Tony,
Where are you selecting COM 10? WriteLog passes the COM port to
MMTTY when it initializes the plug-in. Set the COM Port in the
RTTYrite menu then select MMTTY as the TU Type to open/initialize
the plug-in.
Note - you must use the plug-in and can't use a stand-alone copy
of MMTTY with Writelog. I strongly recommend a separate install
of MMTTY in a separate directory for Wiritelog so there is no
"mixing" of the MMTTY.ini file between WriteLog and stand-alone
settings.
73,
... Joe, W4TV
On 10/18/2011 5:33 PM, K2NV@arrl.net wrote:
> I have been trying to get Writelog running with MMTTY and FSK.
> In stand alone mode, MMTTY works fine. It also works fine with N1MM.
> I am using a real COM port (COM10) using 2N2222A keying for PTT and FSK.
> (Winkey for CW)
> I am confused about the PORT selection. When I select PORT 10 (and also in
> MMTTY) MMTTY switches back to SOUND and FSK does not work.
> I have spent untold hours trying to figure things out. And have read
> everything on Don's very useful web site (AA5AU).
>
> I am using WInXP Home, Creative Labs sound card.
>
> Anyone??
> Tony
> K2NV
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|