Your PK232 should run just fine with the port set to 9600,N,8,1.
You did not indicate that anything at all had appeared on the screen. One
thing that often fooled PK232 owners was that, when first powered up,
sometimes nothing appears on the screen until an asterisk (shift-8)is
entered. The 232 should respond with an AEA header and "cmd:" and should be
in its default (packet) mode. Then one enters "baud" or "baudot" and enters
RTTY mode.
Garry, NI6T
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of David Fisher
Sent: Saturday, September 06, 2003 12:40 PM
To: writelog@contesting.com
Subject: [WriteLog] Can't Intialize PK-232MBX
I cannot get WriteLog to initialize my PK-232 when setting it up for
RTTY.(Using Win XP) I set it up in the ini file at 1200,n,8,1 on com
1.
I also tried 2400 baud as that works with WF1B's software on my WIN
95
machine.
HyperTerminal gives me an "ok" at both baud speeds. Auto detect shows
"115200 8-N-1"
My mode & port selections are as per your write-up.
the ini.file is saved as a text file after I edit it. I did notice
that
the "speed" section remains as edited after I save it. (i.e.. I exit
the
file and then re-open it and the changes are there). But if I go to
the
contest menu and than return to the ini.file the speed "section" is
blank--it looks like it was never edited.
Can you give me any suggestions re how to resolve my problem?
73, Dave KA2CYN
ka2cyn@arrl.net
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|