Thanks, Hank.
My keyer is the newest version of the USB version - only two weeks old.
I will email Wayne to verify that the newer versions work with the
new WKUSB. If so, I will just upgrade my WL.
There should have been a mention in the WL revision history of the
support of the WKUSB.
Jerry W4UK
At 06:51 PM 9/10/2008, hank k8dd wrote:
>----- Original Message -----
>From: "Jerry Flanders" <jeflanders@comcast.net>
>To: "Alan Maenchen" <ad6e@arrl.net>; <writelog@contesting.com>
>Sent: Wednesday, September 10, 2008 1:46 PM
>Subject: Re: [WriteLog] Winkey USB CW keyer and WL?
>
>
> > Thanks to all who helped, both privately and here.
> >
> > My Commslot commands work OK. Someone mentioned using a "winkey 2"
> > selection in setup - I only have a winkey type available. You guys
> > that have it working - is it Winkey, or Winkey 2?
>
>There are two versions Winkeyers.
>
>The older one, with the speed control on the top of the box is, in Writelog,
>called
>"K1EL Winkey" and it has a serial interface.
>
>The newer one, with the speed control on the front and four memory buttons
>(1 red
>and 3 black) is, in Writelog, called "K1ELWinkey 2". The box says 'WinKeyer
>USB'
>and it has a USB interface.
>
>If I remember correctly, the option for "K1EL Winkey 2" started to appear in
>version 10.68F. Before 10.68F there was only "K1EL Winkey" -- and that
>worked
>with both versions of the WinKeyer, but did not support all the functions
>of the
>WinKeyer USB (most notably port switching for SO2R).
>
>73 Hank K8DD
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|