I finally got things working. The resolution of the problem was simpler
than expected.
All I did was un-select the PTT option from the rig under the "ports" menu,
and everything started to work as advertised.
I can't explain how or why - it just works...
Thanks to those who messaged me - you pointed me in the right direction.
Tom, AB3IC
-----Original Message-----
From: Joe Subich, W4TV
Sent: Friday, January 13, 2012 7:00 PM
To: Tom Shelton ; [WriteLog]
Subject: Re: [WriteLog] W/L & MMTTY
Connect the hardware PTT (VOX) from SignaLink to the PKS pin (pin 9)
of the ACC2 connector and disable COMM PTT (software command PTT) in
RTTY.
The TS-2000 (and other recent Kenwood transceivers) requires PTT on
the PKS pin to enable audio from the ACC2 jack (and mute the mic)
for AFSK operation. The software PTT commands emulate PTT on the
mic jack and enable the microphone.
It's also possible that Windows 7 has the audio output level turned
down for WL/MMTTY but the first thing to check is proper PTT to
select the ACC2 input.
73,
... Joe, W4TV
On 1/13/2012 6:09 PM, Tom Shelton wrote:
> I have MMTTY working fine by itself, but when I try to run it from inside
> Writelog, the following happens.
>
> I receive the signal, I can save the calls, when I try to transmit, my rig
> keys, but no modulation.
>
> Kenwood TS-2000
> SignaLink – W/L is selecting the correct soundcard
> W/L Version 11.01
> Windows 7
>
> what am I missing?
>
>
> Tom Shelton
>
> No electrons were harmed in the sending of this message, although several
> were terribly inconvenienced.
> Draco Dormiens Nunquam Titillandus
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|