Dave to get to the control, go to the toolbar on the WL Logging window.
Click on Radio=>Antenna to 0 azimuth to get it going. Of course you
have to have a callsign in the call and the Beam Headings has to show
the Direction.
Some of us have 'redefined' a shortcut key to do this. Under 'Tools'
click 'Keyboard shortcuts'.
Click in the box that said Shortcut Keystroke. Then press "next key
pressed' button. The next key you press will be the new shortcut. I
and others use the 'Graves' key for the antenna rotor.
The 'Graves' Key (I hope I spelled it correctly) is the key just to the
left of the number '1' key on the far left on the 4th row. Press this key.
Next select the shotcut from the menu below, what you are looking for
is 'RadioAntennaToAzimuth'. Select it, and click OK.
Now the Graves key will move the rotor. Remember to click 'Setup' from
the toolbar and click 'Save configuration'. Else you have to do it again.
Hope this helps.
Joe K0BX
Dave Sublette wrote:
>Admittedly, I have not used this program much in the years that I have
>owned it. I have spent most of the day reading the help files, etc.
>After much looking, I cannot find where to control the antenna rotator.
>I find where to set up the Com Port, etc, but nowhere on the lofgging
>screen or on the tool bar, etc,,,do I see a place to actually control
>the antenna. I am running version 10.57H.
>
>Help, please!
>
>Dave, K4TO
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|