works WITH NO ISSUES with
> the Ham Radio Delux, just select the DTR and the radio
> works no problem, this interface is a Serial with DB-9
> connector and can be used with the USB to Serial adaptor and
> no problem.
>
> I try to change all the things I THINK was needed based on
> the HELP files for ICOM in WL and some info i get from the
> List, but changes make no difference the CI-V works fine at
> any baud speed but when connecting the 13 pins DIN the PTT
> get stuck , removing the radio from the PORT set up on WL
> the PTT stop. i'm just using the CI_V and will like to have
> all working
>
> Wha is my problem or what i'm missing to change on the
> WRITELOG.INI to make the radio stop the PTT when selected.
>
>
>
> J. Hector Garcia XE2K / WT6J
>
> Mexicali B.C DM22fp
>
> P.O.Box 73
>
> El Centro CA 92244-0073
>
> USA
>
> http://www.xe2k.net
>
> http://www.dxxe.org _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|