If you have multiple connections you need to make each of them unique
with an SSID. Try NS3T-1 for your main cluster connection and NS3T-2,
NS3T-3, etc. for each skimmer. The cluster connections will bounce you
off if it looks like you are connected more than once per SSID. Yes, all
the nodes talk to each other regarding logged in call signs.
73 de Mike, W1NR
On 12/1/2020 9:44 AM, john@kk9a.com wrote:
> Jamie, nice to work you in Sweepstakes phone, your recorded voice system
> works very well.
>
> A do not operate assisted often but a long time ago I tried this
> category during a CQWW contest from Aruba. The internet connection was
> sketchy and I wound up spending more time re-connecting than it was
> worth. Then I learned about VE7CC's software which reconnects and never
> had an issue when using it.
>
> GL,
>
> John KK9A - W4AAA, P40A, etc.
>
>
> Jamie Dupree NS3T wrote:
>
> I don't use spots very often, so maybe there is a simple answer to this
> question.
> I don't send out spots. I just receive them.
> During CQWW CW, I kept getting disconnected from various Telnet Skimmer
> connections. It would happen sometimes after a few minutes, sometimes
> after an hour or a couple of hours. My conservative estimate is it
> happened at least 30 times.
> This wasn't an internet issue on my end as far as I could tell. When
> the spots stopped, I was using the same internet on the shack computer
> to look up various Telnet connection information.
> Is there some kind of instruction that I need to give, or box that I
> need to check to keep that from happening inside WL?
> Thanks.
> 73 Jamie NS3T
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|