Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

August 31, 1998

[AMPS] ? Voltage Doublers as Anode Supplies, Scott Townley, 21:43
[AMPS] Teflon source?, Arthur Moe, 20:10
[AMPS] Teflon source?, Roger Rehr, 11:45
[AMPS] Cathode input networks resonant or not?, Rich Measures, 00:56

August 30, 1998

[AMPS] Cathode input networks resonant or not?, Richard W. Ehrhorn, 16:05
[AMPS] Wanted: HL-1KA schematic, km1h@juno.com, 14:04
[AMPS] 6154/6155 Question, Roger Rehr, 09:50
[AMPS] Dentron ML-2500, Kazuo Ohashi, 00:29

August 29, 1998

[AMPS] Dentron ML-2500, Shane NC4SA/KV4I, 21:37
[AMPS] Cathode input networks resonant or not?, Rich Measures, 07:31
[AMPS] 3-phase fan motor - summary, Chris W Tran, 03:57

August 28, 1998

[AMPS] Cathode input networks resonant or not?, Richard W. Ehrhorn, 23:36
[AMPS] High isolation RF amplifers., Jon Ogden, 14:39
[AMPS] high isolation amplifiers, km1h@juno.com, 12:36
[AMPS] filament surges, Rich Measures, 12:35
[AMPS] resonance, Rich Measures, 12:25
[AMPS] heater surge, Peter Chadwick, 11:53
[AMPS] Carbon Composition Resistors (Swamping Network forHalllicrafters HT-33 A amplifier), km1h@juno.com, 11:37
[AMPS] high isolation amplifiers, Peter Chadwick, 09:56
[AMPS] resonance, Peter Chadwick, 07:47
[AMPS] Free conduction cooled tubes., Dave Kirkby, 07:39
[AMPS] High isolation RF amplifers., Dave Kirkby, 07:31
[AMPS] Low Output on 10 meters, John / NS1Z, 06:27
[AMPS] Low Output on 10 meters, Rich Measures, 06:27
[AMPS] filament surges, Peter Chadwick, 05:37
[AMPS] Full QSK, Peter Chadwick, 04:32
[AMPS] 3 ph motors, Peter Chadwick, 04:28

August 27, 1998

[AMPS] Low Output on 10 meters, Bill Turner, W7TI, 22:42
[AMPS] Carbon Composition Resistors (Swamping Network for Halllicrafters HT-33 A amplifier), Jim Zellmer, 20:21
[AMPS] Low Output on 10 meters, Jon Ogden, 10:54
[AMPS] Low Output on 10 meters, Jon Ogden, 10:51
[AMPS] 813 amp, Rich Measures, 07:33
[AMPS] Re: Low Output on 10 meters, Jan-Erik Holm, 03:43
[AMPS] 813 amp, david, 00:14

August 26, 1998

[AMPS] Ten Tec Corsair QSK and the 87A, Richard W. Ehrhorn, 23:18
[AMPS] Low Output on 10 meters, John / NS1Z, 17:36
[AMPS] Low Output on 10 meters, Larry Molitor, 17:35
[AMPS] Low Output on 10 meters, Pete Smith, 10:46
[AMPS] Low Output on 10 meters, Jon Ogden, 10:26
[AMPS] Low Output on 10 meters, John / NS1Z, 06:18
[AMPS] mobile 3cx3000s, craig, 04:30

August 25, 1998

[AMPS] Low Output on 10 meters, Tom Branch, 21:57
[AMPS] Low Output on 10 meters, Jon Ogden, 17:30
[AMPS] mobile 3cx3000s, Jon Ogden, 17:24
[AMPS] High Voltage Connector for L-4B/L-7 Wanted, Joseph J. Duerbusch, 17:18
[AMPS] 3-phase fan motor - help please, Richard Carroll, 15:44
[AMPS] Re: Who sez homebrew is dead?, DavidC, 14:49
[AMPS] Re: Who sez homebrew is dead?, pmarkham, 14:27
[AMPS] mobile 3cx3000s, DavidC, 11:42
[AMPS] mobile 3cx3000s, DavidC, 11:37
[AMPS] re:Frontier Ltd XR3000D`, CATALANO_DENIS_E@hq.navsea.navy.mil, 10:30
[AMPS] re:Frontier Ltd XR3000D`, KA2YKC@aol.com, 09:47
[AMPS] Mobile QRO " Train built Linear Amplifiers ", craig, 06:56
[AMPS] SB-220 conversion for 50MHz, John / NS1Z, 06:45
[AMPS] mobile 3cx3000s corrected, craig, 06:40
[AMPS] mobile 3cx3000s, craig, 06:29
[AMPS] Full QSK for the SB-200, Rich Measures, 04:31
[AMPS] 3-phase fan motor - help please, Dave Kirkby, 04:10
[AMPS] Full QSK for the SB-200, Richard Carroll, 00:52

August 24, 1998

[AMPS] SB-220 conversion for 50MHz, DavidC, 23:24
[AMPS] Full QSK for the SB-200, Rich Measures, 23:24
[AMPS] SB-220 conversion for 50MHz, Lloyd Frink, 23:03
[AMPS] Full QSK for the SB-200, Tom Branch, 22:33
[AMPS] Full QSK for the SB-200, DavidC, 21:30
[AMPS] Full QSK for the SB-200, Tom Branch, 20:58
[AMPS] Re: SM-220/BS8, DavidC, 19:46
No subject, david, 18:48
[AMPS] SB-220 conversion for 50MHz, Jon Ogden, 18:47
[AMPS] Full QSK for the SB-200, Jon Ogden, 18:14
[AMPS] 3-phase fan motor - help please, Chris W Tran, 17:18

August 23, 1998

[AMPS] 3CX3000F7 design criteria, Rich Measures, 16:22

August 22, 1998

[AMPS] 3CX3000F7 design criteria, Alastair Beaton, 19:12
[AMPS] Ten Tec Corsair QSK and the 87A, Jim Reid, 18:05

August 21, 1998

FW: [AMPS] hot switching, Richard W. Ehrhorn, 12:08
[AMPS] Alpha PA-70V & Tubing Resources, Paul Christensen, 12:01
[AMPS] Alpha 78 for sale., Albert L. Bailey Jr., 09:14
[AMPS] Plastics at 10Ghz, Paul Hrivnak, 03:46
[AMPS] Properties of plastics at 10 GHz, Rich Measures, 03:43

August 20, 1998

[AMPS] Properties of plastics at 10 GHz, Richard W. Ehrhorn, 23:18
[AMPS] Kenwood TS450 & SB-200??, Rich Measures, 01:49
[AMPS] 811 GG tuned input?, João Kolar De Marco, 00:42

August 19, 1998

[AMPS] Kenwood TS450 & SB-200??, Tom Branch, 18:55
[AMPS] hot switching, Pete Smith, 14:20
[AMPS] hot switching, David J. Riehl, 13:05
[AMPS] Kenwood TS450 & SB-200??, Rich Measures, 10:50

August 18, 1998

[AMPS] BIAS, C. Tortonese, LW1DX, 21:08
[AMPS] MLA-2500 on 6M ???, Rich Measures, 10:23
[AMPS] MLA-2500 on 6M ???, Dick Hanson, 08:15
[AMPS] MLA-2500 on 6M ???, Bob Dodson WB5APD EM84ak, 03:41

August 17, 1998

[AMPS] Kenwood TS450 & SB-200??, Tom Branch, 18:44
[AMPS] Powerline filter 120/230 VAC, Michael Peters, 15:52
[AMPS] Kenwood TS450 & SB-200??, Roger D. Johnson, 15:33
FW: [AMPS] Kenwood TS450 & SB-200??, Geurts, Gerard, 12:01
[AMPS] TOKYO HY-Power 2M AMP ?, Jon Ogden, 11:17
[AMPS] hot switching, Peter Chadwick, 04:59
[AMPS] Plastics, Peter Chadwick, 04:48
[AMPS] Kenwood TS450 & SB-200??, Geurts, Gerard, 03:29

August 16, 1998

[AMPS] Kenwood TS450 & SB-200??, Jon Ogden, 17:14
[AMPS] Re: Properties of plastics at 10 GHz, Jon Ogden, 16:28
[AMPS] TOKYO HY-Power 2M AMP ?, Old Timer, 11:56

August 15, 1998

[AMPS] FS: HV CAP BANK, Norman Hockler, 13:21

August 14, 1998

[AMPS] Kenwood TS450 & SB-200??, zeitler@ibm.net, 20:55
[AMPS] Kenwood TS450 & SB-200??, Rich Measures, 20:43
[AMPS] Kenwood TS450 & SB-200??, Tom Branch, 20:12
[AMPS] Kenwood TS450 & SB-200??, Roger D. Johnson, 20:01
[AMPS] Date Code SB-200, wb8jkr@juno.com, 19:42
[AMPS] Date Code SB-200, Tom Branch, 19:32
[AMPS] Kenwood TS450 & SB-200??, Tom Branch, 18:14
[AMPS] ALC - an elementary question, Rich Measures, 18:08
[AMPS] ALC - an elementary question, DavidC, 18:08
[AMPS] Kenwood TS450 & SB-200??, Rich Measures, 18:02
[AMPS] ALC - an elementary question, Rich Measures, 18:02
[AMPS] [Fwd: TS450/850 & SB-200 Keying], Joseph J. Duerbusch, 17:23
[AMPS] ALC - an elementary question, Roger D. Johnson, 16:45
[AMPS] ALC - an elementary question, Pete Smith, 15:55
[AMPS] G8WRB's response to Boyd Fulbright's false accusations., Boyd, 14:03
[AMPS] Bleeder Resistor, Rich Measures, 12:54
[AMPS] G8WRB's response to Boyd Fulbright's false accusations., Dave Kirkby, 12:34
[AMPS] Bleeder Resistor, Radiodan W7RF, 12:32
[AMPS] Bleeder Resistor, Boyd, 09:57
[AMPS] Frontier Electronics URL, Paul Christensen, 09:38
[AMPS] Bleeder Resistor, Dave Kirkby, 08:10
[AMPS] Bleeder Resistor, Carsten Esch, 06:14
[AMPS] Properties of plastics at 10 GHz, Douglas Bradford, 05:40
[AMPS] Kenwood TS450 & SB-200??, Rich Measures, 00:10

August 13, 1998

[AMPS] Kenwood TS450 & SB-200??, Tom Branch, 22:33
[AMPS] Rectifiers, Boyd, 21:47
[AMPS] TNX 4-1000a, Pinky & The Brain, 20:18
[AMPS] Properties of plastics at 10 GHz, Rich Measures, 19:47
[AMPS] Heath HM-102, ww0e@juno.com, 17:40
[AMPS] Properties of plastics at 10 GHz, Douglas Bradford, 17:31
[AMPS] Properties of plastics at 10 GHz, John Nelson, 17:26
[AMPS] Properties of plastics at 10 GHz, Jon Ogden, 15:49
[AMPS] OE9PMJ TH308 cicuit and EHT protection circuit wanted., Conrad Farlow, 15:34
[AMPS] Properties of plastics at 10 GHz, Rich Measures, 11:12
[AMPS] Properties of plastics at 10 GHz, Dave Kirkby, 10:34
[AMPS] Properties of plastics at 10 GHz, bob alexander, 07:23
[AMPS] Properties of plastics at 10 GHz, Douglas Bradford, 05:13
[AMPS] Propeties of plastics at 10 GHz, Michael Tope, 04:43
[AMPS] Properties of plastics at 10 GHz, Geurts, Gerard, 04:09
[AMPS] Re: Alpha PA-70V, Rich Measures, 03:11

August 12, 1998

[AMPS] WTB - SB-200 meter, ww0e@juno.com, 20:33
[AMPS] Propeties of plastics at 10 GHz, Rich Measures, 13:44
[AMPS] Propeties of plastics at 10 GHz, Jon Ogden, 13:17
[AMPS] Propeties of plastics at 10 GHz, Bob Alexander, 11:13
[AMPS] Propeties of plastics at 10 GHz, Rich Measures, 10:36
[AMPS] Propeties of plastics at 10 GHz, Dave Kirkby, 06:03

August 11, 1998

[AMPS] Fwd: [Hallicrafters] FCC releases restructuringproposal, Alan D. Gray, 19:54
[AMPS] Fwd: [Hallicrafters] FCC releases restructuring proposal, Jon Ogden, 15:11
[AMPS] 866s etc, Rich Measures, 14:44
[AMPS] Linears and AM, Jim Reid, 13:37
[AMPS] Re: [CW] calling cq / fone ops, Bill Turner, W7TI, 08:52
[AMPS] Re: [CW] calling cq / fone ops, Rich Measures, 06:18
[AMPS] testing tubes in place, Rich Measures, 06:18
[AMPS] 866s etc, Peter Chadwick, 06:09
[AMPS] Re: [CW] calling cq / fone ops, Rich Measures, 05:31
[AMPS] testing tubes in place, henry gillow-wiles, 02:29
[AMPS] 4-1000A, Jon Ogden, 01:53
[AMPS] Re: [CW] calling cq / fone ops, Jon Ogden, 01:48
[AMPS] Re: [CW] calling cq / fone ops, Jim Reid, 00:41

August 10, 1998

[AMPS] Re: [CW] calling cq / fone ops, Kenneth D. Grimm, 22:07
[AMPS] 4-1000A, DavidC, 21:05
[AMPS] 4-1000A, Bob Sutton, 20:50
[AMPS] 4-1000A amp design, Bob Sutton, 20:50
[AMPS] Re: [CW] calling cq / fone ops, Jim Reid, 20:45
[AMPS] 4-1000A amp design, Jon Ogden, 18:11
[AMPS] 4-1000A amp design, Jon Ogden, 17:51
[AMPS] 4-1000A amp design, Jon Ogden, 17:49
[AMPS] 4-1000A amp design, Bob Sutton, 17:47
[AMPS] 4-1000A amp design, Bob Sutton, 17:09
[AMPS] 4-1000A amp design, Steve, 16:44
[AMPS] 4-1000A amp design, Jon Ogden, 15:06
[AMPS] 4-1000A amp design, W6RU@aol.com, 14:36
[AMPS] Alpha 78 sale price., Albert L. Bailey Jr., 14:00
[AMPS] 4-1000A amp design, Jon Ogden, 10:25
[AMPS] 4-1000A amp design, Steve Bermudez, 01:26
[AMPS] WTB: 572B Tubes, Barry Anderson, 00:55

August 09, 1998

[AMPS] Dec 73 and Jan 74 QST articles needed, Conrad Farlow, 21:55
[AMPS] 8877 on 2m, Conrad Farlow, 21:19
[AMPS] maximum output from an Alpha 89, Bill Turner, W7TI, 14:02
[AMPS] Thanks a Million!, N9YXA-Cedrick Johnson, 10:33
[AMPS] maximum output from an Alpha 89, Robert W5AJ, 02:45

August 08, 1998

[AMPS] maximum output from an Alpha 89, henry gillow-wiles, 17:29
[AMPS] Carbon Composition Resistors, Rich Measures, 12:15
[AMPS] Carbon Composition Resistors, Robert Wood, 11:04
[AMPS] Alpha Info Needed, Mark S Graalman, 07:58
[AMPS] Alpha Info Needed, Bob Dodson WB5APD EM84ak, 07:15
[AMPS] Maximum out-put from an Alpha 89, henry gillow-wiles, 00:33

August 07, 1998

[AMPS] open pin on 3-500Z, Rich Measures, 23:48
[AMPS] 8877 on 2m, Conrad Farlow, 23:22
[AMPS] open pin on 3-500Z, Matt--K7BG, 22:07
[AMPS] L7 now working, have ops question, Steve Jackson, 16:07
[AMPS] Amp Supply LK-500Z, Richard Thorne, 16:02
[AMPS] L7 now working, have ops question, Steve Jackson, 15:52
[AMPS] L7 now working, have ops question, Steve Jackson, 14:23
[AMPS] amp for sale, Dick Hanson, 09:56
[AMPS] Yaesu/Sommerkamp FL-2000B, Improvements/mods?, pfrenning@idc.com, 08:10
[AMPS] L7 now working, have ops question, George T. Daughters, 07:27
[AMPS] PL 172, Alek Petkovic, 03:51
[AMPS] 8908 sweep tubes, Skip S Isaham, 00:21
[AMPS] PL-172 pentode, Skip S Isaham, 00:21

August 06, 1998

[AMPS] High Voltage and Filament Voltage to the same time?, Rich Measures, 21:30
[AMPS] High Voltage and Filament Voltage to the same time?, Carsten Esch, 12:37
[AMPS] Dentron DTR-2000 vs Dual 3-500z Amps?, Rich Measures, 11:55
[AMPS] Dentron DTR-2000 vs Dual 3-500z Amps?, DavidC, 08:52
[AMPS] Re: 3-600Z, Rich Measures, 03:08

August 05, 1998

[AMPS] L4B Mods?, Jon Ogden, 19:31
[AMPS] Re: 3-600Z, Rich Measures, 19:02
[AMPS] Looking for speces on 8908 sweep tubes, Jim Zellmer, 18:57
[AMPS] L4B Mods?, DavidC, 18:53
[AMPS] PL-172 specs, Jim Zellmer, 18:48
[AMPS] Spec for Amperex 8643?, David Feldman, 18:48
[AMPS] need info on PL-172 pentode, Larry Molitor, 17:58
[AMPS] Re: 3-600Z, Jon Ogden, 17:13
[AMPS] Re: 3-600Z, Martin Ellis, 16:36
[AMPS] Re: [Hallicrafters] [Fwd: need info on PL-172pentode], Alan D. Gray, 11:57
[AMPS] Re: [Hallicrafters] [Fwd: need info on PL-172 pentode], Jon Ogden, 10:53
[AMPS] FYI 3-600Z, Rich Measures, 08:37
[AMPS] power vs. QRM, Rich Measures, 08:08
[AMPS] FYI 3-600Z, Matt--K7BG, 02:38
[AMPS] need info on PL-172 pentode, <km3g@cts.com (Lane C. Zeitler), 01:16

August 04, 1998

[AMPS] 3CV1500A7; what is vapor cooling?, Jon Ogden, 19:51
[AMPS] 3CV1500A7; what is vapor cooling?, Alan D. Gray, 17:15
[AMPS] 3CV1500A7; what is vapor cooling?, Richard W. Ehrhorn, 16:14
[AMPS] technical help..., Jon Ogden, 14:58
[AMPS] technical help..., Rich Measures, 14:26
[AMPS] power vs. QRM, pmarkham, 14:17
[AMPS] technical help..., Litwins, 12:18
[AMPS] power vs. QRM, Douglas Bradford, 07:01
[AMPS] power v QRM, Peter Chadwick, 05:06
[AMPS] power vs. QRM, w3am@juno.com, 01:59

August 03, 1998

[AMPS] power vs. QRM, Jon Ogden, 22:45
[AMPS] power vs. QRM, T A RUSSELL, 21:02
[AMPS] power vs. QRM, w3am@juno.com, 18:05
[AMPS] 3CV1500A7, Paul Christensen, 17:47
[AMPS] 3-500Z date codes, <montytaylor@texoma.net (Monty Taylor), 17:42
[AMPS] 3CV1500A7, Richard W. Ehrhorn, 17:00
[AMPS] power v. QRM, Jon Ogden, 12:44
[AMPS] Re: power vs. QRM, Jon Ogden, 12:41
[AMPS] For Sale......, dtrbizan@netcom.ca, 12:07
[AMPS] power v. QRM, Peter Chadwick, 11:19
[AMPS] power vs. QRM, Paul Booth, 11:16
[AMPS] power vs. QRM, Steve Jackson, 11:13
[AMPS] Drake L7 and 'new' Eimac 3-500Z, Steve Jackson, 11:02
[AMPS] Re: [HeathKit] Starter amp choices ?, Jon Ogden, 10:51
[AMPS] Drake L7 and 'new' Eimac 3-500Z, Steve Jackson, 09:04

August 02, 1998

[AMPS] Re: [HeathKit] Starter amp choices ?, Douglas Bradford, 23:11
[AMPS] Re: [HeathKit] Starter amp choices ?, Jon Ogden, 22:59
[AMPS] 3CV1500A7, Paul Christensen, 20:14
[AMPS] Drake L7 & 3-500Z's, Matt--K7BG, 17:02
[AMPS] Drake L7 and 'new' Eimac 3-500Z, Steve Jackson, 16:51
[AMPS] Henry 3K-A info??, Radiodan W7RF, 14:54
[AMPS] Henry 3K-A info??, Litwins, 14:29

August 01, 1998

[AMPS] Starter amp choices ?, Bill Turner, W7TI, 09:27