> On 11/9/2010 5:18 PM, Bill Gillenwater wrote:
> I have seen posts regarding PTT drops during sending of messages.
> Right in the middle of a message the PTT will drop but the message
> finishes in the RTTY send/receive dialogue box. Has someone figured how
> to eliminate the drops. Do I have the PTT set incorrectly? I am using
> COM PTT in the Config section of Writelog. I read a post that said there
> is a PTT setting in MTTY??
COM PTT is a very bad idea in general. However, if you are using the
MMTTY plug-in it generates its own PTT on the RTS and DTR lines of the
FSK port. If you are using the Plug-in add a second transistor driver
on either the RTS (preferred) or DTR line (see the excellent info by
AA5AU here: http://www.rttycontesting.com/tutorials/tutorials.htm
and here: http://www.aa5au.com/rtty.html)
73,
... Joe, W4TV
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|