Dale, I now have no problems when txing on the main vfo but I do have the
problems I listed when using the Sub VFO for transmitting, which weren't
there with previous versions of Writelog. I use Logger32 and QD keyer with
my mH Keyer and there are no problems when on sub vfo. Chris G3SJJ
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of D. Drake
Sent: 25 February 2005 00:54
To: writelog@contesting.com; g3sjj@btinternet.com
Subject: Re: [WriteLog] WriteLog/WinKey
Chris,
This sounds a lot like the kinds of problems I've been having as well.
We exchanged emails on this subject earlier in the month. I have been in
contact with K1EL concerning the problem. He is interested in working with
the Writelog programmer to get to the bottom of this. Apparently Writelog
didn't contact him before implementing WinKey support, which K1EL didn't
mind. He indicated that he thinks that with some cooperative exchange of
information between them the problem can be worked out OK.
Do you use WinKey with any other logging programs and if so are you
seeing any problems interfacing with them? I did read a response to my
last post from W5XD indicating that he believes the problem to be external
to Writelog.
I've been a faithful user of Writelog for quite some time. I was
feeling pretty frustrated when I sent my last post after struggling with it
through ARRL DX CW last weekend so I think my post read a bit like a flamer
(sri). I hope it gets squared away or I can get some confirmation that the
problem is in fact external to Writelog and I'll know what to work on at my
end.
Dale AA1QD
>Chris wrote -
> From: "G3SJJ" <g3sjj@btinternet.com>
> Subject: [WriteLog] Writelog/WinKey
> To: "Writelog Reflector" <writelog@contesting.com>,
> "microHAM@yahoogroups. com" <microHAM@yahoogroups.com>
> Message-ID: <MCBBILFIBOJAEJJDMDLEAEMDDJAA.g3sjj@btinternet.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I am experiencing a couple of annoying problems with Writelog which only
> appears to have surfaced since v10.52F.
>
> Firstly, it seems that WL and Winkey have to learn to work together each
> time. For the first 10 Qs or so, the speed keeps changing. It is set for
> 28wpm then goes down to 26 or up to 31. Eventually they work together.
> Using
> Page Up/Down keys are also better for changing speed than the speed
> control
> knob on the MH keyer.
>
> Secondly, searching on the sub rx whilst maintaining Run Freq, I hit
> theGreen Tx button on the MP Sub-VFO and then hit F4 to send my callsign.
> The message starts part way through, sending something like MSJJ, also if
> I
> send on Winkey (in the MicroHam Keyer), sometimes the first character is
> missed.
>
> Has anyone else noticed these problems? (I use SO2V regularly and look
> forward to the time when WL supports polling the 2nd VFO)
>
> Chris G3SJJ
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 22-02-05
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 22-02-05
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 22-02-05
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|