I have seen this as well. This happened to me when:
-- I used my laptop at a different station...
-- configured WL Setup/Ports for the radios and W5XD+ multi-keyer at that
station...
-- returned home, where the laptop doesn't connect to a radio (normally)...
-- tried to open WL.
My guess is that WL is looking for a COM port configuration and W5XD+
multi-keyer that are not connected, and then crashing.
My fix was to remove WL and re-install it. It might be possible to go into
the INI file and remove entries specifying radios and
the W5XD multi+ keyer, but I have not explored that route.
-- Eric K3NA
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Roger Huntley
Sent: 2003 September 16 Tuesday 01:43
To: writelog@contesting.com
Subject: [WriteLog] Writel32
I suddenly am having a problem getting Writelog to operate. I continually
get an error message that shuts down the program. Message header is
Writel32 and the message is similar to "This program has performed an
illegal operation and will be shut down...."
I checked the archives but did not see any direction to clean up the
problem. Any help would be appreciated.
Thanks,
Roger, W7VV
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|