--------------23761C61287DC0AC2DB37874
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
David,etal:
If you look in your owners manual pg. 42 the replacement filter for the
XF-C crystal filter is XF-455K2620-01, a diode must be cut away( no big
deal) at the new filter location. I would call a Yaesu Dealer such as
Burghardt Amateur Supply or another 1-800-Yaesu Dealer for the best price
and install recommendations. I purchased all the filters for my FT1000 from
Yaesu because I was concerned with quality control and did not shop any
after market vendors.
Bubs
David Jordan wrote:
> Hi Folks,
>
> I understand that owners of the FT-1000, 1000D, and perhaps the 1000MP
> can make a siginificant improvement in selectivity of the radio by
> replacing the first IF crystal filter, the 12khz 70mhz IF filter. The
> fitler is intentional wide to allow FM transmissions. However, if you
> have no intentions of using the radio in wide-band mode you can install
> a 6khz or 3khz filter in place of the original equipment filter.
>
> SO, where can I find such a filter for my FT-1000D? International??
>
> thanks,
> dave
> WA3GIN
>
> --
> FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
THOSE THAT CAN, DX! THOSE THAT CAN'T, DX ON NETS !
--------------23761C61287DC0AC2DB37874
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
David,etal:
<br>If you look in your owners manual pg. 42 the replacement filter for
the XF-C crystal filter is XF-455K2620-01, a diode <u>must be cut</u> away(
no big deal) at the new filter location. I would call a Yaesu Dealer such
as Burghardt Amateur Supply or another 1-800-Yaesu Dealer for the best
price and install recommendations. I purchased all the filters for my FT1000
from Yaesu because I was concerned with quality control and did not shop
any after market vendors.
<p>Bubs
<p>David Jordan wrote:
<blockquote TYPE=CITE>Hi Folks,
<p>I understand that owners of the FT-1000, 1000D, and perhaps the 1000MP
<br>can make a siginificant improvement in selectivity of the radio by
<br>replacing the first IF crystal filter, the 12khz 70mhz IF filter.
The
<br>fitler is intentional wide to allow FM transmissions. However,
if you
<br>have no intentions of using the radio in wide-band mode you can install
<br>a 6khz or 3khz filter in place of the original equipment filter.
<p>SO, where can I find such a filter for my FT-1000D?
International??
<p>thanks,
<br>dave
<br>WA3GIN
<p>--
<br>FAQ on
WWW:
<a
href="http://www.qsl.net/k7on/yaesu.html";>http://www.qsl.net/k7on/yaesu.html</a>
<br>Submissions:
yaesu@contesting.com
<br>Administrative requests: yaesu-REQUEST@contesting.com
<br>Problems:
owner-yaesu@contesting.com
<br>Search:
<a
href="http://www.contesting.com/km9p/search.htm";>http://www.contesting.com/km9p/search.htm</a></blockquote>
--
<br>
<p>THOSE THAT CAN, DX! THOSE THAT CAN'T, DX ON NETS !
<br> </html>
--------------23761C61287DC0AC2DB37874--
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|