Hi Rudy,
Your problem is your settings. I hope I get this right,
I'm at work. Try this:
Under rig control "comm PTT" = NO
CW on same port as radio
Checked "All mode PTT on CW port RTS"
"PC generates" under CW keyer type
Finally choose between PTT & QSK in the "CW PTT ..." button
Choose 1st selection "none (e.g. QSK)
Choose 3rd selection "On LPT pin16/COMM RTS" for PTT
73,
Art
W2NRA
----- Original Message -----
From: Rudy Severns <rudys@ordata.com>
Date: Thursday, December 2, 2004 12:06 pm
Subject: [WriteLog] re interface problem
> Help!
>
> I have what appears to be an interface problem with WriteLog 10.42.
>
> I have been using WriteLog for logging and keying the transmitter with
> memory messages. I have not used it for rig control. I simply ran
> the DTR line from the serial port into the base of a transistor and
> used that to key the rig. My operating system was Windows NT and this
> all worked fine.
>
> Recently I changed the operating system to Windows 2K and reloaded
> WriteLog. Now there is no way I can get the computer to key the
> transmitter with the memory messages. Very frustrating considering
> that I want to use it for the ARRL 160 contest tomorrow night! I have
> not made any hardware changes.
>
> I have noticed one thing. In the port setup window, if I check either
> CW or rig on the line associated with COM2 and press enter, the
> transmitter is keyed continuously. I have to go back into the port
> setup window and uncheck the setting before I can stop it.
>
> Any suggestions? Panic is rising here!
>
> 73, Rudy Severns N6LF rudys@ordata.com
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|