uups, got the wrong key on the keyboard,
message got send unfinished...
sorry for the bandwith :)
second try:
> Hi,
>
>> - there is no Cabrillo option. How shall we send the log to organizers?
>
> Click on "Contest"/"Parameter Setup" to enter name, club, address,
> used power, class, soapbox comments,
> Then click on "Contest"/"Create DARC *.SFT FILE"
>
> The .STF format is developed by the DARC.
> STF stands for STÃtzerbach Format (because it was
> developed at a Meeting in STÃtzerbach)
>
> It is somewhat more flexible than Cabrillo,
> it is also ASCII, You may have a look at it with
> your favorite text editor.
>
>> - in the WAG rules it is written that if a DL
>> station does not send the DOK code, the control
>> shall be logged as 000. The module does not allow for
>> this, and puts instead a ?
I just verified this, it is the case, writelog writes the
STF file with a "?"
I suppose, this should be ok.
(as all "000" are written as "?", and so the QSOs do just
count towards QSOs but not Mults).
I wrote the WAG contest manager as CC on this message,
just to inform him - maybe the log robot should know this :)
>> - we have noticed a strange behavior for the "Show Multipliers" window,
>> i.e. sometimes the multiplier is shown on the adjacent higher band. We ended
>> up keeping a manual multiplier sheet. This is important for M/S stations,
>> since the MULT station is allowed to work only new multipliers.
nothing known here about this.
I suppose Carsten DL1EFD is reading this reflector, maybe he
knows more about that.
73s de Werner DL4NER
(in WAG as DL0KC M/S)
--
Dipl.-Ing. Univ. Werner Maier
http://www.maiers.de/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|