WL/MMTTY does support what you are trying to do with one PC. I do that
all of the time.
I really do not have a solution to your issue, but you might want to
check these things.
When using two radios on one PC you need to have MMTTY and 2tone
installed in multiple folders
ex: /mmtty1/ = K4
ex: /mmtty2/ = K3
A separate copy needs to be run for each radio.
Windows updates can really screw up your audio devices so......
Check your Windows sound settings and make sure enhanced audio is
disable. For both sound cards that are created when you plug in the USB.
I just drove myself crazy helping a friend with an IC7300 which would
not receive and that was the issue.
Also make that the audio is 2 ch 48000hz and not only 1 ch 48000hz.
1ch will cause MMTTY to ignore the sub-receiver
MMTTY.ini file contains some info on your sound device
SoundDevice=5
SoundOutDevice=4
You might want to check that also
I truly do not believe any of these would effect your sound device not
showing up in MMTTY if it is in device manager
but it is worth a try
A windows update seems that most likely cause of the problem
Rich
On 2/26/2023 17:15 PM, Jeff Stai wrote:
Yesterday for NAQP I wanted to run SO2R with my old K3 and my new K4.
I got the K4 running fine in Writelog on MMTTY/2tone with the K4 internal
sound card, both receivers in SO2V mode.
Then I plugged in the external sound card for the K3. No amount of cajoling
could get that sound card to show up in MMTTY. It did show up in Device
Manager and in the list on 2tone. But I still couldn't get any sound to
register in 2tone.
I usually run PC per radio but yesterday I wanted to do all this on one PC,
because that's what I had. This was basically 4 radios - two SO2V K-radios.
I did get FSK transmit working on the K3 but I couldn't receive.
Before I go ripping into the audio path for the K3 and the PC - they had
been working fine very recently - Writelog does support this configuration
- right?
73 jeff wk6i
ps I did restarts and wire checks of everything to no avail. The fact that
the sound card did not show up in MMTTY is kind of a red flag that it was
software. Oh and yes each Rttywrite window has its own copy of MMTTY or
2tone.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|