Don,
In RTTYrite, PORT is set to NONE
Hardware generated FSK is checked (and grayed out)
As such, I'm pretty sure WL is generating the FSK and sending it to the
virtual COM port.
other things:
TU type = XMMT.ocx
In XMMT setup:
Port = EXTFSK64
Radio command, Port = none
Misc:
TX Port = COM-TxD(FSK)
USB Port = C limiting speed
In Writelog Setup (Ports):
Rig1 = Elecraft K3, COM5 Rate=default, CommPTT = yes
all other rigs blank
CW = COM15 (Winkey USB)
My FSK and PTT settings are on COM6 which is the second virtual COM port in
the K4.
The K4 is in FSK mode, not DATA or USB.
BUT (!) I don't seem to have COM6 listed anywhere in MMTTY or WL so I
can't explain how it works. I'm a hardware guy so I have no idea how this
software stuff works.
73, Alan AD6E / KH6TU
On Thu, Feb 6, 2025 at 7:38 AM Don AA5AU <aa5au@bellsouth.net> wrote:
> I'm interested in knowing how you guys are using EXTFSK or EXTFSK64 with
> WriteLog.
>
> What selection are you using under the Rttyrite Port menu?
>
> I have always been under the impression that WriteLog does the FSK, not
> MMTTY or any other plug-in. But something could have changed. If so, I
> would like to document it.
>
> Thanks!
> Don AA5AU
>
> On Wednesday, February 5, 2025 at 08:51:44 PM CST, Alan Maenchen <
> ad6e@arrl.net> wrote:
>
>
> Cort,
>
> My setup is Win11, WL12.86B, MMTTY
> Using XMMT.ocx
> EXTFSK64 not sure why anyone would be using EXTFSK these days. There is
> a difference and I remember some hassles with EXTFSK but I don't remember
> exactly what that problem was.
>
> Rig: plain vanilla K4 with second virtual serial port having DTR = FSK and
> RTS = PTT
>
> It works.
>
> GL & 73, Alan AD6E / KH6TU
>
> -------------------------
> Date: Wed, 5 Feb 2025 18:30:41 -0600
> From: Courtney Judd <k4wi@k4wi.net>
> To: Writelog <writelog@contesting.com>
> Cc: CQ-Contest Reflector <cq-contest@contesting.com>
> Subject: [WriteLog] HELP AGAIN
> Message-ID: <21c25f96-cbea-b9a5-cb38-7ddef54e730a@k4wi.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I am trying to get set up for CQWW WPX RTTY and can't seem to get this
> sorted out. Using FTdx101MP, Writelog V12 and MMTTY. I have everything
> set up as usual but when hitting any of the F keys... the radio goes
> into TX, shows power out, using EXTFSK 1.06, appears to be TX in MMTTY
> with the message scrolling out but only hear a single tone in the
> radio's monitor so I doubt that I am actually transmitting rtty tones.
> The BK-IN radio button makes no difference. Any ideas of where to look?
> Thanks, Cort K4WI
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|