Read the help file on rig interfacing for CW. You will need an interface
(transistor or optoisolator) to key the PTT & the key line. Writelog can
key the PTT via a control port if the rig has one and supports this, or it
can use such an interface to key most any rig. Mine is built right into a
db25 connector. And the audio can come right off of the patch output. You
will probably want to use a 1:1 isolation transformer. A similar interface
works great on RTTY too.
At 03:19 PM 12/7/01 -0500, you wrote:
>The first contest log I have ever seen arrived in mail today---WriteLog.
>Great piece of work and am enjoying playing with it. Problem: My TenTec Omni
>D does not have a serial port and thus no computer interface. I can do
>without some of the stuff but would like the CW reader since guys now go
>about 80 WPM in some contests. Hi. Any ideas or suggestions on how I might
>get audio from radio to computer? The phone patch OUT plug? Headphone jack?
>Then, how would I get it into the computer. There is a sound card in the
>Windows 98 but don't know if it would work for CW. I would appreciate some
>help.
>73, Archie, K4GA
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
Jim Rhodes K0XU
jim@rhodesend.net
|