Im sitting here in my radioschack and looking at the software and I
> can't find my rigg listed in the software - don't your software
> support the IC-9100? If not - can I use some other rigg from ICOM
> in the software instead so I can get my combination to work?
This answer - like so many others - is in the Writelog help file. I
strongly suggest you *read the manual*!
See INI file options, [RIGS] paragraph. Define the rig as something
*close* to the 9100 - typically the IC-7600 - and the override the
default address with the 9100 address:
The following entries override WriteLog’s default setting for the
Icom rig address for the various Icom rigs. All rigs that have Icom
rig addresses have corresponding entries in WriteLog.ini here under
the name that matches the name in the Setup Ports dialog including
space characters!
Icom IC-781=0x33
> Icom IC-756PRO=0x12
Additional information is available from the K9JY web site:
www.k9jy.com
and AA5AU's RTTY Contesting site:
www.rttycontesting.com
73,
... Joe, W4TV
On 11/17/2012 8:18 AM, Mikael Karlsson wrote:
Hello good afternoon from Sweden
I bought your software (WriteLog Full V11.07) with registration
SM0LPO
(software registration key g8D7vmks64xp8) and I have some problem and
perhaps you could be able to help me with them?
I have bought a brand new ICOM IC-9100 transceiver and was planning
to
run the cqwwcw contest next weekend. I would like to use my keyboard on
my computer (windows 7) to run your software (transmit morse-code
through keyboard).
Im sitting here in my radioschack and looking at the software and I
can't find my rigg listed in the software - don't your software support
the IC-9100? If not - can I use some other rigg from ICOM in the
software instead so I can get my combination to work?
Im also would like to run my rigg and your software WriteLog V11.07
together with my interface SignaLink USB (I'm using windows 7 on my
"radio computer"). Is that possible? I know that the SignaLink is
working on CW under the mode usb-D on my rigg. But I can't find any
information in the software manual how I do to run my equipment together
with your software. Please can you help me?
I also have the RigExpert´s Tiny CI-V-3 here in my schack … would it
possible to use this equipment together with your software instead of my
SignaLink USB? Would that be easier?
A third possible way to work … Im also having the digital master 780
in combination with HamRadioDeluxe in my radioschack and through the
digital master 780 Im able to run cw on the mcw mode - can I combined
the digital master function in HRD instead with your software so I can
be able to run the contest in cw?
Sorry if my english isn't so good and I really hope that you could
understand my questions. I was planning to call you but my english is so
very poor and I can't really talk english with a person over the phone
consurning this kind of issues … so I hope it is okey for you that Im
using the mail instead.
Hope that you can answer my questions because Im looking forward to
run the contest together with your software - I have been QRT for about
20 years and have now became QRV again on the bands :)
Best regards and 73´s
Mikael Karlsson, SM0LPO
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|