Jim
Initially i was't even sure what the heck a YRC-1 was. Anyway it is
supposed to emulate a DCU-1. I am assuming that you have set it up corectly
within writelog. To do that you will need to go to setup menu. Choose
Ports. Then select the Rotator Control Tab. Two options - if you are using
just one then it's the first option - enter com5 here and the rotator type
is DCU-1.
If you are already seeing the rotor and its port in windows I can see no
reason why it shouldn't come up assuming you've followed these steps.
If these stps do not work you would have to find some way of isolating
whether it is a writelog problem or a problem with the hardware/software of
the YRC-1 - which might be running a different computer and/or running
another YRC-1 or similar controller.
Troubleshooting these probs can be difficult because every bit of
information and its precision is critical to even understanding where the
likely cause of the problem is.
I know that writelog has supported rotators for many many years and the
DCU-1 protocol is a wel-established protocol. I have used rotator control
with the Yaesu protocol and it has worked with no problem. Most recently I
have been headed towards using a station-master for rotator control but
it's still on my to-do list.
Bottomline - WL is basically a mature programme and it supports the
protocol you're using. If that protocol or rotator control on a whole was
broken, I'm pretty sure it would have been flagged because many people seem
to use the feature. I'm therefore more inclined to look to the YRC-1 as
being potentially the problem.
Hope that helps.
Dean 8P6SH
*Dean St.Hill*
*Barbados.JustAskLocals.com <http://Barbados.JustAskLocals.com>*
*It's A Big World. Travel Smarter <http://barbados.justasklocals.com/>*
*17 Ocean City*
*St.Philip*
*Barbados*
*246-825-2039 <246-825-2039>*
*246-416-5277 <246-416-5277>*
*dmsthill@gmail.com <dmsthill@gmail.com>*
On Fri, Nov 18, 2016 at 3:17 PM, Mark Klocksin <mpklocksin@ameritech.net>
wrote:
> Jim, I understand the frustration you’re feeling, especially since the
> unit had failed earlier when transformer shorted out earlier. I’ve been in
> the same position, where something that works with one program doesn’t work
> with another. I hope this turns out to be an easy fix for you.
>
> It’s possible something is wrong with your unit. However, from what
> you’ve told us, I think it’s unfair to blame MFJ at this point. It isn’t
> MFJ’s responsibility to make sure their gear works with every logging
> program. It’s their responsibility to be sure it works with one or more
> generally-accepted standards, and to publish the standard(s) it’s
> compatible with. It’s actually the buyer’s responsibility to do the
> research to see that all the software he’s using follows compatible
> formats. And assuming MFJ's correct that the controller works properly
> with HRD, then the issue in this case points to either lack of support (or
> a bug) in WriteLog, or setup/operator error. Or possibly a Windows or USB
> adapter issue. I think you’ll need to do some troubleshooting. You may
> want to try testing this with some other program, such as DXLabs or N1MM+.
> Or perhaps someone else will come forward with a fix.
>
>
> 73 and good luck,
>
> Mark WA9IVH
>
>
>
>
>
>
> > On Nov 18, 2016, at 10:34 AM, <jimlaporta@jlaporta.com> <
> jimlaporta@jlaporta.com> wrote:
> >
> > I recently bought a YRC-1 and it worked fine stand-alone for 29 days,
> then
> > the transformer shorted out and finally MFJ replaced transformer and
> > returned unit.
> >
> >
> >
> > I tried to set the YRC-1 up with WriteLog Version 12.09F, September 2016
> > running on Windows 7 Professional with all current updates, NEVER 10 rule
> > here. I used a standard A-B USB cable and the hardware address for the
> > configured port was COM5. The PC sees the YRC-1 but I don't get any
> > connectivity via WriteLog. Tried all that I have been able to find to
> make
> > WriteLog interact with the YRC-1.
> >
> >
> >
> > I challenged MFJ-HyGain and here is their response:
> >
> >
> >
> > "Sorry, I could not install writelog on my computer. I did use it with
> Ham
> > Radio Deluxe. Tom Stone AA5MT,
> > 308 Industrial Park Rd, Starkville, MS 39759, For faster service call
> > 662-323-9538 ext 232"
> >
> >
> >
> > I cannot believe that the MFJ folks don't have WriteLog to test their
> "fine
> > equipment" no one in their right mind uses HRD for contesting, I sure
> won't.
> > Does anyone know how to make the YRC-1 work with WriteLog and actually
> have
> > it working? I would like to know!
> >
> >
> >
> > Jim, N1CC
> >
> > Contesting and DX
> >
> > http://www.jlaporta.com/N1CC
> >
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|