Rob,
Your symptoms sound as if WriteLog is not in the correct mode and
would not be related to using the microHAM interface/software.
Double check your radio set-up, the mode supported in the "contest"
log you have opened and mode control for the rig. The contents
and mode (Wave file, CW or RTTY) of the F-Keys are determined by
the current mode of the Entry Window. Make sure the Radio "button"
in the entry window is displaying the correct frequency and mode.
If not, click it and confirm that it is linked to the correct
port and not in 'manual.'
73,
... Joe, W4TV
On 8/25/2010 12:44 PM, Robert Pitman wrote:
>
>
>
> I have an FT1000D running into a Microkeyer 11. However since I had a
> a problem that required a new hard drive in my PC I can only send
> RTTY and CW messages in writelog by highlighting the packet window
> then pressing the appropriate F key.
>
> That is when I press an F key with the QSO entry window highlighted
> nothing happens. The other strange thing is that I can send RTTY from
> the decoding window (by right clicking and selecting either the F3 or
> F4 key). The PC here is running XP Pro and all was well until the
> rebuild. I set up everything according to the Microham setup guides
> for Writelog and DX4Win ( DX4Win is working fine). Can anyone help me
> on this one please. 73 Rob GW0RYT
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|