Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

October 31, 2009

Re: [Amps] Turns Counter, k7rdx, 19:14
Re: [Amps] Turns Counter, Bill, W6WRT, 18:37
Re: [Amps] 4PR1000 initial run up?, Carl, 18:02
Re: [Amps] Turns Counter, Alek Petkovic, 17:27
[Amps] 4PR1000 initial run up?, Andy GD0TEP, 16:01
[Amps] Turns Counter, JTB ô¿ô, 15:04
Re: [Amps] SRS 360?, Carl, 14:21
[Amps] SRS 360?, Paul Gerhardt, 14:10
Re: [Amps] Alpha 76 meter, Carl, 13:10
[Amps] Alpha 76 meter, N7DF, 10:42

October 29, 2009

Re: [Amps] TL922 Power Plugs, Ian Hill - K8MM, 15:17
Re: [Amps] TL922 Power Plugs, Bill, 13:41
Re: [Amps] TL922 Power Plugs, Gary Smith, 12:50
Re: [Amps] TL922 Power Plugs, markrob, 11:20
Re: [Amps] TL922 Power Plugs, Doug Renwick, 11:03
Re: [Amps] TL922 Power Plugs, markrob, 08:23
Re: [Amps] TL922 Power Plugs, Robert Groh, 07:28
Re: [Amps] IC-2KL 80m toroid value, Manfred Mornhinweg, 05:34

October 28, 2009

[Amps] TL922 Power Plugs, Allan W Schlaugat, 22:34
[Amps] Looking for a Heathkit KL-1 Chippewa Amp, Jon Schmidt, 21:48
Re: [Amps] Eimac tube on the 'bay, Dr. David Kirkby, 15:48
Re: [Amps] IC-2KL 80m toroid value, Carl, 11:24
Re: [Amps] IC-2KL 80m toroid value, Jim Brown, 11:11
Re: [Amps] Alpha 76, Carl, 10:35
Re: [Amps] IC-2KL 80m toroid value, Carl, 09:55
[Amps] Alpha 76, k9sd, 09:42
Re: [Amps] IC-2KL 80m toroid value, Jim Brown, 08:46
[Amps] Elmac tubes, david sutton, 07:31

October 27, 2009

[Amps] Elmac tubes, david sutton, 22:01
[Amps] IC-2KL Band switch, oz1lxj, 11:50
Re: [Amps] IC-2KL 80m toroid value, Carl, 06:17

October 26, 2009

Re: [Amps] IC-2KL 80m toroid value, Charles Harpole, 20:25
Re: [Amps] IC-2KL 80m toroid value, Phil Clements, 20:00
[Amps] Centurion amp problem, Georgens, Tom, 19:27
[Amps] IC-2KL 80m toroid value, Brian Moran, 18:54
[Amps] TL-922a and IC-718, steve d, 16:09
Re: [Amps] TL-922 is buzzing, Alek Petkovic, 16:02
[Amps] TL-922 is buzzing, Szegedy, 15:31
[Amps] Amplifiers for Sale, K9OQ, 12:59
Re: [Amps] sk610a datasheet?, Felipe Ceglia - PY1NB, 10:38
[Amps] sk610a datasheet?, Felipe Ceglia - PY1NB, 09:05

October 25, 2009

Re: [Amps] AL 80B, Carl, 16:54
Re: [Amps] AL 80B, Steve Katz, 16:46
Re: [Amps] AL 80B, Roger, 14:43
Re: [Amps] AL 80B, Steve Katz, 14:30
[Amps] AL 80B, Phil LaMarche, 11:40

October 24, 2009

[Amps] Fw: Collins HV Xfmr For Sale, John Farber, 17:55
[Amps] Collins HV Xfmr For Sale, John Farber, 17:09
Re: [Amps] AL-1200 Relay Confusion, gudguyham, 11:23
Re: [Amps] AL-1200 Relay Confusion, donroden, 08:27
Re: [Amps] Searching for a 110v 5w Zener, Carl, 08:09
Re: [Amps] Searching for a 110v 5w Zener, David Cutter, 07:59
Re: [Amps] Searching for a 110v 5w Zener, Andy GD0TEP, 07:51
Re: [Amps] Searching for a 110v 5w Zener, David Cutter, 07:17
[Amps] Searching for a 110v 5w Zener, Andy GD0TEP, 05:31

October 23, 2009

[Amps] AL-1200 Relay Confusion, RICHARD SOLOMON, 20:12
Re: [Amps] cooked exciter -, Cliff Frescura, 10:53
[Amps] cooked exciter -, chuck, 10:49
Re: [Amps] 3cpx1500/a7 for sale, Mike, 07:22
Re: [Amps] Yokogawa P9306ul, bill price, 07:14
Re: [Amps] 3cpx1500/a7 for sale, Jan Svabenik, 06:39
[Amps] 3cpx1500/a7 for sale, Dennis OConnor, 05:26
Re: [Amps] 3cpx1500/a7 for sale, Dave White, 03:09
Re: [Amps] KY-96A, Roger, 01:17

October 22, 2009

[Amps] KY-96A, Bob Moody, 22:50
[Amps] Yokogawa P9306ul, MIKE DURKIN, 22:02
Re: [Amps] 3cpx1500/a7 for sale, Carl, 13:19
Re: [Amps] 3cpx1500/a7 for sale, DAVE WHITE, 12:46
Re: [Amps] 3cpx1500/a7 for sale, Carl, 11:02
Re: [Amps] 3cpx1500/a7 for sale, NE6V, 10:51
Re: [Amps] 3cpx1500/a7 for sale, Cliff Frescura, 10:29
Re: [Amps] 3cpx1500/a7 for sale, Gary Smith, 10:27
Re: [Amps] 3cpx1500/a7 for sale, Carl, 10:18
[Amps] 3cpx1500/a7 for sale, Jan Svabenik, 10:10
Re: [Amps] tank calculations - need input, Chuck Partain, 09:04
[Amps] {Collins} 30S-1 - rectifier tube for sale?, dd3ly, 09:04
[Amps] Harris Am-7223 or RF-355 Amp info, Kirk Mohror, 09:04
[Amps] {Collins} 30S-1 - rectifier tube for sale?, dh5ak, 00:58

October 21, 2009

Re: [Amps] Fw: {Collins} 30S-1, Gary K9GS, 20:30
[Amps] Fw: {Collins} 30S-1, Gary Smith, 11:43
Re: [Amps] {Collins} 30S-1, Bill Fuqua, 07:57
[Amps] Choke from Warrior HA-10 amp, k5jv, 07:23
Re: [Amps] {Collins} 30S-1, kingwood, 05:48

October 20, 2009

Re: [Amps] {Collins} 30S-1, Carl, 17:07
[Amps] {Collins} 30S-1, kingwood, 15:07
[Amps] email: rolofears7@yahoo.com, lonnie fears, 14:27
[Amps] 4CX-1000/1500 in Collins 30S-1, kingwood, 11:44
Re: [Amps] Ts-940s linear relay, k9mk, 08:30
Re: [Amps] Ts-940s linear relay, Carl, 08:16
[Amps] Ts-940s linear relay, chuck, 05:13

October 19, 2009

Re: [Amps] Henry 3K up and running!, Carl, 18:41
Re: [Amps] Henry 3K up and running!, Dave Harmon, 16:15
Re: [Amps] Peter Dahl XFMR question (I Have one!) THANKS ALL!!, donroden, 14:29
Re: [Amps] Peter Dahl XFMR question (I Have one!), donroden, 13:58
Re: [Amps] EF Johnson Tube socket catalog (pdf) available, Bill, W6WRT, 13:58
Re: [Amps] EF Johnson Tube socket catalog (pdf) available, mikea, 13:27
[Amps] EF Johnson Tube socket catalog (pdf) available, Robert Groh, 12:45
Re: [Amps] Henry 3K up and running!, mikea, 12:28
[Amps] Henry 3K up and running!, Donald Fox, 12:23
[Amps] tank calculations - need input, chuck, 11:40
Re: [Amps] Peter Dahl XFMR question (I Have one!), Rob Atkinson, 09:34
Re: [Amps] Peter Dahl XFMR question (I Have one!) THANKS ALL!!, Carl, 09:26
Re: [Amps] Peter Dahl XFMR question (I Have one!) THANKS ALL!!, David Jordan, 08:26
Re: [Amps] Peter Dahl XFMR question (I Have one!), Bob Nielsen, 08:23
Re: [Amps] Peter Dahl XFMR question (I Have one!) THANKS ALL!!, mikea, 08:06
Re: [Amps] Peter Dahl XFMR question (I Have one!) THANKS ALL!!, Van K7VS, 08:00
Re: [Amps] Peter Dahl XFMR question (I Have one!), Carl, 07:26
Re: [Amps] Peter Dahl XFMR question (I Have one!), Carl, 07:14
Re: [Amps] Peter Dahl XFMR question (I Have one!), donroden, 07:13
Re: [Amps] Peter Dahl XFMR question (I Have one!), mikea, 07:08
Re: [Amps] Peter Dahl XFMR question (I Have one!), Carl, 06:43
Re: [Amps] Peter Dahl XFMR question (I Have one!), mikea, 06:33
Re: [Amps] Peter Dahl XFMR question (I Have one!), Carl, 06:27

October 18, 2009

Re: [Amps] Peter Dahl XFMR question (I Have one!), Roger, 23:03
Re: [Amps] Peter Dahl XFMR question (I Have one!), Robert Morris, 22:34
[Amps] Peter Dahl XFMR question (I Have one!), Van K7VS, 21:57
Re: [Amps] tank calculations - need input, DF3KV, 18:02
Re: [Amps] tank calculations - need input, jeff millar, 17:42
[Amps] SB-220 Top Cover, RICHARD SOLOMON, 11:12
Re: [Amps] tank calculations - need input, DF3KV, 10:48
[Amps] Amps Digest, Vol 82, Issue 34, BEHIELS JEAN-PIERRE, 07:36
Re: [Amps] Amps Digest, Vol 82, Issue 34, BEHIELS JEAN-PIERRE, 07:23
Re: [Amps] tank calculations - need input, jeff millar, 06:32
Re: [Amps] tank calculations - need input, ka1mwp, 05:02

October 17, 2009

Re: [Amps] tank calculations - need input, Roger, 19:45
Re: [Amps] tank calculations - need input, ka1mwp, 16:10
Re: [Amps] tank calculations - need input, Bill, W6WRT, 16:04
Re: [Amps] tank calculations - need input, jeff millar, 14:33
[Amps] tank calculations - need input, ka1mwp, 13:50

October 16, 2009

Re: [Amps] HELP...2x GS35b, DF3KV, 14:58
Re: [Amps] Fw: 8874 Pulls, Paul Playford, 13:48
[Amps] 8875s needed, n8de, 13:37
[Amps] Fw: 8874 Pulls, Joe Dube, 13:09
Re: [Amps] Blower Restrictor QU?, Roger, 11:17
Re: [Amps] Blower Restrictor QU?, Paul Gerhardt, 09:08
Re: [Amps] HELP...2x GS35b, Thomas Hoeppe, 08:41
Re: [Amps] HELP, Bill, W6WRT, 05:24
[Amps] RE Feed thru caps, Dennis A. Homerick, 04:04
[Amps] HELP, BEHIELS JEAN-PIERRE, 02:39

October 15, 2009

[Amps] feed thru caps, Dennis A. Homerick, 17:39
Re: [Amps] Blower Restrictor QU?, Alek Petkovic, 15:46
Re: [Amps] Blower Restrictor QU?, Donald Fox, 15:41
Re: [Amps] Blower Restrictor QU?, Mike, 14:39
Re: [Amps] Henry transformer info., Roger, 14:32
Re: [Amps] Blower Restrictor QU?, W5CPT, 13:58
Re: [Amps] Blower Restrictor QU?, Roger, 13:53
Re: [Amps] Henry transformer info., Philip Leonard WVØT, 13:03
Re: [Amps] Blower Restrictor QU?, donroden, 12:35
[Amps] Blower Restrictor QU?, Paul Gerhardt, 11:31

October 14, 2009

Re: [Amps] Henry transformer info., bill price, 20:21
[Amps] Henry transformer info., Donald Fox, 17:35

October 13, 2009

Re: [Amps] Checking Plate Choke resonance, Larry Benko, 22:03
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 21:45
Re: [Amps] Checking Plate Choke resonance, Gary Schafer, 21:19
Re: [Amps] Checking Plate Choke resonance, Larry Benko, 20:45
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 20:05
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 19:51
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 19:43
[Amps] Checking for Resonance in Plate RF Chokes, fsiyfr, 19:42
Re: [Amps] Checking Plate Choke resonance, Larry Benko, 18:37
Re: [Amps] Checking Plate Choke resonance, Carl, 18:18
Re: [Amps] Checking Plate Choke resonance, Jeff Blaine AC0C, 18:08
Re: [Amps] Checking Plate Choke resonance, DF3KV, 17:59
Re: [Amps] Checking Plate Choke resonance, Carl, 17:36
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 16:24
Re: [Amps] Eimac tube on the 'bay, Alek Petkovic, 14:47
Re: [Amps] Eimac tube on the 'bay, Alek Petkovic, 14:40
Re: [Amps] Checking Plate Choke resonance, Gary Schafer, 11:03
Re: [Amps] Eimac tube on the 'bay, DF3KV, 10:46
Re: [Amps] Checking Plate Choke resonance, Vic K2VCO, 09:53
Re: [Amps] Checking Plate Choke resonance, Jim Tonne, 09:42
Re: [Amps] Checking Plate Choke resonance, Carl, 09:18
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 09:03
Re: [Amps] Eimac tube on the 'bay, mikea, 07:39
Re: [Amps] Eimac tube on the 'bay, Alek Petkovic, 02:51
Re: [Amps] Eimac tube on the 'bay, Alek Petkovic, 02:38

October 12, 2009

Re: [Amps] Checking Plate Choke resonance, Hardy Landskov, 23:17
Re: [Amps] Eimac tube on the 'bay, Gary Schafer, 21:15
Re: [Amps] Eimac tube on the 'bay, k7rdx, 18:31
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 16:44
Re: [Amps] GU74 and all voltages on the same transformer?, Bill, W6WRT, 16:38
Re: [Amps] Eimac tube on the 'bay, Alek Petkovic, 16:27
Re: [Amps] Eimac tube on the 'bay, Roger, 15:59
Re: [Amps] Checking Plate Choke resonance, DF3KV, 10:46
Re: [Amps] Checking Plate Choke resonance, Carl, 07:35
Re: [Amps] Checking Plate Choke resonance, DF3KV, 06:04
Re: [Amps] Eimac tube on the 'bay, Alek Petkovic, 02:45
[Amps] GU74 and all voltages on the same transformer?, Ulf Tjerneld, 00:23

October 11, 2009

Re: [Amps] Eimac tube on the 'bay, Roger, 23:36
Re: [Amps] Eimac tube on the 'bay, Roger, 19:48
Re: [Amps] Eimac tube on the 'bay, Larry, 19:27
Re: [Amps] Eimac tube on the 'bay, Jim W7RY, 19:25
Re: [Amps] Eimac tube on the 'bay, Roger, 19:16
[Amps] Eimac tube on the 'bay, Larry, 18:33
[Amps] For Sale: WE 30S-1, Phil LaMarche, 08:24
Re: [Amps] Checking Plate Choke resonance, Bill, W6WRT, 07:34

October 10, 2009

Re: [Amps] Autek Research WM-1 wattmeter, Jeff Carter, 17:12
Re: [Amps] Autek Research WM-1 wattmeter, Lee Buller, 08:47
Re: [Amps] Autek Research WM-1 wattmeter, Jeff Carter, 08:32
[Amps] Checking Plate Choke resonance, rich ferguson, 08:24
Re: [Amps] How high can I go with this amp?, Carl, 08:22
Re: [Amps] How high can I go with this amp?, Jim Tonne, 08:01
Re: [Amps] How high can I go with this amp?, jeff millar, 07:54
[Amps] Autek Research WM-1 wattmeter, Charles Harpole, 06:48
[Amps] How high can I go with this amp?, Steve Flood, 04:52

October 09, 2009

Re: [Amps] Henry 2K-2, Carl, 13:53
Re: [Amps] Henry 2K-2, AB5MM, 12:36
Re: [Amps] FL-2100b, Carl, 11:48
Re: [Amps] FL-2100b, Steve Katz, 11:35
[Amps] FL-2100b, AA9YP, 11:33
Re: [Amps] Henry 2K-2, George Cortez, 11:32
[Amps] RFC L7 for TL-922, slonim aron, 10:46
[Amps] rfc l7 for TL-922, slonim aron, 10:31
Re: [Amps] filament choke questions, Bill, W6WRT, 09:40
Re: [Amps] AMP Supply LK800-NTC Tuning?, Carl, 07:03
Re: [Amps] filament choke questions, Martin, 06:33

October 08, 2009

[Amps] AMP Supply LK800-NTC Tuning?, klahaie, 23:00
Re: [Amps] Henry 2K-2, Mike McCarthy, W1NR, 17:44
Re: [Amps] filament choke questions, Don Kessler, 17:29
Re: [Amps] filament choke questions, Carl, 17:24
Re: [Amps] filament choke questions, Don Kessler, 16:58
Re: [Amps] Pictures of number 1, Bill W5WVO, 16:50
Re: [Amps] Pictures of number 1, Bill W5WVO, 16:41
Re: [Amps] Henry 2K-2, Robert Morris, 11:47
[Amps] 3-500Z vs 4-400A Height, BobK8IA, 09:46
Re: [Amps] Henry 2K-2, donroden, 09:39
Re: [Amps] Henry 2K-2, Paul Playford, 09:16
[Amps] Henry 2K-2, Robert Perdue, 07:38
Re: [Amps] Pictures of number 1, Roger, 07:32
[Amps] Pictures of number 1, Paul Decker, 06:29
Re: [Amps] SB220 transformer capability, Carl, 05:49
Re: [Amps] filament choke questions, Roger Parsons, 04:43
[Amps] SB220 transformer capability, Steve Flood, 04:08

October 07, 2009

Re: [Amps] filament choke questions, Han Higasa, 21:57
[Amps] WTB: Pair of good 3cx800's or 3cpx800's, Rich Hallman - N7TR, 20:58
[Amps] filament choke questions, Paul Decker, 08:45

October 06, 2009

[Amps] Bird 43 Meter Repair - Completed!, Val Erwin, 16:35
Re: [Amps] cca am-1000d, Steven Grant, W4IIV, 12:57
Re: [Amps] AL-80A SB-1000 Transformer Needed, Carl, 07:13
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, kingwood, 05:31

October 05, 2009

Re: [Amps] SWR meters, Roger, 21:56
[Amps] AL-80A SB-1000 Transformer Needed, Jim W7RY, 21:51
Re: [Amps] Need bushing, Hardy Landskov, 19:56
Re: [Amps] Need bushing, k7rdx, 19:56
Re: [Amps] Need bushing, TexasRF, 19:22
[Amps] Need bushing, k7rdx, 18:34
Re: [Amps] cca am-1000d, Ken, 17:17
Re: [Amps] cca am-1000d, Ken, 17:13
Re: [Amps] SWR meters, Bill, W6WRT, 17:11
Re: [Amps] cca am-1000d, Pete Raymond, N4KW, 16:48
Re: [Amps] cca am-1000d, KA4RFA - Jim Stewart, 16:18
Re: [Amps] cca am-1000d, Ron Youvan, 15:53
Re: [Amps] filament voltage, Ron Youvan, 15:50
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Roger, 15:44
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Carl, 14:19
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Carl, 14:12
Re: [Amps] PEP Reading Wattmeter, Paul Playford, 13:53
Re: [Amps] PEP Reading Wattmeter, Jim Tonne, 13:52
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Pete Smith, 13:49
Re: [Amps] PEP Reading Wattmeter, Steve Thompson, 13:46
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Glen Zook, 13:45
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Paul Playford, 13:44
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, n8de, 13:26
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, n8de, 13:24
Re: [Amps] Amps Digest, Vol 82, Issue 13, Edwin Karl, 13:20
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, mikea, 13:11
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Phil Clements, 13:09
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Carl, 13:06
Re: [Amps] filament voltage, Phil Clements, 12:47
[Amps] filament voltage, Paul Decker, 12:35
Re: [Amps] SWR meters, Roger, 12:10
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, n8de, 11:13
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Carl, 11:01
[Amps] To keep amps,or not to keep amps..., Tom Martin, 10:26
Re: [Amps] cca am-1000d, Randall, Randy, 09:52
[Amps] Replacement blower for a Titan 425, Robert Morris, 09:16
Re: [Amps] AL 1500 P.O. Meter Function, Fern, 08:36
[Amps] cca am-1000d, KA4RFA - Jim Stewart, 08:36
Re: [Amps] Watts to DBM??, Bill, W6WRT, 07:42
Re: [Amps] SWR meters, Bill, W6WRT, 07:31
Re: [Amps] Watts to DBM??, Jim Forsyth, 06:05
Re: [Amps] Watts to DBM??, Steve Flood, 04:00
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Fortra, 02:21
[Amps] sell LK-500-NTC v. SB-220 v. Clipperrton L, Charles Harpole, 02:17
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Bill, W6WRT, 02:08

October 04, 2009

[Amps] amp list, Charles Harpole, 22:55
Re: [Amps] Bird 43 Meter Repair Query, Han Higasa, 22:45
Re: [Amps] AL 1500 P.O. Meter Function, Larry Benko, 22:11
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, RICHARD SOLOMON, 21:56
[Amps] SWR meters, Charles Harpole, 21:45
Re: [Amps] AL 1500 P.O. Meter Function, Joe Subich, W4TV, 21:26
Re: [Amps] AL 1500 P.O. Meter Function, Dave Hachadorian, 19:33
Re: [Amps] Bird 43 Meter Repair Query, Jeff Carter, 19:23
Re: [Amps] Suggestion....., Bill, W6WRT, 19:21
Re: [Amps] AL 1500 P.O. Meter Function, Roger, 19:13
Re: [Amps] Bird 43 Meter Repair Query, Bill, W6WRT, 19:13
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, Carl, 19:03
[Amps] AL 1500 P.O. Meter Function, MICHAEL HUGHES, 18:50
Re: [Amps] LK-500-NTC v. SB-220 v. Clipperrton L, RICHARD SOLOMON, 18:46
[Amps] LK-500-NTC v. SB-220 v. Clipperrton L, CAA357, 17:51
Re: [Amps] Suggestion....., Roger, 14:14
Re: [Amps] Suggestion....., Bill Russell, 13:49
Re: [Amps] Suggestion....., Jack Parker, 13:22
Re: [Amps] Suggestion....., Gary K9GS, 12:21
Re: [Amps] Bird 43 Meter Repair Query, Carl, 11:56
Re: [Amps] Bird 43 Meter Repair Query, Missouri Guy, 09:59
Re: [Amps] Suggestion....., George Fremin III, 09:40
Re: [Amps] Suggestion....., Fern, 09:20
[Amps] Professional 1kWcw QSK-T/R-Switch, dd3ly, 09:19
[Amps] Bird 43 Meter Repair Query, Val Erwin, 09:16
Re: [Amps] Vernier dials, have one but..., TexasRF, 06:18
[Amps] TL-922 trouble, hatanaka, 04:01

October 03, 2009

Re: [Amps] Vernier dials, have one but..., Roger, 22:03
Re: [Amps] Vernier dials, have one but..., Charles Harpole, 20:22
Re: [Amps] Suggestion....., Ron Youvan, 14:40
[Amps] (no subject), mikflathead, 14:04
Re: [Amps] switching cavaties in the AM-6155 Amp, Tom & Martha, 13:55
Re: [Amps] Suggestion....., Jim Dawson, 13:09
Re: [Amps] Suggestion....., Roger, 12:38
Re: [Amps] Vernier knobs?, ToddRoberts2001, 11:27
Re: [Amps] Vernier knobs?, Carl, 11:21
Re: [Amps] Suggestion....., Mike, 11:11
Re: [Amps] Suggestion....., Bob Nielsen, 11:10
Re: [Amps] Suggestion....., Joe Subich, W4TV, 10:55
Re: [Amps] Vernier knobs?, Roger, 10:37
[Amps] Suggestion....., Jim Dawson, 10:27
Re: [Amps] Vernier knobs?, John E. Cleeve, 09:06
Re: [Amps] Vernier knobs?, Carl, 06:36
Re: [Amps] switching cavaties in the AM-6155 Amp, jmltinc, 05:32
[Amps] am-6154 cavities, mikflathead, 05:31
[Amps] switching cavaties in the AM-6155 Amp, Tom & Martha, 05:24
Re: [Amps] Vernier knobs?, John E. Cleeve, 02:11

October 02, 2009

Re: [Amps] Vernier knobs?, Robert Morris, 21:49
Re: [Amps] old mags, Bill, W6WRT, 17:30
Re: [Amps] Vernier knobs?, Mark Robinson, 17:15
[Amps] Vernier knobs?, Roger, 17:11
Re: [Amps] PEP Wattmeter, Rob Atkinson, 16:08
Re: [Amps] PEP Wattmeter, Carl, 15:56
Re: [Amps] PEP Wattmeter, Rob Atkinson, 13:28
Re: [Amps] PEP Wattmeter, Paul Gerhardt, 12:21
Re: [Amps] OT: 160/75 Noise, Roger, 11:19
Re: [Amps] PEP Wattmeter, Rob Atkinson, 10:47
[Amps] OT: 160/75 Noise, MIKE DURKIN, 09:59
Re: [Amps] PEP Reading Wattmeter, Radio WC6W, 09:21
[Amps] Emtron DX-3, donroden, 08:29
[Amps] 3CX800A7, Dennis OConnor, 08:00
Re: [Amps] PEP Reading Wattmeter, Mike, 07:47
[Amps] Continental 312, Dan Michnay, 07:05
[Amps] PEP Reading Wattmeter, Joe Barnes, 05:35
Re: [Amps] PEP Reading Wattmeter, keepwalking188@yahoo.com, 05:16

October 01, 2009

Re: [Amps] PEP Reading Wattmeter, Val Erwin, 22:37
Re: [Amps] PEP Reading Wattmeter, Jim W7RY, 18:43
Re: [Amps] PEP Reading Wattmeter, Han Higasa, 18:28
[Amps] continental 312, KA4RFA - Jim Stewart, 18:19
Re: [Amps] PEP Reading Wattmeter, k7rdx, 17:29
Re: [Amps] PEP Reading Wattmeter, Larry, 17:05
Re: [Amps] PEP Reading Wattmeter, RICHARD SOLOMON, 16:59
Re: [Amps] PEP Reading Wattmeter, Jeff Carter, 16:45
Re: [Amps] PEP Reading Wattmeter, Alek Petkovic, 16:44
Re: [Amps] PEP Reading Wattmeter, Mike, 16:42
Re: [Amps] PEP Reading Wattmeter, W5CPT, 16:42
Re: [Amps] PEP Reading Wattmeter, Bill W5WVO, 16:41
Re: [Amps] load/plate controls (was: old mags, Dummy writers..because.. parasitcs can kill --is), Paul Decker, 16:38
Re: [Amps] PEP Reading Wattmeter, Alek Petkovic, 16:37
Re: [Amps] PEP Reading Wattmeter, Bill, 16:03
Re: [Amps] PEP Reading Wattmeter, Steve Katz, 15:56
[Amps] PEP Reading Wattmeter, RICHARD SOLOMON, 15:53