Amps Mailing List (date)
September 30, 2000
- [AMPS] SSB spectrum analyzer and 2 tone generator, Phil (VA3UX), 22:20
- [AMPS] collins 30L - 1, measures, 18:42
- [AMPS] collins 30L - 1, K0FF, 17:23
- [AMPS] Wanted L4B manual, jeg, 16:23
- [AMPS] Wanted: Turn counters., Phil Clements, 15:58
- [AMPS] collins 30L - 1, Phil Clements, 15:55
- [AMPS] collins 30L - 1, measures, 14:41
- [AMPS] collins 30L - 1, N6BUU@aol.com, 13:00
- [AMPS] collins 30L - 1, Tom Rauch, 11:26
- [AMPS] Wanted: Turn counters., measures, 11:23
- [AMPS] Wanted: Turn counters., NE2E@aol.com, 10:39
- [AMPS] collins 30L - 1, Phil Levin W2GE, 09:58
- [AMPS] collins 30L - 1, cqki8fh@juno.com, 09:25
September 29, 2000
- [AMPS] Feedback path 3-500Z, measures, 21:43
- [AMPS] Feedback path 3-500Z, Mark S Graalman, 19:36
- [AMPS] Feedback path 3-500Z, Bill Aycock, 18:45
- [AMPS] Feedback path 3-500Z, Maurizio Panicara, 17:20
- [AMPS] test do not read, KB7WW Art Moe, 16:48
- [AMPS] Feedback path 3-500Z, measures, 15:10
- [AMPS] FS: two 3-400Z tubes, measures, 15:10
- [AMPS] Feedback path 3-500Z, measures, 14:56
- [AMPS] Feedback path 3-500Z, N6BUU@aol.com, 14:49
- [AMPS] Feedback path 3-500Z, measures, 14:43
- [AMPS] Feedback path 3-500Z, measures, 14:43
- [AMPS] Feedback path 3-500Z, measures, 14:43
- [AMPS] SB220, measures, 14:43
- [AMPS] Feedback path 3-500Z, Tom Rauch, 14:22
- [AMPS] FS: two 3-400Z tubes, Boyd, 13:25
- [AMPS] Adapter for dummy load needed, Mark Marsden, 10:53
- [AMPS] Adapter for dummy load needed, i4jmy@iol.it, 10:47
- [AMPS] Adapter for dummy load needed, Carsten Esch, 10:12
- [AMPS] Feedback path 3-500Z, i4jmy@iol.it, 09:31
- [AMPS] Need huge bread slicer, Lane Zeitler, 09:03
- [AMPS] AL 1500, cqki8fh@juno.com, 08:38
- [AMPS] Feedback path 3-500Z, Tom Rauch, 07:49
- [AMPS] Feedback path 3-500Z, Tom Rauch, 07:49
- [AMPS] Feedback path 3-500Z, Peter Chadwick, 07:47
- [AMPS] SB220, Phil Levin W2GE, 07:40
- [AMPS] Feedback path 3-500Z, i4jmy@iol.it, 07:24
- [AMPS] SB220, Bydal, 06:34
- [AMPS] Feedback path 3-500Z, Peter Chadwick, 03:42
- [AMPS] Feedback path 3-500Z, Peter Chadwick, 03:22
September 28, 2000
- [AMPS] Feedback path 3-500Z, measures, 23:00
- [AMPS] Feedback path 3-500Z, Tom Rauch, 19:33
- [AMPS] Feedback path 3-500Z, measures, 18:30
- [AMPS] Feedback path 3-500Z, Tom Rauch, 17:07
- [AMPS] another book you should have, John T. M. Lyles, 14:53
- [AMPS] S.S. Amps, dcckc, 14:06
- [AMPS] Feedback path 3-500Z, Maurizio Panicara, 14:04
- [AMPS] Feedback path 3-500Z, measures, 13:44
- [AMPS] SB-220 Smoke Test, measures, 13:44
- [AMPS] Feedback path 3-500Z, measures, 13:44
- [AMPS] SB-220 Smoke Test, measures, 13:44
- [AMPS] UltraRF, John T. M. Lyles, 12:28
- [AMPS] Feedback path 3-500Z, Peter Chadwick, 11:56
- [AMPS] Feedback path 3-500Z, i4jmy@iol.it, 11:48
- [AMPS] Feedback path 3-500Z, Peter Chadwick, 11:29
- [AMPS] Feedback path 3-500Z, Radio WC6W, 11:13
- [AMPS] New site; GU-35B tube, UT7CT ---> Anton Koval, 08:27
- [AMPS] Feedback path 3-500Z, Peter Chadwick, 08:07
- [AMPS] High Power on 70cm - Possible?, <AccessIT@Bigpond.net.au (Noel Willis @ Access IT), 07:46
- [AMPS] Feedback path 3-500Z, Tom Rauch, 07:44
- [AMPS] SB-220 Smoke Test, Tom Rauch, 07:05
- [AMPS] SB-220 Smoke Test, measures, 06:14
- [AMPS] SB-220 Smoke Test, Tom Rauch, 05:28
- [AMPS] SB-220 Smoke Test, measures, 05:24
- [AMPS] SB-220 Smoke Test, measures, 05:08
- [AMPS] SB-220 Smoke Test, i4jmy@iol.it, 04:54
- [AMPS] SB-220 Smoke Test, Peter Chadwick, 04:27
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 04:26
- [AMPS] Watt meters, Peter Chadwick, 03:45
- [AMPS] AL-80B Amps, Peter Chadwick, 03:39
- [AMPS] Watt meters, Jaime P.Ullívarri, 03:28
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 03:28
- [AMPS] AL-80B Amps, Ian Roberts, 02:52
- [AMPS] SB-220 Smoke Test, <g3sek@ifwtech.com (Ian White, G3SEK), 02:45
- [AMPS] V-I-R-U-S, Will, 00:23
- [AMPS] SB-220 Smoke Test, Mark S Graalman, 00:13
September 27, 2000
- [AMPS] AL-80B Amps, Steve, 21:40
- [AMPS] SB-220 Smoke Test, measures, 21:14
- [AMPS] SB-220 Smoke Test, measures, 21:14
- [AMPS] SB-220 Smoke Test, measures, 20:42
- [AMPS] SB-220 Smoke Test, measures, 20:42
- [AMPS] SB-220 Smoke Test, Tom Rauch, 19:35
- [AMPS] SB-220 Smoke Test, Maurizio Panicara, 17:54
- [AMPS] AL-80B Amps, measures, 17:24
- SV: [AMPS] Linearizing Linears, feedback or feedforward, measures, 17:24
- [AMPS] AL-80B, measures, 17:24
- [AMPS] SB-220 Smoke Test, Maurizio Panicara, 16:51
- [AMPS] AL-80B Amps+, N6BUU@aol.com, 16:48
- [AMPS] SB-220 Smoke Test, Mark S Graalman, 16:15
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Lamb, 15:01
- [AMPS] AL-80B, jeg, 14:40
- [AMPS] AL-80B Amps, Tom Rauch, 14:22
- [AMPS] Watt meters, Bruce R. Knox, 14:04
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Tom Rauch, 14:01
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Bob Duckworth, 13:48
- [AMPS] AL-80B, dcckc, 13:46
- [AMPS] SB-220 Smoke Test, measures, 13:35
- [AMPS] AL-80B, Edward Ewell, 13:35
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Colin Lamb, 13:34
- [AMPS] AL-80B, kl7ra, 13:21
- [AMPS] AL-80B Amps, Bill Turner, 13:13
- [AMPS] AL-80B Amps, Carl Smidt, 13:00
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Spencer Petri, 12:38
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Spencer Petri, 12:17
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Harry Brown, 11:58
- [AMPS] AL-80B Amps, N6BUU@aol.com, 11:55
- [AMPS] AL-80B Amps, Edward Ewell, 11:47
- [AMPS] AL-80B Amps, Harry Brown, 11:43
- [AMPS] 73's Technical Editor, Radio WC6W, 11:39
- [AMPS] AL-80B, Tarrant David, 11:16
- [AMPS] AL-80B Amps, Phil (VA3UX), 10:53
- [AMPS] SB-220 Smoke Test, <g3sek@ifwtech.com (Ian White, G3SEK), 10:48
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 10:08
- [AMPS] AL-80B Amps, measures, 09:44
- [AMPS] AL-80B Amps, Peter Chadwick, 09:01
- [AMPS] AL-80B Amps, Wt8r@aol.com, 08:52
- [AMPS] AL-80B Amps, Ian Roberts, 08:51
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 08:50
- [AMPS] AL-80B Amps, measures, 08:47
- SV: [AMPS] Linearizing Linears, feedback or feedforward, measures, 08:47
- [AMPS] SB-220 Smoke Test, measures, 08:47
- [AMPS] Watt meters, Jeff Wolf, 08:32
- [AMPS] AL-80B Amps, Tom Rauch, 08:16
- [AMPS] AL-80B Amps, Steve, 06:52
- [AMPS] AL-80B Amps, Tom Rauch, 06:41
- [AMPS] Drake L7: it WORKS :-)!, Peter Chadwick, 05:07
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 04:23
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 04:20
- [AMPS] SB-220 Smoke Test, i4jmy@iol.it, 03:18
- [AMPS] AL-80B Amps, Tarrant David, 02:14
September 26, 2000
- [AMPS] Watt meters, Paul Christensen, 22:35
- [AMPS] SB-220 Smoke Test, michael watts, 22:06
- [AMPS] Linearizing Linears, feedback or feedforward, jeff millar, 21:49
- [AMPS] Watt meters, Bill Turner, 21:30
- [AMPS] SB-220 Smoke Test, Tom Rauch, 19:46
- [AMPS] SB-220 Smoke Test, measures, 19:23
- [AMPS] SB-220 Smoke Test, A P, 19:15
- [AMPS] SB-220 Smoke Test, Tom Rauch, 18:54
- [AMPS] Siemens RS 1026 What is it??, Einar Persson, 18:46
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Lamb, 18:20
- [AMPS] SB-220 Smoke Test, Tim Duffy, 18:19
- [AMPS] SB-220 Smoke Test, A P, 17:46
- [AMPS] Watt meters, Pete Smith, 17:21
- [AMPS] Drake L7: it WORKS :-)!, JOSE V. GAVILA (EB5AGV/EC5AAU), 17:09
- [AMPS] Watt meters, measures, 17:03
- [AMPS] Watt meters, Jim Reid, 16:59
- [AMPS] Watt meters, Charles, 16:56
- [AMPS] Watt meters, Jim, 16:35
- [AMPS] Kaput 8877 #2, Lamb, 16:11
- [AMPS] Drake L7: another question, Lamb, 15:49
- SV: [AMPS] Linearizing Linears, feedback or feedforward, A P, 15:26
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Tom Rauch, 15:08
- [AMPS] Kaput 8877 #2, Bill Aycock, 14:35
- [AMPS] Siemens Power Tubes, John T. M. Lyles, 14:21
- SV: [AMPS] Linearizing Linears, feedback or feedforward, measures, 13:23
- [AMPS] Kaput 8877 #2, measures, 13:05
- SV: [AMPS] Linearizing Linears, feedback or feedforward, measures, 13:05
- SV: [AMPS] Linearizing Linears, feedback or feedforward, A P, 13:04
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Harry Brown, 13:04
- [AMPS] Kaput 8877 #2, measures, 12:54
- [AMPS] Kaput 8877 #2, measures, 12:54
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 12:20
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 12:08
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Tom Rauch, 11:59
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Tom Rauch, 11:59
- SV: [AMPS] Linearizing Linears, feedback or feedforward, measures, 11:56
- [AMPS] Kaput 8877 #2, measures, 11:56
- [AMPS] wanted SB 220 bandswitch, measures, 11:56
- SV: [AMPS] Linearizing Linears, feedback or feedforward, measures, 11:56
- [AMPS] Amp using 833A, measures, 11:56
- [AMPS] Book recommendation?, measures, 11:56
- [AMPS] wanted SB 220 bandswitch, measures, 11:56
- [AMPS] Kaput 8877 #2, Wt8r@aol.com, 11:53
- [AMPS] Kaput 8877 #2, Michael O. Hyder, 11:34
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Bill Turner, 11:08
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 11:02
- [AMPS] RE:30L1/30S1 tuning (was: linearizing linears), Peter Chadwick, 10:31
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 10:24
- [AMPS] RE:30L1/30S1 tuning (was: linearizing linears), Pete Smith, 10:22
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Tom Rauch, 10:10
- [AMPS] Book recommendation?, Peter Chadwick, 09:50
- [AMPS] Book recommendation?, Harry Brown, 09:46
- [AMPS] wanted SB 220 bandswitch, i4jmy@iol.it, 09:15
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 08:47
- [AMPS] New member and Drake L7 questions, Tom Rauch, 08:26
- [AMPS] wanted SB 220 bandswitch, Tom Rauch, 08:26
- SV: [AMPS] Linearizing Linears, feedback or feedforward, Tom Rauch, 08:26
- [AMPS] Kaput 8877 #2, Tom Rauch, 08:26
- [AMPS] AL800H, cqki8fh@juno.com, 07:49
- [AMPS] FS : GS35b, LY2MW, 07:47
- SV: [AMPS] Linearizing Linears, feedback or feedforward, <g3sek@ifwtech.com (Ian White, G3SEK), 06:16
- [AMPS] New member and Drake L7 questions, Peter Chadwick, 05:58
- [AMPS] Book recommendation?, Peter Chadwick, 05:53
- [AMPS] wanted SB 220 bandswitch, Peter Chadwick, 05:44
- [AMPS] Book recommendation?, JOSE V. GAVILA (EB5AGV/EC5AAU), 05:44
- [AMPS] wanted SB 220 bandswitch, Ian Roberts, 05:31
- [AMPS] Linearizing Linears, feedback or feedforward, Peter Chadwick, 05:22
- [AMPS] Amp using 833A, Peter Chadwick, 03:50
- [AMPS] Amp using 833A, Peter Chadwick, 03:43
- [AMPS] New member and Drake L7 questions, <g3sek@ifwtech.com (Ian White, G3SEK), 03:07
- SV: [AMPS] Linearizing Linears, feedback or feedforward, sm5ki, 02:55
- [AMPS] Kaput 8877 #2, measures, 02:51
- [AMPS] Linearizing Linears, feedback or feedforward, measures, 02:51
- [AMPS] Drake L7: another question, measures, 02:51
- [AMPS] Drake L7: another question, JOSE V. GAVILA (EB5AGV/EC5AAU), 01:41
September 25, 2000
- [AMPS] FS: Two Eimac 3-400Z tubes, Boyd, 23:46
- [AMPS] Linearizing Linears, feedback or feedforward, Tom Rauch, 23:17
- [AMPS] Amp using 833A, Tom Rauch, 19:18
- [AMPS] Diagram needed, measures, 17:39
- [AMPS] Drake L7: first check, measures, 17:21
- [AMPS] What's an MA1004?, Denis_Jackson@Mitel.COM, 15:23
- [AMPS] Drake L7: first check, Bill Turner, 14:21
- [AMPS] Amp using 833A, measures, 14:09
- [AMPS] Amp using 833A, William Fuqua, 13:50
- [AMPS] Drake L7: first check, JOSE V. GAVILA (EB5AGV/EC5AAU), 13:29
- [AMPS] Drake L7: first check, Chris Tran GM3WOJ, 12:55
- [AMPS] Siemens RS 1026 What is it??, Mike Baker, 12:07
- [AMPS] Amp using 833A, <g3sek@ifwtech.com (Ian White, G3SEK), 11:30
- [AMPS] Amp using 833A, Peter Chadwick, 11:09
- [AMPS] Amp using 833A, measures, 10:59
- [AMPS] Amp using 833A, measures, 10:59
- [AMPS] New member and Drake L7 questions, Peter Chadwick, 10:21
- [AMPS] wanted SB 220 bandswitch, Pete Smith, 09:41
- [AMPS] Amp using 833A, <g3sek@ifwtech.com (Ian White, G3SEK), 09:29
- [AMPS] New member and Drake L7 questions, <g3sek@ifwtech.com (Ian White, G3SEK), 09:25
- [AMPS] wanted SB 220 bandswitch, Peter Chadwick, 08:49
- [AMPS] Amp using 833A, Peter Chadwick, 08:30
- [AMPS] New member and Drake L7 questions, Phil Levin W2GE, 08:30
- [AMPS] Amp using 833A, measures, 08:25
- [AMPS] New member and Drake L7 questions, Peter Chadwick, 08:00
- [AMPS] New member and Drake L7 questions, measures, 07:59
- [AMPS] Amp using 833A, Peter Chadwick, 06:52
- [AMPS] New member and Drake L7 questions, JOSE V. GAVILA (EB5AGV/EC5AAU), 05:40
- [AMPS] panel meters, G SEVEN, 02:01
September 24, 2000
- [AMPS] RE: Graphite Anodes, measures, 22:50
- [Drake] Re: [AMPS] L7 Amp Questions, measures, 22:50
- Fwd: Re: [AMPS] RE: Graphite Anodes, Bill Fuqua, 20:46
- [AMPS] RE: Graphite Anodes, Tom Rauch, 18:31
- [AMPS] 4CX1600B, UT7CT ---> Anton Koval, 11:37
- [AMPS] RE: Graphite Anodes, Dave Bowker, 11:08
- [AMPS] 811A Biasing, <g3sek@ifwtech.com (Ian White, G3SEK), 05:37
September 23, 2000
- [AMPS] 811A Biasing, Tom Rauch, 20:47
- [AMPS] 811A Biasing, <W4EF@dellroy.com (Michael Tope), 19:19
- [AMPS] L7 Amp Questions, Tom Rauch, 19:00
- [AMPS] L7 Amp Questions, Tom Rauch, 19:00
- [AMPS] L7 Amp Questions, measures, 17:36
- [AMPS] graphite, John Lyles, 16:27
- [AMPS] L7 Amp Questions, Harry Brown, 15:36
- [AMPS] Diagram needed, Jerry Devine, 14:34
- [AMPS] Some hole punches we use ...K0FF, K0FF, 10:26
- [AMPS] Diagram needed, measures, 09:36
- [AMPS] GU-91B, UT7CT ---> Anton Koval, 03:12
- [AMPS] ncl 2000 primary wiring, kg7da, 02:36
September 22, 2000
- [AMPS] wanted SB 220 bandswitch, measures, 20:54
- [AMPS] wanted SB 220 bandswitch, D.Anderson, 19:15
- [AMPS] SELL: MLA2500 parts, w2cqm@juno.com, 16:33
- [AMPS] SELL: HV plate chokes, w2cqm@juno.com, 16:15
- [AMPS] SELL: 115VAC solid state delay timer, w2cqm@juno.com, 16:11
- [AMPS] WTB, Duds from 87, 86 and AL-1500. ., measures, 14:28
- FW: [AMPS] 3-500z repair question, measures, 09:55
- [AMPS] Graphite 3-500ZG, Bill Turner, 07:17
- FW: [AMPS] 3-500z repair question, Phil Levin W2GE, 06:42
- [AMPS] FS : GU36b tube - a real power device, Remigijus, 04:54
- [AMPS] wanted SB 220 bandswitch, measures, 04:44
- [AMPS] wanted SB 220 bandswitch, Ian Roberts, 02:18
September 21, 2000
- [AMPS] 3-500z repair question, measures, 23:34
- [AMPS] 3-500z repair question, Bill Vogler, 22:36
- [AMPS] Info needed 3cx350A, KB7WW Art Moe, 21:26
- [AMPS] BC610... no 833's, jeff millar, 20:33
- [AMPS] Follow-up on LK550 fan noise, Dick Green, 15:29
- [AMPS] Some tube questions...conversion to H2O cooling, Lamb, 13:56
- [AMPS] amperex, William Fuqua, 13:15
- [AMPS] Amperex and Penta Labs, <w6nq@rfparts.com (W6NQ), 12:01
- [AMPS] 8877 still in production?, Carsten Esch, 08:36
- [AMPS] Some tube questions...conversion to H2O cooling, Bill Turner, 08:27
- [AMPS] Some tube questions...conversion to H2O cooling, measures, 06:42
- [AMPS] Some tube questions...conversion to H2O cooling, measures, 06:42
- [AMPS] Some tube questions...conversion to H2O cooling, Lamb, 05:44
- [AMPS] Re: [Tube-Swap] Amperex and Penta Labs, Steve Thompson, 02:53
- [AMPS] Some tube questions...conversion to H2O cooling, Steve Thompson, 02:50
- [AMPS] BC610... no 833's, measures, 00:19
September 20, 2000
- [AMPS] Extending the Life of Power Grid Electron Tubes, RICHARD LANGEVIN, 23:39
- [AMPS] tube S 2002 Japanese, Joe Subich, W8IK, 21:08
- [AMPS] Amperex and Penta Labs, Tom Rauch, 19:41
- [AMPS] BC610... no 833's, measures, 19:18
- [AMPS] Some tube questions...conversion to H2O cooling, Steve Thompson, 18:56
- [AMPS] BC610... no 833's, K9MUF@aol.com, 18:23
- [AMPS] Amperex and Penta Labs, Mike Sawyer, 16:35
- [AMPS] Some tube questions...conversion to H2O cooling, Mike Sawyer, 16:34
- [AMPS] BC610... no 833's, Mike Sawyer, 16:32
- [AMPS] BC610... no 833's, Mike Sawyer, 16:28
- [AMPS] Re: [Tube-Swap] Amperex and Penta Labs, William Fuqua, 15:51
- [AMPS] vacuum variable capacitors, Radio WC6W, 15:34
- [AMPS] BC610... no 833's, Jim Reid, 14:31
- Fwd: Re: [AMPS] Some tube questions...conversion to H2O cooling, William Fuqua, 14:26
- [AMPS] Some tube questions...conversion to H2O cooling+, N6BUU@aol.com, 14:20
- [AMPS] Some tube questions...conversion to H2O cooling, measures, 13:35
- [AMPS] vacuum variable capacitors, rb, 13:32
- [AMPS] Amperex and Penta Labs, Gary, VE3SOU, 13:32
- [AMPS] BC610... no 833's+, N6BUU@aol.com, 13:15
- [AMPS] Some tube questions...conversion to H2O cooling, George T. Daughters, 12:41
- [AMPS] Amperex and Penta Labs, measures, 12:40
- [AMPS] Some tube questions...conversion to H2O cooling, measures, 12:40
- [AMPS] BC610... no 833's, K0FF, 12:25
- [AMPS] Some tube questions...conversion to H2O cooling, William Fuqua, 12:14
- [AMPS] BC610... no 833's, Tom Rauch, 10:30
- [AMPS] Amperex and Penta Labs, William Fuqua, 08:34
- [AMPS] BC610... no 833's, measures, 05:06
September 19, 2000
- [AMPS] "Care & Feeding of Power Grid Tubes", Pat Poirier, 23:17
- [AMPS] BC610... no 833's, Mike Sawyer, 22:51
- [AMPS] BC610... no 833's, Mike Sawyer, 22:44
- [AMPS] Amp using 833A, jeff millar, 22:09
- [AMPS] OT: Yet strangely relevant......., Phil Levin W2GE, 20:27
- [AMPS] Amp using 833A, jeff millar, 20:14
- [AMPS] Some tube questions...conversion to H2O cooling, measures, 18:58
- [AMPS] Amp using 833A, measures, 18:36
- [AMPS] Amp using 833A, measures, 18:36
- [AMPS] Amp using 833A, measures, 18:36
- [AMPS] amp factor, measures, 18:36
- [AMPS] "Care & Feeding of Power Grid Tubes", Jeff Weinberg W8CQ, 17:13
- [AMPS] "Care & Feeding of Power Grid Tubes", Chuck Counselman, 17:01
- [AMPS] amp factor, Radio WC6W, 16:46
- [AMPS] Amp using 833A, Mike Sawyer, 16:15
- [AMPS] Amp using 833A, Mike Sawyer, 16:14
- [AMPS] amp factor, Ken Barber, 15:44
- [AMPS] need data pl-264/8576, kg7da, 14:42
- [AMPS] Some tube questions...conversion to H2O cooling, Bob Duckworth, 13:22
- [AMPS] 833's - go for the gusto, Colin Lamb, 13:15
- [AMPS] Amp using 833A, Tom Rauch, 12:24
- [AMPS] BC610... no 833's, Tom Rauch, 12:24
- [AMPS] Amp using 833A, Peter Chadwick, 12:03
- [AMPS] BC610... no 833's, measures, 11:57
- [AMPS] BC610... no 833's, Peter Chadwick, 11:48
- [AMPS] BC610... no 833's, George T. Daughters, 11:46
- [AMPS] Amp using 833A, measures, 11:34
- [AMPS] Amp using 833A, measures, 11:26
- [AMPS] Unnecessary Quoting, measures, 11:26
- [AMPS] Amp using 833A, measures, 11:26
- [AMPS] Amp using 833A, measures, 11:26
- [AMPS] Amp using 833A, measures, 11:26
- [AMPS] Amp using 833A, measures, 11:26
- [AMPS] 833, John T. M. Lyles, 11:22
- [AMPS] Amp using 833A, Radio WC6W, 10:55
- [AMPS] Amp using 833A, Peter Chadwick, 10:24
- [AMPS] Amp using 833A, Tom Rauch, 10:11
- [AMPS] Unnecessary Quoting, Carl Smidt, 09:40
- [AMPS] Unnecessary Quoting, Michael O. Hyder, 09:22
- [AMPS] Amp using 833A, William Fuqua, 08:24
- [AMPS] Amp using 833A, Peter Chadwick, 05:13
- [AMPS] Amp using 833A, Tom Rauch, 05:01
- [AMPS] Amp using 833A, Peter Chadwick, 04:59
- [AMPS] Amp using 833A, Tom Rauch, 04:52
- [AMPS] Amp using 833A, Peter Chadwick, 04:32
- [AMPS] SVETLANA & NOVOSIBIRSK TUBES, UT7CT ---> Anton Koval, 04:23
- [AMPS] Amp using 833A, Bob Duckworth, 03:04
September 18, 2000
- [AMPS] Amp using 833A, Phil (VA3UX), 22:21
- [AMPS] Amp using 833A, measures, 22:04
- [AMPS] Amp using 833A, measures, 22:04
- [AMPS] Amp using 833A, measures, 22:04
- [AMPS] 3-500z repair question, measures, 21:44
- [AMPS] Amp using 833A, measures, 21:44
- [AMPS] Amp using 833A, Phil (VA3UX), 21:22
- [AMPS] Amp using 833A, Tom Rauch, 21:10
- [AMPS] Amp using 833A, Phil (VA3UX), 21:09
- [AMPS] paint touch up for Ameritron Amps?, Kelly Ellison, 20:23
- [AMPS] 3-500z repair question, Bill Vogler, 16:07
- [AMPS] Hipot tests+, N6BUU@aol.com, 12:20
- [AMPS] Mount pi-net capacitors vertically, Peter Chadwick, 08:50
- [AMPS] Mount pi-net capacitors vertically, Tom Rauch, 08:44
- [AMPS] Mount pi-net capacitors vertically, Peter Chadwick, 05:38
- [AMPS] Hipot tests, Mark S Graalman, 05:11
- [AMPS] Hipot tests, Steve Thompson, 02:44
- [AMPS] Amp using 833A, Radio WC6W, 01:15
- [AMPS] Source for 811 tubes, G SEVEN, 00:38
September 17, 2000
- [AMPS] Amp using 833A Or My L Amps bigger than yours..K0FF, Larry L. Ravlin, 23:50
- [AMPS] Amp using 833A Or My L Amps bigger than yours..K0FF, K0FF, 23:15
- [AMPS] Amp using 833A, Phil (VA3UX), 22:43
- [AMPS] Amp using 833A, Mike Sawyer, 22:35
- [AMPS] Amp using 833A, measures, 22:25
- [AMPS] Amp using 833A, Mark S Graalman, 21:41
- [AMPS] Amp using 833A, Phil (VA3UX), 21:24
- [AMPS] Source for 811 tubes, Charles, 20:53
- [AMPS] Source for 811 tubes, <W4EF@dellroy.com (Michael Tope), 20:21
- [AMPS] WTB kaput 8877 from AL-1500., measures, 20:16
- [AMPS] Need Gates amp info, Alan Gray, 19:35
- [AMPS] Hipot tests, measures, 19:10
- [AMPS] WTB kaput 8877 from AL-1500., Pat Poirier, 18:56
- [AMPS] Need Gates amp info, Ken Barber, 18:32
- [AMPS] MLA-2500/4cx400a tube conversion, Tom Hix W4TH, 14:57
- [AMPS] Hipot tests, Steve Thompson, 13:59
- [AMPS] Alpha 77, dudley, 11:36
- [AMPS] Hipot tests, measures, 08:16
- [AMPS] Hipot tests, Steve Thompson, 03:11
- [AMPS] All Mode KW Transmitter firmware, Steve Thompson, 02:37
- [AMPS] Fw: censorship, bad news time, Steve Thompson, 02:24
September 16, 2000
- [AMPS] TS-940S/AT Spur resolution, Gary McAdams, 22:41
- [AMPS] WTB kaput 8877 from AL-1500., measures, 22:36
- [AMPS] Amp using 833A Or My L Amps bigger than yours..K0FF, Lane Zeitler, 22:25
- [AMPS] SELL: 8877 chimneys+, w2cqm@juno.com, 14:58
- [AMPS] 4CX5000 Filament Voltage/Current?, Phil Clements, 14:55
- [AMPS] 4CX5000 Filament Voltage/Current?, Wt8r@aol.com, 14:22
- [AMPS] All Mode KW Transmitter firmware, jeff millar, 13:55
- [AMPS] 4CX5000 Filament Voltage/Current?, Jack Harper, 13:52
- [AMPS] shortwave Tx, Maurizio Panicara, 13:24
- [AMPS] All Mode KW Transmitter firmware, Radio WC6W, 10:17
- [AMPS] Unnecessary Quoting, Paul Ferguson, 08:39
- [AMPS] Fw: censorship, bad news time, measures, 04:46
- [AMPS] Fw: censorship, bad news time, Dave, AA6YQ, 02:54
- [AMPS] open to list owner, measures, 02:10
- [AMPS] Fw: censorship, bad news time, measures, 02:10
- [AMPS] open to list owner, Gary, VE3SOU, 02:00
- [AMPS] shortwave Tx, Chris Tran GM3WOJ, 01:47
- [AMPS] Mount pi-net capacitors vertically, jeff millar, 00:32
September 15, 2000
- [AMPS] 15 kV modules all gone. K0FF, K0FF, 22:47
- [AMPS] Fw: censorship, bad news time, Bill Aycock, 21:10
- [AMPS] All Mode KW Transmitter firmware, Mike Sawyer, 20:30
- [AMPS] open to list owner, Phil (VA3UX), 20:25
- [AMPS] Fw: censorship, bad news time, Will, 20:15
- [AMPS] Fw: censorship, bad news time, nospam4me@juno.com, 20:01
- [AMPS] shortwave Tx, Bill Turner, 18:36
- [AMPS] open to list owner, Larry Botkin, 18:34
- [AMPS] TS-940S/AT Spur resolution, Gary McAdams, 18:08
- [AMPS] open to list owner, N6BUU@aol.com, 17:45
- [AMPS] open to list owner, dcckc, 17:32
- [AMPS] open to list owner, Jim Reid, 17:27
- [AMPS] open to list owner, Charles, 17:19
- [AMPS] open to list owner, Bill Aycock, 17:04
- [AMPS] shortwave Tx, John T. M. Lyles, 16:27
- [AMPS] Amp Pi Network Behavior, Chuck Counselman, 14:11
- [AMPS] All Mode KW Transmitter firmware, Carsten Groen, 13:18
- [AMPS] Mount pi-net capacitors vertically, measures, 13:12
- [AMPS] All Mode KW Transmitter firmware, Bill Turner, 13:08
- [AMPS] Great debate, measures, 13:05
- [AMPS] Mount pi-net capacitors vertically, measures, 13:05
- [AMPS] Great debate, measures, 13:04
- [AMPS] Vacuum variable repair? Possible?, Mark Trotman, 12:28
- [AMPS] All Mode KW Transmitter firmware, Radio WC6W, 12:26
- [AMPS] Drake L-4B Front Panel, Jeff Weinberg W8CQ, 12:05
- [AMPS] All Mode KW Transmitter firmware, Warren J. Walsh, 12:05
- [AMPS] All Mode KW Transmitter firmware, Radio WC6W, 11:55
- [AMPS] Mount pi-net capacitors vertically, Tom Rauch, 11:48
- [AMPS] Mount pi-net capacitors vertically, Radio WC6W, 10:27
- [AMPS] Mount pi-net capacitors vertically, Radio WC6W, 10:27
- [AMPS] Mount pi-net capacitors vertically, Jeff Wolf, 10:21
- [AMPS] Amp Pi Network Behavior, Tom Rauch, 09:57
- [AMPS] Mount pi-net capacitors vertically, i4jmy@iol.it, 09:47
- [AMPS] Amp Pi Network Behavior, Pete Smith, 09:44
- [AMPS] Mount pi-net capacitors vertically, K0FF, 09:26
- [AMPS] tube S 2002 Japanese, Uwe Egen, 09:17
- [AMPS] Great debate, Bill Turner, 09:16
- [AMPS] Great debate, Will, 08:08
- [AMPS] Mount pi-net capacitors vertically, Tom Rauch, 06:45
- [AMPS] 8877 test results.??, measures, 05:06
- [AMPS] Great debate, measures, 05:06
- [AMPS] 8877 test results.??, Steve Thompson, 02:28
- [AMPS] Great debate, Steve Thompson, 02:18
- [AMPS] Mount pi-net capacitors vertically, measures, 01:04
- [AMPS] 8877 test results., Jim Reid, 00:59
- [AMPS] Duplicat(almost) posts 8877 test results., Jim Reid, 00:55
- [AMPS] Hi-Pot Testing 8877, measures, 00:44
- [AMPS] did someone say Tesla?, Conrad Farlow, 00:25
- [AMPS] 8877 test results., Jim Reid, 00:22
- [AMPS] Hi-Pot Testing 8877, dan hearn, 00:21
September 14, 2000
- [AMPS] Rf models, Dave, AA6YQ, 23:53
- [AMPS] 8877 test results., Dave, AA6YQ, 23:28
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 23:15
- [AMPS] Shorted Pi-Networks Turns revisited, jeff millar, 22:59
- [AMPS] 8877 test results.??, measures, 22:23
- [AMPS] did someone say Tesla?, Mike Sawyer, 22:20
- [AMPS] did someone say Tesla?, michael watts, 21:41
- [AMPS] Rf models, John T. M. Lyles, 21:36
- [AMPS] did someone say Tesla?, Bill Turner, 21:33
- [AMPS] 8877 test results., Jim Reid, 21:15
- [AMPS] did someone say Tesla?, John T. M. Lyles, 21:08
- [AMPS] 8877 test results.??, Bill Aycock, 21:07
- [AMPS] 8877 test results., measures, 20:04
- [AMPS] 8877 test results., measures, 20:04
- [AMPS] 8877 test results., Bill Turner, 19:56
- [AMPS] 8877 test results., Tom Rauch, 19:07
- [AMPS] 8877 test results., Dave, AA6YQ, 19:07
- [AMPS] 8877 test results., Michael O. Hyder, 18:41
- [AMPS] 8877 test results., measures, 18:34
- [AMPS] Kaput 8877s from AL-1500 arrive, measures, 17:16
- [AMPS] Back home, UT7CT ---> Anton Koval, 16:59
- [AMPS] Interesting projects -- All Mode KW Transmitter, Tom Rauch, 11:40
- [AMPS] 8877's, Tom Rauch, 11:35
- [AMPS] Blown TL922A... What to do?, measures, 11:31
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 11:29
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 11:04
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 11:04
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 11:04
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 11:04
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 11:04
- [AMPS] Blown TL922A... What to do?, Phil Clements, 10:39
- [AMPS] Interesting projects -- All Mode KW Transmitter, Tom Rauch, 10:22
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 10:17
- [AMPS] Interesting projects -- All Mode KW Transmitter, William Fuqua, 09:48
- [AMPS] Interesting projects -- All Mode KW Transmitter, Bruce R. Knox, 09:34
- [AMPS] Blown TL922A... What to do?, measures, 09:25
- [AMPS] Blown TL922A... What to do?, measures, 09:21
- [AMPS] Blown TL922A... What to do?, measures, 09:21
- [AMPS] Blown TL922A... What to do?, measures, 09:21
- [AMPS] Logic v. Magic, measures, 09:21
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 08:03
- [AMPS] Blown TL922A... What to do?, Phil Clements, 06:57
- [AMPS] Blown TL922A... What to do?, Phil Clements, 06:47
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 05:57
- [AMPS] All Mode KW Transmitter firmware, nospam4me@juno.com, 03:24
- [AMPS] Blown TL922A... What to do?, measures, 03:03
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 02:32
- [AMPS] Logic v. Magic, <g3sek@ifwtech.com (Ian White, G3SEK), 02:21
- [AMPS] Interesting projects -- All Mode KW Transmitter, dcckc, 01:50
- [AMPS] Modelling and its failures, Fred Fliss, 01:45
- [AMPS] Blown TL922A... What to do?, measures, 01:07
- [AMPS] Interesting projects -- All Mode KW Transmitter, michael watts, 00:44
- [AMPS] Blown TL922A... What to do?, Phil Clements, 00:42
- [AMPS] New Pix, michael watts, 00:06
September 13, 2000
- [AMPS] Fair is not fair, measures, 23:56
- [AMPS] Dentron DTR-2000, Mike Krzystyniak, 23:43
- [AMPS] New Pix, Phillip Johnson, 23:38
- [AMPS] Re: K0FF, Radio WC6W, 23:30
- [AMPS] Interesting projects -- All Mode KW Transmitter, Radio WC6W, 23:30
- [AMPS] New Pix, Puma, 23:25
- [AMPS] Fair is not fair, Phil (VA3UX), 23:24
- [AMPS] From: "Joao Lopes" <cunhalopes@mail.telepac.pt>, measures, 23:24
- [AMPS] New Pix, michael watts, 23:23
- [AMPS] Fair is fair, measures, 23:13
- [AMPS] Blown TL922A... What to do?, measures, 23:13
- [AMPS] The Measures letter, measures, 23:12
- [AMPS] From: "Joao Lopes" <cunhalopes@mail.telepac.pt>, Will, 23:00
- [AMPS] Alpha 87A, Nancy & Steve Lawrence, 22:53
- [AMPS] New Pix, Larry Molitor, 22:35
- [AMPS] FCC Part 97.317, Jim Stutzman, 22:24
- [AMPS] Re: SELL: Mint Drake TR7 Tech/Service Manual, Ronald Lumachi, 22:19
- [AMPS] Blown TL922A... What to do?, Dave, AA6YQ, 21:18
- [AMPS] Fair is fair, Tom Rauch, 21:17
- [AMPS] Modelling and its failures, Tom Rauch, 21:17
- [AMPS] Shorted Pi-Networks Turns revisited, Tom Rauch, 20:51
- [AMPS] Blown TL922A... What to do?, Mike Sawyer, 20:30
- [AMPS] Blown TL922A... What to do?, Mike Sawyer, 20:28
- [AMPS] Blown TL922A... What to do?, Mike Sawyer, 20:25
- [AMPS] Modelling and its failures, Dave, AA6YQ, 20:19
- [AMPS] Blown TL922A... What to do?, Mike Sawyer, 20:05
- [AMPS] Fair is fair, measures, 19:39
- [AMPS] The Measures letter, Tom Rauch, 19:33
- [AMPS] Fair is fair, Tom Rauch, 19:33
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 19:33
- [AMPS] Blown TL922A... What to do?, measures, 19:27
- [AMPS] Blown TL922A... What to do?, Bill Putney, 19:24
- [AMPS] Shorted Pi-Networks Turns revisited, Mark S Graalman, 19:24
- [AMPS] Logic v. Magic, measures, 19:22
- [AMPS] Blown TL922A... What to do?, measures, 19:22
- [AMPS] Blown TL922A... What to do?, measures, 19:22
- [AMPS] Blown TL922A... What to do?, measures, 19:22
- [AMPS] Shorted Pi-Networks Turns revisited, measures, 19:22
- [AMPS] 8877 test results., measures, 19:22
- [AMPS] Blown TL922A... What to do?, measures, 19:22
- [AMPS] Blown TL922A... What to do?, Phil (VA3UX), 19:20
- [AMPS] Fair is fair, Phil (VA3UX), 19:12
- [AMPS] Blown TL922A... What to do?, Phil (VA3UX), 19:02
- [AMPS] Shorted Pi-Networks Turns revisited, Mark S Graalman, 18:16
- [AMPS] Get back to talking about projects re: K0FF, michael watts, 18:00
- [AMPS] Shorted Pi-Networks Turns revisited, YZ6X Sasha Kraljevich, 17:52
- [AMPS] Blown TL922A... What to do?, michael watts, 17:50
- [AMPS] Blown TL922A... What to do?, michael watts, 17:47
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 17:37
- [AMPS] Logic v. Magic, Steve Thompson, 17:34
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 17:32
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 17:27
- [AMPS] Finally a neat project! de K0FF, Steve Thompson, 17:24
- [AMPS] Shorted Pi-Networks Turns revisited, Phil Clements, 17:18
- [AMPS] 8877 test results., Chuck Counselman, 16:55
- [AMPS] 8877 test results., measures, 16:43
- [AMPS] Blown TL922A... What to do?, measures, 16:43
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 16:34
- [AMPS] Blown TL922A... What to do?, measures, 16:27
- [AMPS] Fair is fair, measures, 16:27
- [AMPS] Shorted Pi-Networks Turns revisited, measures, 16:27
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 15:54
- [AMPS] 8877 test results., Chuck Counselman, 15:30
- [AMPS] Blown TL922A... What to do?, Jim Reid, 15:26
- [AMPS] 8877 test results., measures, 14:28
- [AMPS] Blown TL922A... What to do?, measures, 14:28
- [AMPS] FCC Part 97.317, Mike Gilmer - N2MG, 14:22
- [AMPS] FCC Part 97.317, Scott Hotchkiss, 14:07
- [AMPS] Fair is fair, Tom Rauch, 13:28
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 13:28
- [AMPS] Finally a neat project! de K0FF, K0FF, 13:00
- [AMPS] FCC Part 97.317, Mike Gilmer - N2MG, 12:48
- [AMPS] Shorted Pi-Networks Turns revisited, Mike Gilmer - N2MG, 12:38
- [AMPS] FCC Part 97.317, alsopb, 12:26
- [AMPS] FCC Part 97.317, w2fca@qsl.net, 12:22
- [AMPS] FCC Part 97.317, Radio WC6W, 12:21
- [AMPS] Shorted Pi-Networks Turns revisited, Tom Rauch, 12:11
- [AMPS] Shorted Pi-Networks Turns revisited, measures, 12:11
- [AMPS] FCC Part 97.317, measures, 12:11
- [AMPS] Blown TL922A... What to do?, measures, 12:01
- [AMPS] Blown TL922A... What to do?, measures, 12:01
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 12:00
- [AMPS] Fair is fair, Wt8r@aol.com, 11:45
- [AMPS] Shorted Pi-Networks Turns revisited, Lamb, 11:42
- [AMPS] FCC Part 97.317, Mike Gilmer - N2MG, 11:39
- [AMPS] Shorted Pi-Networks Turns revisited, i4jmy@iol.it, 11:07
- [AMPS] Blown TL922A... What to do?, measures, 10:51
- [AMPS] A good example, measures, 10:51
- [AMPS] Blown TL922A... What to do?, measures, 10:51
- [AMPS] Kaput 8877s from AL-1500 arrive, measures, 10:51
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 10:44
- [AMPS] Shorted Pi-Networks Turns revisited, Tom Rauch, 10:30
- [AMPS] Blown TL922A... What to do?, Phil Clements, 10:25
- [AMPS] Kaput 8877s from AL-1500 arrive, Paul Christensen, 09:41
- [AMPS] Modelling and its failures, Tom Rauch, 09:40
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 09:40
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 09:40
- [AMPS] A good example, Tom Rauch, 09:40
- [AMPS] Kaput 8877s from AL-1500 arrive, measures, 09:39
- [AMPS] Blown TL922A... What to do?, measures, 09:38
- [AMPS] Logic v. Magic, measures, 09:38
- [AMPS] Shorted Pi-Networks Turns revisited, measures, 09:38
- [AMPS] Shorted Pi-Networks Turns revisited, YZ6X Sasha Kraljevich, 07:54
- [AMPS] Logic v. Magic, Steve Thompson, 02:52
- [AMPS] quick thanks, temp resistors., nospam4me@juno.com, 02:44
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 02:43
- [AMPS] Modelling and its failures, Fred Fliss, 02:09
- [AMPS] Blown TL922A... What to do?, measures, 01:42
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 00:57
- [AMPS] Properties of Different Metals, Bob & Linda McGraw K4TAX, 00:49
- [AMPS] Blown TL922A... What to do?, Jim Reid, 00:29
September 12, 2000
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 23:20
- [AMPS] Blown TL922A... What to do?, measures, 22:59
- [AMPS] Fair is fair, measures, 21:56
- [AMPS] Blown TL922A... What to do?, Dave, AA6YQ, 21:35
- [AMPS] Blown TL922A... What to do?, measures, 21:34
- [AMPS] Blown TL922A... What to do?, Bill Fuqua, 21:07
- [AMPS] Q is meaningless, measures, 20:32
- [AMPS] Grid protection, measures, 20:32
- [AMPS] 4CS250B, Jeff Wolf, 20:01
- [AMPS] Blown TL922A... What to do?, Dave, AA6YQ, 19:45
- [AMPS] temperature variable, varistor or globar resistor source wanted, Steve Thompson, 19:30
- [AMPS] Logic v. Magic, Steve Thompson, 19:29
- [AMPS] Grid protection, Tom Rauch, 18:39
- [AMPS] Fair is fair, Tom Rauch, 18:39
- [AMPS] Q is meaningless, Tom Rauch, 18:39
- [AMPS] failure modes in large tetrodes, measures, 17:50
- [AMPS] Quote, Larry Botkin, 16:50
- [AMPS] failure modes in large tetrodes, John T. M. Lyles, 16:27
- [AMPS] Electrolytics - info needed pse, <g3sek@ifwtech.com (Ian White, G3SEK), 16:14
- [AMPS] Quote, Kenneth C. Falk, CCIM, 15:57
- [AMPS] Grid protection, measures, 15:24
- [AMPS] Fair is fair, measures, 15:24
- [AMPS] Logic v. Magic, measures, 15:24
- [AMPS] Re: Big Mutha Soldering Iron, Pete Smith, 14:53
- [AMPS] Grid protection, measures, 14:14
- [AMPS] Blown TL922A... What to do?, measures, 14:14
- [AMPS] Blown TL922A... What to do?, measures, 14:14
- [AMPS] Logic v. Magic, measures, 14:14
- [AMPS] Blown TL922A... What to do?, measures, 14:14
- [AMPS] Logic v. Magic, measures, 14:14
- [AMPS] Fair is fair, Wt8r@aol.com, 13:58
- [AMPS] QRO Amps, kl7ra, 13:29
- [AMPS] QRO Amps, kl7ra, 13:00
- [AMPS] Fair is fair, Tom Rauch, 12:34
- [AMPS] Grid protection, Wt8r@aol.com, 11:52
- [AMPS] Audio Connectors, Colin Lamb, 11:49
- [AMPS] TS-940S/AT Spurs?, i4jmy@iol.it, 11:42
- [AMPS] Re: Big Mutha Soldering Iron, alsopb, 11:12
- [AMPS] TS-940S/AT Spurs?, Tom Rauch, 11:10
- [AMPS] Current limiting, BE CAREFUL!, Tom Rauch, 11:10
- [AMPS] temperature variable, varistor or globar resistor source wanted, Tom Rauch, 10:52
- [AMPS] EVALUATION OF HENRY 2K CLASSIC [2], Tom Rauch, 10:52
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 10:52
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 10:52
- [AMPS] Grid protection, Tom Rauch, 10:52
- [AMPS] Re: Big Mutha Soldering Iron, Phil Levin W2GE, 10:05
- [AMPS] temperature variable, varistor or globar resistor source wanted, Lamb, 09:50
- [AMPS] TS-940S/AT Spurs?, Gary McAdams, 09:37
- [AMPS] Logic v. Magic, <g3sek@ifwtech.com (Ian White, G3SEK), 09:07
- [AMPS] Question about Jennings UCS-500-10S, Bob Duckworth, 08:57
- [AMPS] Properties of Different Metals, <g3sek@ifwtech.com (Ian White, G3SEK), 08:10
- [AMPS] temperature variable, varistor or globar resistor source wanted, stephen hall, 08:09
- [AMPS] schematic with GU84b?, Remigijus, 08:08
- [AMPS] From Ron, K5BDJ rbigg@pcola.gulf.net, Will, 08:01
- [AMPS] Logic v. Magic, Peter Chadwick, 06:22
- [AMPS] Properties of Different Metals, Peter Chadwick, 06:01
- [AMPS] Properties of Different Metals, dcckc, 05:46
- [AMPS] Properties of Different Metals, Peter Chadwick, 05:19
- [AMPS] Electrolytics - info needed pse, <g3sek@ifwtech.com (Ian White, G3SEK), 05:16
- [AMPS] Blown TL922A... What to do?, i4jmy@iol.it, 04:50
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 03:49
- [AMPS] SELL:8877 RF Deck Components, Peter Chadwick, 02:55
- [AMPS] Blown TL922A... What to do?, Phil Clements, 02:40
- [AMPS] test, rb, 02:31
- [AMPS] Logic v. Magic, Peter Chadwick, 02:05
- [AMPS] temperature variable, varistor or globar resistor source wanted, nospam4me@juno.com, 02:03
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 02:00
- [AMPS] Voltage at antenna end. de K0FF, Bob & Linda McGraw K4TAX, 01:40
- [AMPS] EVALUATION OF HENRY 2K CLASSIC [2], Bob & Linda McGraw K4TAX, 01:39
- [AMPS] Blown TL922A... What to do?, measures, 01:34
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 00:51
- [AMPS] High Voltage at Antenna Ends, Bob & Linda McGraw K4TAX, 00:50
September 11, 2000
- [AMPS] Blown TL922A... What to do?, measures, 21:31
- [AMPS] Voltage at antenna end. de K0FF, Frank Ayers, 21:11
- [AMPS] EVALUATION OF HENRY 2K CLASSIC [2], measures, 21:11
- [AMPS] Blown TL922A... What to do?, Dave, AA6YQ, 20:59
- [AMPS] EVALUATION OF HENRY 2K CLASSIC [2], Jim Reid, 20:51
- [AMPS] High Voltage at Antenna Ends, Mike Sawyer, 20:32
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 20:12
- [AMPS] LK-500ZA Question, Mike Sawyer, 19:49
- [AMPS] EVALUATION OF HENRY 2K CLASSIC, measures, 19:40
- [AMPS] Blown TL922A... What to do?, measures, 19:40
- [AMPS] EVALUATION OF HENRY 2K CLASSIC [2], Chuck Counselman, 19:29
- [AMPS] EVALUATION OF HENRY 2K CLASSIC, Chuck Counselman, 19:21
- [AMPS] EVALUATION OF HENRY 2K CLASSIC, Colin Lamb, 18:19
- [AMPS] ISP problems, UT7CT---> Anton Koval, 17:51
- [AMPS] Voltage at antenna end. de K0FF, Tom Rauch, 17:47
- [AMPS] High Voltage at Antenna Ends, Chuck Counselman, 17:40
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 16:49
- [AMPS] High Voltage at Antenna Ends, measures, 16:27
- [AMPS] Voltage at antenna end., Chuck Counselman, 16:19
- [AMPS] Blown TL922A... What to do?, measures, 16:19
- [AMPS] High Voltage at Antenna Ends, Chuck Counselman, 16:04
- [AMPS] Voltage at antenna end. de K0FF, Jeff Wolf, 14:56
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 14:43
- [AMPS] Blown TL922A... What to do?, measures, 14:37
- [AMPS] Blown TL922A... What to do?, measures, 14:37
- [AMPS] Blown TL922A... What to do?, NICK WALLACE, 14:30
- [AMPS] Voltage at antenna end. de K0FF, K0FF, 14:27
- [AMPS] Voltage at antenna end. de K0FF, Chuck Counselman, 14:08
- [AMPS] Blown TL922A... What to do?, measures, 13:58
- [AMPS] Blown TL922A... What to do?, measures, 13:58
- [AMPS] Voltage at antenna end. de K0FF, w2fca@qsl.net, 13:36
- [AMPS] Voltage at antenna end. de K0FF, w2fca@qsl.net, 13:35
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 13:11
- [AMPS] Voltage at antenna end. de K0FF, Tom Rauch, 13:11
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 13:11
- [AMPS] TL922 UK version query, Mark Trotman, 12:42
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 12:25
- [AMPS] QRO Amps, Jim, 12:20
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 12:19
- [AMPS] High Voltage at Antenna Ends, Colin Lamb, 12:18
- [AMPS] Shorted Pi-Network Turns, Phil Clements, 12:08
- [AMPS] Blown TL922A... What to do?, measures, 11:26
- [AMPS] Possible project?, Anders Karlsson, 11:25
- [AMPS] Big Amps and Antennas, measures, 11:18
- [AMPS] Voltage at antenna end. de K0FF, measures, 11:18
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 11:03
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 10:59
- [AMPS] Blown TL922A... What to do?, measures, 10:49
- [AMPS] Blown TL922A... What to do?, measures, 10:49
- [AMPS] Voltage at antenna end. de K0FF, K0FF, 10:33
- [AMPS] Blown TL922A... What to do?, Bob & Linda McGraw K4TAX, 10:06
- [AMPS] Parasitic Oscillation Repeatability, measures, 09:19
- [AMPS] Big Amps and Antennas, Bruce Plantin, 09:01
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 09:01
- [AMPS] original design, Tom Rauch, 08:58
- [AMPS] Alpha, Tom Rauch, 08:58
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 08:58
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 08:58
- [AMPS] Parasitic Oscillation Repeatability, Tom Rauch, 08:58
- [AMPS] original design, measures, 08:31
- [AMPS] Ice water, measures, 08:31
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 07:57
- [AMPS] original design, dcckc, 04:03
- [AMPS] Alpha, Pete Smith, 03:24
- [AMPS] Blown TL922A... What to do?, jeff millar, 01:22
- [AMPS] Blown TL922A... What to do?, w7ry, 00:53
- [AMPS] Blown TL922A... What to do?, Jim Reid, 00:48
- [AMPS] LK-500ZA Question, Bob & Linda McGraw K4TAX, 00:48
- [AMPS] Alpha, Jim Reid, 00:34
- [AMPS] Alpha, Bob & Linda McGraw K4TAX, 00:29
- [AMPS] Blown TL922A... What to do?, Dave, AA6YQ, 00:21
- [AMPS] Ice water, dcckc, 00:08
- Fw: [AMPS] Amp Explosions, Bob & Linda McGraw K4TAX, 00:07
- [AMPS] Apology to Rich (Ice Water), Phil (VA3UX), 00:05
September 10, 2000
- [AMPS] Ice water, dcckc, 23:52
- [AMPS] Ice water, Phil (VA3UX), 23:39
- [AMPS] Blown TL922A... What to do?, Bob & Linda McGraw K4TAX, 23:33
- [AMPS] Blown TL922A... What to do?, measures, 23:32
- [AMPS] Blown TL922A... What to do?, measures, 23:32
- [AMPS] Blown TL922A... What to do?, measures, 23:32
- [AMPS] Alpha, Michael O. Hyder, 23:29
- [AMPS] Parasitic Oscillation Repeatability, Wt8r@aol.com, 23:25
- [AMPS] Parasitic Oscillation Repeatability, Lamb, 21:36
- [AMPS] Shorted Pi-Network Turns, Lamb, 20:58
- [AMPS] Shorted Pi-Network Turns, Tom Rauch, 20:17
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 20:17
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 20:17
- [AMPS] Blown TL922A... What to do?, Steve, 20:15
- [AMPS] LK-500ZA Question, measures, 20:00
- [AMPS] Shorted Pi-Network Turns, measures, 20:00
- [AMPS] Blown TL922A... What to do?, measures, 20:00
- [AMPS] Gas turbines, Phil (VA3UX), 18:59
- [AMPS] LK500ZA solved., Mark S Graalman, 18:04
- [AMPS] Blown TL922A... What to do?, Dave, AA6YQ, 17:49
- [AMPS] Shorted Pi-Network Turns, Phil Clements, 17:23
- [AMPS] LK-500ZA Question, Mark S Graalman, 16:47
- [AMPS] Blown TL922A... What to do?, measures, 16:00
- [AMPS] Shorted Pi-Network Turns, measures, 15:43
- [AMPS] Blown TL922A... What to do?, measures, 15:43
- [AMPS] Blown TL922A... What to do?, Dave, AA6YQ, 15:18
- [AMPS] Shorted Pi-Network Turns, Tom Rauch, 14:56
- [AMPS] Alphas, measures, 14:41
- [AMPS] Shorted Pi-Network Turns, measures, 14:41
- [AMPS] Blown TL922A... What to do?, N6BUU@aol.com, 14:36
- [AMPS] Shorted Pi-Network Turns, Phil Clements, 14:19
- [AMPS] Alphas, measures, 13:52
- [AMPS] Blown TL922A... What to do?, measures, 13:52
- [AMPS] Shorted Pi-Network Turns, Tom Rauch, 13:39
- [AMPS] Alphas, perry, 13:34
- [AMPS] screen grid, measures, 13:24
- [AMPS] Alphas, LEE R. WICAL, 13:09
- [AMPS] Re: Alpha, Lamb, 13:07
- [AMPS] A good suggestion!, Tom Rauch, 12:51
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 12:51
- [AMPS] Shorted Pi-Network Turns, measures, 12:36
- [AMPS] Re: Alpha, HAMKE4WY@aol.com, 11:43
- [AMPS] Alpha, HAMKE4WY@aol.com, 11:29
- [AMPS] Shorted Pi-Network Turns, Lamb, 11:28
- [AMPS] Parasitics DebateArchive, measures, 10:37
- [AMPS] Blown TL922A... What to do?, YZ6X Sasha Kraljevich, 06:42
- [AMPS] Blown TL922A... What to do?, measures, 06:05
- [AMPS] Blown TL922A... What to do?, measures, 06:05
- [AMPS] Blown TL922A... What to do?, measures, 06:05
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 02:27
- Fw: [AMPS] Amp Explosions, jeff millar, 00:41
- [AMPS] Blown TL922A... What to do?, Jim Reid, 00:09
- [AMPS] Amp Explosions, Spencer Petri, 00:02
September 09, 2000
- [AMPS] Properties of Different Metals, jeff millar, 23:35
- [AMPS] Blown TL922A... What to do?, measures, 23:20
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 22:26
- [AMPS] Blown TL922A... What to do?, measures, 21:10
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 19:57
- [AMPS] QRO RF remote switches, Chuck Counselman, 19:35
- [AMPS] Still have a few 15kV modules left. K0FF, K0FF, 18:03
- [AMPS] Sked please - Rich and Tom, measures, 17:55
- [AMPS] Dud 3cx800A7s wanted., measures, 15:30
- [AMPS] Sked please - Rich and Tom, Phil Levin W2GE, 15:18
- [AMPS] Alpha Power Closing, Walter Dail, 15:01
- [AMPS] Re: Sked with Rich and Tom, Chris Tran GM3WOJ, 14:46
- [AMPS] Closing of Alpha Power, michael watts, 14:18
- [AMPS] SELL:8877 RF Deck Components, Phil Clements, 13:43
- [AMPS] Alpha Going T/U, Paul Christensen, 13:11
- [AMPS] 4CX10,000 setup. K0FF, Kenneth C. Falk, CCIM, 12:02
- [AMPS] Alpha Going T/U, Phil Clements, 11:44
- [AMPS] Amp Explosions, Phil Clements, 11:26
- [AMPS] 4CX10,000 setup. K0FF, measures, 11:11
- [AMPS] RF Ammeter, measures, 11:07
- [AMPS] suppressor experience, Maurizio Panicara, 11:06
- [AMPS] 4CX10,000 setup. K0FF, K0FF, 10:52
- [AMPS] screen grid, measures, 10:31
- [AMPS] Properties of Different Metals, K0FF, 10:21
- [AMPS] suppressor experience, Uwe Egen, 10:19
- [AMPS] 8877 Rejuvination, measures, 10:02
- [AMPS] RF Ammeter, Mike Sawyer, 09:14
- [AMPS] screen grid, Alfredo Rosati I5UXJ, 08:58
- [AMPS] 8877 Rejuvination, measures, 08:52
- [AMPS] Ooooops!, John K4WJ, 08:25
- [AMPS] Alpha Power Closing?, John K4WJ, 08:18
- [AMPS] 8877 Rejuvination, Tom Rauch, 07:48
- Fw: [AMPS] Amp Explosions, Mark Trotman, 03:43
- [AMPS] 8877 Rejuvination, measures, 01:59
- [AMPS] 8877 Rejuvination, Tom Rauch, 01:29
- [AMPS] 8877 Rejuvination, measures, 01:22
- [AMPS] screen grid, measures, 01:22
September 08, 2000
- [AMPS] Properties of Different Metals, Jim Smith, 23:24
- [AMPS] screen grid, Alfredo Rosati I5UXJ, 22:56
- [AMPS] 8877 Rejuvination, Tom Rauch, 22:43
- [AMPS] 572s and Yeasu FL 2100, Bert Lujan, 22:31
- [AMPS] 572s and Yeasu FL 2100, Tom Rauch, 22:24
- [AMPS] 8877 Rejuvination, dan hearn, 22:24
- [AMPS] Logic v. Magic, Tom Rauch, 21:50
- [AMPS] SELL:8877 RF Deck Components, Wt8r@aol.com, 21:41
- [AMPS] Logic v. Magic, measures, 21:33
- [AMPS] Logic v. Magic, Tom Rauch, 20:28
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 20:24
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 20:24
- [AMPS] Alpha Power shuts down, <kq0b@sprintmail.com (Michael W. Elliott), 19:44
- [AMPS] Alpha Power shuts down, Terry Gaiser, 19:36
- [AMPS] Blown TL922A... What to do?, Jim Stutzman, 19:15
- [AMPS] Howitzer?, Mike Blier, 19:13
- [AMPS] Alpha Power shuts down, <kq0b@sprintmail.com (Michael W. Elliott), 18:35
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 18:15
- [AMPS] Alpha Power shuts down, Jim, 18:11
- [AMPS] Logic v. Magic, measures, 18:03
- [AMPS] Blown TL922A... What to do?, measures, 18:02
- [AMPS] Sked please - Rich and Tom, measures, 18:02
- [AMPS] Sked please - Rich and Tom, Phil Levin W2GE, 17:37
- [AMPS] Logic v. Magic, Tom Rauch, 17:12
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 17:12
- [AMPS] Input to the final/, K0FF, 16:56
- [AMPS] Howitzer?, K0FF, 16:49
- [AMPS] Extreme radio, Steve Thompson, 16:44
- [AMPS] Logic v. Magic, measures, 16:37
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 16:28
- [AMPS] Logic v. Magic, Tom Rauch, 16:28
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 16:28
- [AMPS] SELL:8877 RF Deck Components, Tom Rauch, 16:28
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 16:17
- [AMPS] Blown TL922A... What to do?, measures, 16:01
- [AMPS] Blown TL922A... What to do?, measures, 16:01
- [AMPS] Blown TL922A... What to do?, measures, 16:01
- [AMPS] Logic v. Magic, measures, 16:01
- [AMPS] Blown TL922A... What to do?, measures, 16:01
- [AMPS] Logic v. Magic, Paul Christensen, 15:32
- [AMPS] Sked please - Rich and Tom, Chris Tran GM3WOJ, 15:19
- [AMPS] Logic v. Magic, Colin Lamb, 13:35
- [AMPS] Logic v. Magic, Peter Chadwick, 13:01
- [AMPS] Anyone ready to go back to talking about CBers?, measures, 12:59
- [AMPS] Blown TL922A... What to do?, measures, 12:44
- [AMPS] Blown TL922A... What to do?, measures, 12:43
- [AMPS] Blown TL922A... What to do?, measures, 12:43
- [AMPS] Logic v. Magic, Colin Lamb, 12:39
- [AMPS] SELL:8877 RF Deck Components, Lane Zeitler, 12:37
- [AMPS] Anyone ready to go back to talking about CBers?, Peter Chadwick, 12:29
- [AMPS] Anyone ready to go back to talking about CBers?, Jeff Wolf, 12:20
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 11:40
- [AMPS] SELL:8877 RF Deck Components, w2cqm@juno.com, 11:40
- [AMPS] Blown TL922A... What to do?, Mark S Graalman, 11:12
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 11:08
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 10:46
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 10:43
- [AMPS] Blown TL922A... What to do?, measures, 10:42
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 10:23
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 10:23
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 10:23
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 10:05
- [AMPS] Blown TL922A... What to do?, measures, 09:47
- [AMPS] Blown TL922A... What to do?, measures, 09:31
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 08:52
- [AMPS] Blown TL922A... What to do?, measures, 08:47
- [AMPS] TL-922, measures, 08:47
- [AMPS] Blown TL922A... What to do?, measures, 08:47
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 08:33
- [AMPS] Blown TL922A... What to do?, Pete Smith, 06:53
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 03:27
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 03:25
- [AMPS] TL-922, dcckc, 02:53
- [AMPS] TL-922, Steve Thompson, 02:39
- [AMPS] TL-922, Jim Reid, 02:21
- [AMPS] still no amplifier talk, measures, 01:57
- [AMPS] Blown TL922A... What to do?, Steve, 01:34
- [AMPS] TL-922, Tom Rauch, 01:31
- [AMPS] Blown TL922A... What to do?, Bob & Linda McGraw K4TAX, 01:09
- [AMPS] TL-922, Jim Reid, 00:06
September 07, 2000
- [AMPS] TL-922, Don Kessler, 23:57
- [AMPS] still no amplifier talk, Tom Rauch, 23:32
- [AMPS] TL-922, measures, 23:28
- [AMPS] TL-922, science, and degrees., measures, 23:28
- [AMPS] TL-922, RMead100@aol.com, 23:12
- [AMPS] TL-922, Tom Rauch, 23:02
- [AMPS] TL-922, measures, 22:45
- [AMPS] Blown TL922A... What to do?, George K. Watson, 22:35
- [AMPS] TL-922, Wt8r@aol.com, 22:33
- [AMPS] Blown TL922A... What to do?, measures, 22:26
- [AMPS] TL-922, science, and degrees., measures, 22:25
- [AMPS] TL-922, science, and degrees., Tom Rauch, 22:25
- [AMPS] TL-922, measures, 22:25
- [AMPS] TL-922, Tom Rauch, 22:20
- [AMPS] Blown TL922A... What to do?, measures, 21:55
- [AMPS] Blown TL922A... What to do?, measures, 21:55
- [AMPS] TL-922, science, and degrees., measures, 21:55
- [AMPS] Blown TL922A... What to do?, measures, 21:55
- [AMPS] TL-922, science, and degrees., Don Kessler, 21:30
- [AMPS] TL-922, Don Kessler, 21:08
- [AMPS] Blown TL922A... What to do?, Phil (VA3UX), 20:43
- [AMPS] Blown TL922A... What to do?, measures, 20:39
- [AMPS] Blown TL922A... What to do?, measures, 20:39
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 19:21
- [AMPS] Blown TL922A... What to do?, Mike Sawyer, 18:11
- [AMPS] Blown TL922A... What to do?, Phil Levin W2GE, 17:38
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 17:07
- [AMPS] Blown TL922A... What to do?, Mike Sawyer, 16:58
- [AMPS] 4CX1000A grid current, Steve Thompson, 16:31
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 16:27
- [AMPS] TL-922, science, and degrees., Tom Rauch, 16:16
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 16:01
- [AMPS] Blown TL922A... What to do?, N6BUU@aol.com, 15:55
- [AMPS] Blown TL922A... What to do?, measures, 15:39
- [AMPS] Blown TL922A... What to do?, measures, 15:39
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 14:07
- [AMPS] Blown TL922A... What to do?, dcckc, 13:55
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 13:45
- [AMPS] Blown TL922A... What to do?, dcckc, 13:35
- [AMPS] Blown TL922A... What to do?, measures, 13:19
- [AMPS] keep it simple, with good parts, measures, 12:45
- [AMPS] Storing tubes, Kevin Polchan, 12:41
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 12:36
- [AMPS] TL-922, measures, 12:32
- [AMPS] Blown TL922A... What to do?, measures, 12:32
- [AMPS] Blown TL922A... What to do?, measures, 12:32
- [AMPS] 4CX1000A grid current, Chris Tran GM3WOJ, 12:10
- [AMPS] keep it simple, with good parts, John T. M. Lyles, 12:02
- [AMPS] Blown TL922A... What to do?, measures, 11:39
- [AMPS] Blown TL922A... What to do?, measures, 11:39
- [AMPS] heating tubes...., measures, 11:39
- [AMPS] CBers covering up weak signal DX, michael watts, 11:32
- SV: [AMPS] heating tubes...., sm5ki, 10:15
- [AMPS] Storing tubes, Colin Lamb, 09:45
- [AMPS] Storing tubes, Tom Rauch, 09:45
- [AMPS] TL-922, Tom Rauch, 09:42
- [AMPS] TL-922, Paul Christensen, 09:31
- [AMPS] TL-922, Tom Rauch, 09:21
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 09:16
- [AMPS] TL-922A Again..., Tom Rauch, 09:11
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 09:11
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 09:11
- [AMPS] Chasing undesired oscillation, query..., Tom Rauch, 09:11
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 09:11
- [AMPS] Blown TL922A... What to do?, Phil (VA3UX), 09:06
- [AMPS] HV Switch, Wt8r@aol.com, 07:37
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 05:40
- [AMPS] TL-922A Again..., dcckc, 05:16
- [AMPS] heating tubes...., Peter Chadwick, 05:11
- [AMPS] heating tubes...., <g3sek@ifwtech.com (Ian White, G3SEK), 05:05
- [AMPS] Blown TL922A... What to do?, dcckc, 05:00
- [AMPS] Blown TL922A... What to do?, Peter Chadwick, 05:00
- [AMPS] Big muthah soldering iron, Peter Chadwick, 04:57
- [AMPS] TL-922A Again..., Peter Chadwick, 04:54
- [AMPS] HV Switch, Tarrant David, 04:42
- [AMPS] Blown TL922A... What to do?, measures, 04:23
- [AMPS] NCL-2000 question, measures, 04:23
- [AMPS] Blown TL922A... What to do?, measures, 04:23
- [AMPS] Blown TL922A... What to do?, measures, 04:23
- [AMPS] NCL-2000 question, Jim Stutzman, 03:51
- [AMPS] Blown TL922A... What to do?, Peter Sundberg, 03:39
- [AMPS] Blown TL922A... What to do?, Steve Thompson, 03:20
- [AMPS] NCL-2000 question, Steve Smith, 01:12
- [AMPS] Blown TL922A... What to do?, michael watts, 00:57
September 06, 2000
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 23:29
- [AMPS] Temperature Sensors, w6frmarv, 22:58
- [AMPS] BS detection, measures, 22:51
- [AMPS] Blown TL922A... What to do?, measures, 22:51
- [AMPS] Blown TL922A... What to do?, Don Kessler, 22:32
- [AMPS] Blown TL922A... What to do?, measures, 22:16
- [AMPS] Blown TL922A... What to do?, measures, 22:16
- [AMPS] Blown TL922A... What to do?, measures, 22:16
- [AMPS] Relays instead of a bandswitch, Norman Hockler, 21:52
- [AMPS] BS detection, Bill Aycock, 21:02
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 20:14
- [AMPS] Relays instead of a bandswitch, michael watts, 20:12
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 20:10
- [AMPS] Blown TL922A... What to do?, michael watts, 19:51
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 19:26
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 19:26
- [AMPS] heating tubes...., Tom Rauch, 19:26
- [AMPS] Blown TL922A... What to do?, michael watts, 19:15
- [AMPS] Blown TL922A... What to do?, measures, 19:11
- [AMPS] NEED DUNESTAR MODEL 600 INFO PSE, GUY, 18:53
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 18:09
- [AMPS] heating tubes...., measures, 16:47
- [AMPS] Blown TL922A... What to do?, Paul Christensen, 16:45
- [AMPS] Blown TL922A... What to do?, measures, 16:33
- [AMPS] Blown TL922A... What to do?, measures, 16:12
- [AMPS] Chasing undesired oscillation, query..., Bob Duckworth, 15:13
- [AMPS] heating tubes...., <g3sek@ifwtech.com (Ian White, G3SEK), 15:06
- [AMPS] Blown TL922A... What to do?, Bill Aycock, 14:42
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 13:43
- [AMPS] heating tubes...., measures, 13:13
- [AMPS] Blown TL922A... What to do?, measures, 12:34
- [AMPS] heating tubes...., Tom Rauch, 12:05
- [AMPS] Big muthah soldering iron, <g3sek@ifwtech.com (Ian White, G3SEK), 12:04
- [AMPS] heating tubes...., John T. M. Lyles, 11:28
- [AMPS] Reduced Price on 30S-1, Jeff Weinberg W8CQ, 09:28
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 07:49
- [AMPS] Blown TL922A... What to do?, Jaime P.Ullívarri, 03:52
- [AMPS] 30-S1 Question, Lamb, 03:46
- [AMPS] Big muthah soldering iron, dcckc, 03:37
- Fwd: Re: [AMPS] Blown TL922A... What to do?, dcckc, 03:34
- [AMPS] Big muthah soldering iron, Steve Thompson, 03:03
- Cooking tubes: was Re: [AMPS] Blown TL922A... What to do?, Bob Duckworth, 02:04
- [AMPS] Blown TL922A... What to do?, measures, 01:08
- [AMPS] Big muthah soldering iron, George K. Watson, 00:57
- [AMPS] Big muthah soldering iron, Phil Clements, 00:39
September 05, 2000
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 23:36
- [AMPS] Big muthah soldering iron, George K. Watson, 23:20
- [AMPS] Blown TL922A... What to do?, measures, 23:08
- [AMPS] 922 Power supply, measures, 23:08
- [AMPS] TL-922A Again..., measures, 23:07
- [AMPS] Big muthah soldering iron, Paul Kiesel, 22:44
- [AMPS] Super Glue, Phil Clements, 22:33
- [AMPS] Super Glue, Leigh, 22:29
- [AMPS] TL-922A Again..., Gary McAdams, 20:49
- [AMPS] TL-922A Again..., Tom Rauch, 20:11
- [AMPS] 922 Power supply, Tom Rauch, 20:07
- [AMPS] Blown TL922A... What to do?, N6BUU@aol.com, 19:33
- [AMPS] TL-922A Again..., Gary McAdams, 19:32
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 19:15
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 19:06
- [AMPS] Blown TL922A... What to do?, measures, 17:12
- [AMPS] Blown TL922A... What to do?, measures, 17:12
- [AMPS] Blown TL922A... What to do?, <g3sek@ifwtech.com (Ian White, G3SEK), 17:08
- [AMPS] source of remote drive motors, <g3sek@ifwtech.com (Ian White, G3SEK), 17:02
- [AMPS] Blown TL922A... What to do?, N6BUU@aol.com, 16:34
- [AMPS] GS-23B/4CX1600U FOR SALE, UT7CT---> Anton Koval, 16:04
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 15:23
- [AMPS] Blown TL922A... What to do?, dcckc, 14:46
- [AMPS] source of all sources, measures, 13:07
- [AMPS] 30S-1 power output, Larry L. Ravlin, 12:25
- [AMPS] 30S-1 power output, Larry L. Ravlin, 12:22
- [AMPS] source of all sources, John T. M. Lyles, 12:00
- [AMPS] latching relay, rb, 11:53
- [AMPS] arcing vacuum tubes, John T. M. Lyles, 11:44
- [AMPS] latching relay, Hank Phillips, 11:25
- [AMPS] Blown TL922A... What to do?, Tom Rauch, 11:19
- [AMPS] Re: latching relay, Roy Koeppe, 11:17
- [AMPS] latching relay, Phil (VA3UX), 11:15
- [AMPS] 30S-1 power output - correction, Chris Tran GM3WOJ, 10:44
- [AMPS] 30S-1 power output, Chris Tran GM3WOJ, 10:32
- [AMPS] latching relay, rb, 10:31
- [AMPS] sb-1000 fan noise, Steve Smith, 10:11
- [AMPS], Jeff Wolf, 09:14
- [AMPS] 30-S1 Question, Leigh, 09:03
- [AMPS] 30-S1 Question, measures, 04:19
- [AMPS] 30-S1 Question, Jan.E.Holm@telia.se, 03:25
- [AMPS] Blown TL922A... What to do?, measures, 03:15
- [AMPS], measures, 03:15
- [AMPS] Blown TL922A... What to do?, measures, 03:14
- [AMPS] ????, michael watts, 01:07
September 04, 2000
- [AMPS] Blown TL922A... What to do?, Gary McAdams, 23:18
- [AMPS], Jeff Wolf, 22:59
- [AMPS] 6146B, N6BUU@aol.com, 22:35
- [AMPS] Blown TL922A... What to do?, Gary McAdams, 21:18
- [AMPS] Clipperton-L problems -- need help, KB7WW Art Moe, 21:07
- [AMPS] ????, measures, 20:35
- [AMPS] HF 1250, Steve, 19:45
- [AMPS] ????, HAMKE4WY@aol.com, 18:06
- [AMPS] 6146B, Hans Otto Pyndt, 16:35
- [AMPS] Clipperton-L parts wanted, Winston F. Jones, 15:01
- [AMPS], measures, 14:29
- [AMPS] Set of Ten Electrolytic Caps, Jeff Weinberg W8CQ, 14:15
- [AMPS] Clipperton-L problems -- need help, Phil Clements, 14:12
- [AMPS] Re: [Henry], Phil Clements, 12:47
- [AMPS] ignore this please, Martin John Hallsworth, 12:00
- [AMPS], Hank Phillips, 11:03
- [AMPS] source of remote drive motors, Peter Chadwick, 10:58
- [AMPS] Clipperton-L problems -- need help, Winston F. Jones, 10:27
- [AMPS] Clipperton-L problems -- need help, Winston F. Jones, 09:41
- [AMPS] AWG to SWG, Conrad Farlow, 03:44
September 02, 2000
- [AMPS] Problem with SB-220 Bias Diodes, measures, 21:42
- [AMPS] Problem with SB-220 Bias Diodes, Mike Sawyer, 20:21
- [AMPS] Problem with SB-220 Bias Diodes, Phil (VA3UX), 19:19
- [AMPS] FS - Vacuum Caps, Nancy & Steve Lawrence, 18:42
- [AMPS] Problem with SB-220 Bias Diodes, measures, 18:16
- [AMPS] S21 measurements Web Page anyone?, Tom Rauch, 15:23
- [AMPS] Problem with SB-220 Bias Diodes, Phil (VA3UX), 14:48
- [AMPS] Verner Topsøe-Jensen <, Tom Rauch, 13:56
- [AMPS] S21 measurements Web Page anyone?, Tom Rauch, 13:48
- [AMPS] Problem with SB-220 Bias Diodes, measures, 12:57
- [AMPS] Problem with SB-220 Bias Diodes, Tom Rauch, 12:23
- [AMPS] Problem with SB-220 Bias Diodes, Joe Subich, W8IK, 09:05
- [AMPS] Problem with SB-220 Bias Diodes, measures, 08:37
- [AMPS] Problem with SB-220 Bias Diodes, John den Boer, 07:55
- [AMPS] Problem with SB-220 Bias Diodes, measures, 07:35
- [AMPS] Problem with SB-220 Bias Diodes, Tom Rauch, 05:44
- [AMPS] Who's who, <g3sek@ifwtech.com (Ian White, G3SEK), 03:59
- [AMPS] SB1000 HELP!, measures, 00:51
- [AMPS] Problem with SB-220 Bias Diodes, measures, 00:30
September 01, 2000
- [AMPS] Testing HV Psu, RCM, 23:25
- [AMPS] Problem with SB-220 Bias Diodes, Tom Rauch, 22:47
- [AMPS] AL-1200, Mike Sawyer, 20:28
- [AMPS] Re: Continuos Duty Amp, Phil Clements, 19:10
- [AMPS] Re: Continuos Duty Amp, measures, 18:19
- [AMPS] SB1000 HELP!, measures, 17:47
- [AMPS] Problem with SB-220 Bias Diodes, measures, 17:15
- [AMPS] Re: Continuos Duty Amp, measures, 17:15
- [AMPS] AL-1200, measures, 17:15
- [AMPS] Re: Continuos Duty Amp, Steve Hajducek, 17:01
- [AMPS] Who's who, A P, 15:40
- [AMPS] SB1000 HELP!, Tom Rauch, 14:58
- [AMPS] AL-1200, measures, 14:40
- [AMPS] SB1000 HELP!, measures, 14:40
- [AMPS] Who's who, measures, 13:40
- [AMPS] SB1000 HELP!, Vic Rosenthal, 13:37
- [AMPS] AL-1200, Phil Clements, 13:35
- [AMPS] Problem with SB-220 Bias Diodes, Tom Rauch, 13:31
- [AMPS] AL-1200, Paul Christensen, 13:27
- [AMPS] Who's who, michael watts, 13:17
- [AMPS] AL-1200, measures, 12:54
- [AMPS] AL-1200, measures, 12:54
- [AMPS] CBers The last Word?, measures, 12:54
- [AMPS] HF-2500 - Super Amp., measures, 12:54
- [AMPS] Re: Continuos Duty Amp, Steve Hajducek, 12:22
- [AMPS] HF-2500 - Super Amp., measures, 11:52
- [AMPS] CBers The last Word?, measures, 11:52
- [AMPS] SB1000 HELP!, measures, 11:52
- [AMPS] Problem with SB-220 Bias Diodes, measures, 11:52
- [AMPS] SB1000 HELP!, measures, 11:52
- [AMPS] HF-2500 - Super Amp., Phil Clements, 11:37
- [AMPS] CBers The last Word?, i4jmy@iol.it, 11:23
- [AMPS] Opinions, w2fca@qsl.net, 11:02
- [AMPS] HF-2500 - Super Amp., Tom Rauch, 10:59
- [AMPS] AL-1200, Paul Christensen, 10:41
- [AMPS] CBers The last Word?, dcckc, 10:36
- [AMPS] Opinions, Pete Smith, 10:33
- [AMPS] AL-1200, Phil Clements, 10:31
- [AMPS] SB1000 HELP!, Phil Clements, 10:27
- [AMPS] Opinions, HAMKE4WY@aol.com, 10:16
- [AMPS] FS: Copper Sheeting, jhill@visi.com, 08:29
- [AMPS] HF-2500 - Super Amp., Kenneth C. Falk, CCIM, 06:56
- [AMPS] Problem with SB-220 Bias Diodes, Tom Rauch, 05:44
- [AMPS] SB1000 HELP!, Tom Rauch, 05:44
- [AMPS] Testing HV Psu, Steve Eldridge, 04:27
- [AMPS] Slightly off topic., Martin John Hallsworth, 04:07
- [AMPS] SK1A/4CX800A Sockets FS, Tom Hix W4TH, 02:33
- [AMPS] SB1000 HELP!, A.AIMETTE, 00:47