There is a patch to fix the LPT CW control on www.writelog.com. It will fix
your problem.
-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On Behalf Of George Johnson
Sent: Saturday, January 19, 2002 9:19 AM
To: Writelog
Subject: [WriteLog] LPT Changes in 10.29 and 10.30
Hi All,
Can anyone give me a summary technical description of what happened to
the LPT control lines with 10.29 and 10.30? I am presently operating
"OK" with 10.28. I need to know what logic changed and whether to
reconfigure my controls lines or not.
My present configuration:
CW is controlled by an NPN transistor with its emitter tied to pin 1 of
LPT. The base resistor is tied to pin 17 of LPT. This works fine and
was my old CT configuration.
PTT is controlled by an NPN transistor with its emitter tied to "ground"
via pin 18 of LPT. The base resistor is tied to pin 16 of LPT. This
works OK except for the lock up at machine boot that is cleared by
starting WL.
I need to know logically what was "done" or "undone" with the lines for
10.29 and 10.30.
TIA, George .. W1ZT
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|