Hi
Hi Gert,
I also have the latest version of that kit and I've had no trouble with it.
My settings are as follows:
Port Setup window:
Com1 checked under CW, Rig Type = No Rig, Baud Rate = AUTO, Poll is
checked, Com PTT YES
All mode PTT on CW port RTS is checked
CW keyer type = K1EL Winkey
CW PTT... sub-window:
under CW PTT Setup - On LPT pin 16/COMM RTS is checked.
Of course you'll have to add a PTT line to the WinKey kit. This jack is
not include with the kit. I used a mini-mono jack for this. If you
bought the enclosure it doesn't come with a hole for the PTT jack. I
mounted the mini-mono jack in the rear upper corner of the enclosure.
Good luck with the keyer,
73,
Art
W2NRA
> From: Gert, OE3ZK "Gerhard Kmet" <oe3zk@aon.at>
>
> I assembled and tested WinKey with its WinKey Test Bed OK on COM1.
>
> Now I am trying in vain to get it to work with WriteLog. What do I
> have to configure in WriteLog for WinKey?
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|