Thanks Rich - is that something separate from the RF GAIN knob?
> Chech your drive knob
> In a message dated 1/30/2010 4:15:51 P.M. Eastern Standard Time,
> bcarling@cfl.rr.com writes:
> Hi guys,
>
> I have a Yaesu FT920 that has low RF power output.
> Seems like I can only get 1 watt or so out of it in any mode.
>
> Before I go troubleshooting or looking for a repair facility, I
> wonder
> if maybe there is anything I could have overlooked in how I
> have
> it set up? I am using a dipole with a Palstar Tuner and I am
> not
> using the internal tuner. The SWR is 1:1
>
> Also, of course, the "RF POWER" knob is turned up all the way.
>
> Is there anything that I might be forgetting that could be set
> wrong to cause this?
>
> I am going to check the MENU for the port settings for each
> antenna
> and see if the power is set low. Maybe do a RESET of the
> system.
>
> I have about 1 amp into the radio on receive and about 5 amps
> on transmit. On certain bands and with certain settings, I seem
> to
> get a little more power out.
>
> Have others seen this problem, and what did you do to fix it?
>
> Regards - Brian, AF4K
>
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|