Yaesu
[Top] [All Lists]

[Yaesu] FT-920 SSB filter

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-920 SSB filter
From: mdowning@wm7d.net (Mark A. Downing)
Date: Thu, 3 Jan 2002 08:29:27 -0800 (PST)
I've got both the 1.8 and the 2.0 SSB filters along with a couple of CW
filters in mine. Originally, I had installed only one SSB filter, then
George (at my request) designed a board that allows you to have more
than one filter in the 920.

Removing the main board to install the filter is really not that big of
a deal. It's a lot of screws and you have to move a few wires around, but
it can be done.

--Mark (WM7D)


On Thu, 3 Jan 2002 dick@ny1e.com wrote:

> My only complaint about my 920 is the lack of a narrow SSB filter, has
> anyone replaced the factory one with a narrower International Radio
> filter? I'm not sure I'd want 1.8 full time, but maybe I could live with
> a 2.0           How much of a job was it getting to the back side of
> that board???

-- 
http://www.wm7d.net/
http://www.wm7d.net/fcc_uls/ulsquery.html


<Prev in Thread] Current Thread [Next in Thread>