And another one I find handy (from
http://k9jy.com/writelog/writelogini/band-map/)
AutoFillFromBandmapHz=n
If you tune closer than AutoFillFromBandmapHz to a bandmap station, the
Entry window will be auto-filled from his frequency. Set this to zero and
WriteLog will not auto fill. AutoClearOnTuneMinHz set to zero will disable
AutoFillFromBandmap as well.
Once you're bandmap is filled, as you tune across a station, their callsign
appears in the call field in your log. Slick for that 2nd pass through the
band.
73 de Al, KE1FO
-----
Visit my amateur radio contesting blog at ke1fo.wordpress.com.
On Sun, Nov 23, 2008 at 6:52 PM, hank k8dd <hank.kohl@gmail.com> wrote:
> Good idea Gary!
> I have:
> [ENTRY]
> MapCallOnSpace=1 # Put call on bandmap on space bar
> AutoClearOnTuneMinHz=100 # Clear line when move VFO 100 Hz
> TuningDetectionCount=3 # Make sure you really are tuning
>
> You type a call, hit the space bar, it goes in the bandmap and shows as a
> dupe
> and you tune away and the entry clears, like a ALT-W
> If it wasn't a dupe you hit F4, it goes in the bandmap, work him and tune
> away.
> Or you don't work him, tune away, entry clears and it's still in the
> bandmap
> as
> unworked and you can come back to it later.
>
> The # rem statements don't seem to hurt the operation and it sure makes it
> easy
> to remind you why you put the line in there!
>
>
>
> ----- Original Message -----
> From: "Gary AL9A" <al9a@mtaonline.net>
> To: "William Maurer" <wb6jjj@sbcglobal.net>; <writelog@contesting.com>
> Cc: "'Jerry Bliss'" <jerry.bliss@gmail.com>
> Sent: Sunday, November 23, 2008 1:37 PM
> Subject: Re: [WriteLog] AutoClearOnTuneMinHz=n
>
>
> > Bill,
> >
> > In addition to "AutoClearOnTuneMinHz=500" try adding
> > "TuningDetectionCout=3"
> > to your [Entry] section. According to the WL help manual,
> > "TuningDetectionCount is the number of consecutive polls of the rig that
> > must be tuning to decide the operator really is tuning." If this command
> > is
> > missing WL cannot determine that VFO movement has occurred and the entry
> > in
> > the Call field should be cleared.
> >
> > 73,
> > Gary AL9A
> >
> >
> > ----- Original Message -----
> > From: "William Maurer" <wb6jjj@sbcglobal.net>
> > To: <writelog@contesting.com>
> > Cc: "'Jerry Bliss'" <jerry.bliss@gmail.com>
> > Sent: November 22, 2008 6:37 PM
> > Subject: Re: [WriteLog] AutoClearOnTuneMinHz=n
> >
> >
> >>I tried this phrase "AutoClearOnTuneMinHz=500" but I could not get it to
> >> work - I tried a couple of different locations in the .ini file. I
> >> called
> >> Jerry, K6III, this afternoon since he is a close neighbor to make sure
> >> that
> >> I placed it in the correct location. He said that his is in the [ENTRY]
> >> section. I tried that section with no success. Is there some other
> >> command
> >> that needs to precede this command? Any help would be appreciated.
> >>
> >> Bill, WB6JJJ
> >>
> >> -----Original Message-----
> >> From: writelog-bounces@contesting.com
> >> [mailto:writelog-bounces@contesting.com] On Behalf Of Jerry Bliss
> >> Sent: Monday, October 27, 2008 8:31 PM
> >> To: writelog@contesting.com
> >> Subject: [WriteLog] AutoClearOnTuneMinHz=n
> >>
> >> Some (Gary?) recently mentioned on WL Reflector the use of
> >> AutoClearOnTuneMinHz=n in the INI file (see below).
> >> THANKS for that hint... works slick on my old version 10.62h. This will
> >> save
> >> a lot of Alt-W keying. I wish I had read
> >> this reflector posting before CQWW this past weekend!
> >> 73 de Jerry, k6iii
> >>
> >> ===================================================================
> >>> I also use > another command in my writelog.ini file in the [Entry]
> >> block,
> >>> AutoClearOnTuneMinHz=n, that clears the call in the CALL field when the
> >>> VFO is tuned n Hz away from the current freq. Didn't realize until
> this
> >>> contest that this command will clear the CALL field for me after
> mapping
> >> the call
> >>> to the band map by just turning the VFO knob. Saves the trouble of
> >> hitting
> >>> the Alt-W combo all the time. Live and learn!
> >>>
> >> _______________________________________________
> >> WriteLog mailing list
> >> WriteLog@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/writelog
> >> WriteLog on the web: http://www.writelog.com/
> >>
> >> _______________________________________________
> >> WriteLog mailing list
> >> WriteLog@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/writelog
> >> WriteLog on the web: http://www.writelog.com/
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|