Yaesu
[Top] [All Lists]

[Yaesu] FT-900 NB Mod

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-900 NB Mod
From: donald.s.tucker@exgate.tek.com (donald.s.tucker@exgate.tek.com)
Date: Wed, 7 Jul 1999 14:47:41 -0700
The value I ended up with is 10K, which is what Yaesu recommended. Made all
the difference in the world over the original performance. I can send you a
copy of the board photo marked if it would help (address needed).  I have
the Service Manual.

Don W7WLL

-----Original Message-----
From: Patrick Martin [mailto:py2zb@hotmail.com]
Sent: Wednesday, July 07, 1999 11:57 AM
To: yaesu@contesting.com
Subject: [Yaesu] FT-900 NB Mod



Hello everyone,

I know that quite a bit has been posted here on the FT-900 mod that improves

the NB performance.

Can anyone provide me with detailed information on where the resistor to be 
changed is located on the RF board? What value does a good job? I've heard 
anything between 5 and 15 kiloohms.

I heard that the NB problem was only existent in early models of the FT-900.

Any comments on that?

Thank's for any help.

Patrick Martin - PY2ZB


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>