WriteLog
[Top] [All Lists]

Re: [WriteLog] beta WriteLog/Flex-6000 series driver

To: Richard Thorne <rthorne@rthorne.net>, 'WriteLog Reflector' <writelog@contesting.com>
Subject: Re: [WriteLog] beta WriteLog/Flex-6000 series driver
From: Steve AI9T <steve@ai9t.com>
Reply-to: steve@ai9t.com
Date: Tue, 28 Nov 2017 07:41:02 -0500
List-post: <mailto:writelog@contesting.com>
Rich

Make sure you have DAX Audio TX selected in the MMTTY sound settings. In the WL Ports settings make sure you have Com PTT set to yes. Also in WL you will want to stop both DAX and CAT. Writelog doesn't need it.

I'm like you I want something to work well for the RTTY Roundup.

73

Steve AI9T


On 11/28/2017 7:30 AM, Richard Thorne wrote:
Steve,

I can't get the 6700 to diddle in Writelog, N1MM or MMTTY stand alone.  Something has changed in my system.

I can get winwarbler to work in DXLab.

I'm glad you brought up the question, I want to be ready for ARRL Roundup in January.

Rich - N5ZC

On 11/27/2017 9:11 PM, Steve AI9T wrote:
Rich

The 6700 only does AFSK.

Steve AI9T


On 11/27/2017 10:04 PM, Richard Thorne wrote:
Steve,

I've been playing with my setup for quite a bit this evening. I can receive fine I just can't transmit.

The rig is keying and the MTTY  control panel show's a diddle, it's just not making it to the transmitter.

I'll keep playing with it, once I get it figured out I'll let you know.

I'm curious, why are you running AFSK vs FSK?

Rich - N5ZC

On 11/27/2017 9:12 AM, Steve AI9T wrote:
Hi Rich

I have a couple questions for you regarding the Flex setup. I started using N1MM a while ago but thought I'd give Writelog another try.

I was running V12 when I quit paying for updates but last week I decided I would renew and Pay up.

I have it setup for SO2R RTTY. Using a 6700. I have it working OK but have a couple issues. Running AFSK how do you increase the audio output? I'm not driving it quite hard enough and without DAX I can't figure out how to raise it.

Secondly, if I try to do TX lockout Last one wins it quits TXing and I have to uncheck the lockout setting to get it to TX again.

Thanks


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/




--
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>