I using a 16bit Serial Port card, where I can use different IRQs for
each !! COMports. So this configuration running OK with so many
different software, and the crash also comes when I use only the mouse
and no other device..!!!
Configuration:
Com1 IRQ4
Com2 IRQ3
COM3 IRQ5
COM4 IRQ11
This is all ok, also with other software. Writelog do not crash,
when I use a PS2 Mouse on the serial port with a PS2-SERIELL adapter.
So, even a software must handle a simple standard mouse..!! this is
not exotik even standard 2 button mouse !!!
Roger Borowski schrieb:
>
> Looks to me as you need to change the interupt on either COM 3 or
> Com 1 so they don't try to use the same IRQ 4, which is the
> default configuration. You'll likely be able to easier change COM3
> to another unused IRQ via jumpers on its board and your problems
> should be solved. 73, Rog-K9RB
>
> ----- Original Message -----
> From: Wil DJ7AA <dj7aa-wil@t-online.de>
> To: W. Wright, W5XD <w5xd@writelog.com>; Ron Stailey, K5DJ
> <k5dj@writelog.com>; Writelog <writelog@contesting.com>
> Sent: Sunday, February 04, 2001 10:49 AM
> Subject: [WriteLog] Vers 10.23 crashed with serial Mouse
>
> >
> > Hello Ron,Hello Wayne
> >
> > i am really disapointing on another behavor with Writelog. I
> installed
> > the new 10.23 and wanted to try a bit in the XE-RTTY Contest.
> > The following problem was found. After starting Writelog the
> mouse
> > cursor
> > jump on the upper left corner of the screen.After this I had to
> reboot
> > the computer, the mouse is absolutly crashed. All windows from
> writelog
> > are open.
> > I using a serial standard mouse on Comport 1,using the standard
> Win98
> > mouse driver. All my programms on the computer running ok with
> this
> > mouse, never saw something like this. I tried several mouse
> here,
> > normal 2 button, 3button and wheelmose ( all seriell) and all
> the same.
> > On another computer with a standard Bus-mouse no trouble.
> > So this machinme is a P166MMX with 128 Mb Ram and 4 comports
> with
> > different interrupts. The com1 setup uses all standard settings.
> > Com3 with Radio and Com4 with PTC2 was ok earlyer.
> > When I change the mouse to a bus-mouse it looks ok. But I have
> to use
> > this PC with a serial mouse, so what is happen??
> > Dont find any anser in the helpfile for Writelog to setup
> something
> > in the ini file for a mouse.
> >
> > A quick help is needed, because we want to use next week this PC
> > for CQ-WPX.
> >
> > Wil DJ7AA
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> >
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|