Why not just use the audio output from the Packet DIN jack?
It is designed for this. Plugs were provided when you bought the radio (if
new).
73/Peter SM2CEW
www.sm2cew.com
At 14:57 2006-02-03 , Mike Ruttenberg G7TWC wrote:
>Yes there are 2 ports on the rear, EXT Speaker and AF Out.
>
>Ext Speaker is connected to the AF Gain control, and is supposed to be, so
no problem there.
>The AF Out is not meant to be connected to the AF Gain control. On mine it
is. In which case it is acting exactly with the EXT Speaker control,
>which is no good to me.
>
>Due to this issue, the problem is that I have to have the headphones on at
75% volume in order to get enough of a signal to drive the AF Out
>line feeding my soundcard for data mode work. The AF Out level is supposed
to be constant and independent of the heaphone/AF Gain
>volume. It isn't, as indeicated above and several times below, so when
trying to do data mode the rig speaker is blaring, or the headphones are
>blaring (whicher i choose to use). It is unpleasant to be in the presence
of the rig when the volume is at 75%.
>
>If you say "well don't turn it to 75% then" then I don't get enough volume
to drive the soundcard for data modes, which is what I would like to
>do.
>
>So back to the original issue: Has anyone come across a situation whereby
the AF Out levels are driven by the AF Gain control and thereby
>able to assist me in finding out whether a mod exists to make it like
this, in which case I can reverse engineer the mod so that it doesn't happen
>and does what it is supposed to do according to the instructions.
>
>Thanks
>Mike
>G7TWC
>
>
>
>
>
>
>On Fri Feb 3 13:15 , dave sent:
>
>>
>>
>>
>>
>>
>>
>>
>>I think there are 2Â small audio ports on the rear... one has both
>>RX'ers in it on a single line and is affected by the front af gain
>>control... and there is second port that has 2 lines in it and that is
>>the one that is set and cannot be adjusted from the front panel???? :-)
>>
>>
>>
>>Michael Ruttenberg G7TWC wrote:
>>
>>
>> I am indeed talking about the jack on the back.
>>
>>However, the issue is that the jack on the back IS being affected by gain
>>control even though it shouldn't be.
>>
>>That is why I am asking whether anyone knows how to stop this happening.
>>
>>Thanks
>>Mike
>>G7TWC
>>
>>----- Original Message -----
>>From: "Tom McDermott" <tom.mcdermott4@verizon.net>
>>To: <yaesu@contesting.com>
>>Sent: Friday, February 03, 2006 2:19 AM
>>Subject: Re: [Yaesu] FT1000MP AF out affected by AF Gain control settings
>>
>>
>>
>>
>>
>> The FT1000MP manual page 20 section 14 (AF OUT mini Phone jack) says
>>
>>
>>
>> "The
>>
>>
>> front
>>
>>
>> panel AF GAIN control amd the AF REV switch setting do not [in italics
>>
>>
>>
>> in
>>
>>
>>
>> original text] control the signals at this jack."
>>
>>
>>
>>I think the mini-AF jack that the manual is refering to is the one on the
>>rear panel of the radio - not the mini headphone jack on the frint panel.
>>The one on the rear panel (on my 1000MP) is unaffected by the AF gain
>>control.
>>
>>-- Tom, N5EG
>>
>>
>>_______________________________________________
>>Yaesu mailing list
>>Yaesu@contesting.com
>>http://lists.contesting.com/mailman/listinfo/yaesu
>>
>>
>>
>>
>>
>>_______________________________________________
>>Yaesu mailing list
>>Yaesu@contesting.com
>>http://lists.contesting.com/mailman/listinfo/yaesu
>>
>>
>>
>>
>>
>>
>
>
>_______________________________________________
>Yaesu mailing list
>Yaesu@contesting.com
>http://lists.contesting.com/mailman/listinfo/yaesu
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|