TenTec Mailing List (date)

TenTec Mailing List (date)

[Thread Index] [Top] [All Lists]

September 30, 2016

Re: [TenTec] Orion 1, Carl Moreschi, 17:26
[TenTec] Orion 1, Michael Marx, 16:57
[TenTec] Titan 425 Plate Current Meter needed, Eduardo Araujo via TenTec, 12:58
Re: [TenTec] Tentec Centurion meter adjustment document?, Floyd Sense, 11:04
Re: [TenTec] Need relay from 80450 swr-tr board in Omni D, spikefish, 06:03

September 29, 2016

Re: [TenTec] Need relay from 80450 swr-tr board in Omni D, Gary J FollettDukes HiFi, 20:14
[TenTec] Need relay from 80450 swr-tr board in Omni D, spikefish, 18:08

September 28, 2016

Re: [TenTec] Century 21 parts cadaver, spikefish, 18:25
[TenTec] TenTec Corsair, VFO, Filter, Pegasus, and more FS, Ken, W8EK, 18:10
Re: [TenTec] Tentec Centurion meter adjustment document?, A R, 13:03
[TenTec] Tentec Centurion meter adjustment document?, Floyd Sense, 11:21
Re: [TenTec] Corsair/ Corsair II, Barry N1EU, 05:27
[TenTec] Corsair/ Corsair II, Spencer, 01:28

September 26, 2016

Re: [TenTec] stereo headphones jack of Corsair II, Stuart Rohre, 15:12
Re: [TenTec] stereo headphones with Corsair II, Paul Christensen, 11:52
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Darrell Bellerive, 10:56
Re: [TenTec] stereo headphones with Corsair II, rick@dj0ip.de, 10:29
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Gary J FollettDukes HiFi, 10:08
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Duane Calvin, 09:54
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Gary J FollettDukes HiFi, 09:48
Re: [TenTec] stereo headphones with Corsair II, Louis Ciotti, 08:45
Re: [TenTec] stereo headphones with Corsair II, Barry N1EU, 08:32
Re: [TenTec] stereo headphones with Corsair II, Allan Taylor, 08:22
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Wade Staggs, 05:21
Re: [TenTec] stereo headphones jack of Corsair II, Barry N1EU, 05:18
Re: [TenTec] The New TenTec, Jim Brown, 03:58
Re: [TenTec] The New TenTec, rick@dj0ip.de, 03:41
Re: [TenTec] stereo headphones jack of Corsair II, Spencer, 02:57

September 25, 2016

[TenTec] stereo headphones jack of Corsair II, Allan Taylor, 22:38
[TenTec] Replaced Snaphat battery in O2, Kim Elmore, 20:51
Re: [TenTec] The New TenTec, Michael Poteet, 20:16
Re: [TenTec] About Ten Tech, Steve Berg, 19:40
Re: [TenTec] touch screen monitor software?, Gary J FollettDukes HiFi, 19:26
Re: [TenTec] About Ten Tech, rick@dj0ip.de, 16:04
[TenTec] About Ten Tech, Howellh, 13:35
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Frank Tucker, 12:43
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Ron Notarius W3WN, 11:46
[TenTec] touch screen monitor software?, denton sprague, 11:22
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Art Roberts - W1AER, 09:01
Re: [TenTec] Power output 580 Delta, Bill, 07:59
[TenTec] FOR SALE: Beautiful, highly upgraded Ten-Tec Corsair II (price reduced), Barry N1EU, 06:53
Re: [TenTec] The New TenTec, Jim Brown, 03:13

September 24, 2016

Re: [TenTec] Post to the Amps Reflector from Dishtronix, Wade Staggs, 19:53
Re: [TenTec] The New TenTec, Jim Allen, 18:29
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Clayton Brantley via TenTec, 17:43
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Augie \"Gus\" Hansen, 17:23
Re: [TenTec] Post to the Amps Reflector from Dishtronix, rick@dj0ip.de, 17:21
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Jim Brown, 17:21
Re: [TenTec] The New TenTec, rick@dj0ip.de, 17:14
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Mike Dishop via TenTec, 17:06
Re: [TenTec] The New TenTec, Jim Brown, 16:33
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Louis Ciotti, 16:25
Re: [TenTec] The New TenTec, Paul Christensen, 15:55
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Ronnie Zoerb, 15:38
Re: [TenTec] The New TenTec, Jim Allen, 15:36
Re: [TenTec] The New TenTec, lstoskopf, 14:22
[TenTec] Titan 425 plate current meter needed, Eduardo Araujo via TenTec, 13:51
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Mike Bryce, 12:21
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Jim Brown, 12:13
Re: [TenTec] Post to the Amps Reflector from Dishtronix, rick@dj0ip.de, 09:10
Re: [TenTec] Post to the Amps Reflector from Dishtronix, rick@dj0ip.de, 09:08
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Jim Allen, 09:04
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Wade Staggs, 08:46

September 23, 2016

Re: [TenTec] Paragon is it dead?, Al Gulseth, 21:11
[TenTec] Century 21 parts cadaver, Gary J FollettDukes HiFi, 20:44

September 22, 2016

Re: [TenTec] Paragon is it dead?, Louis Ciotti, 21:54
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Steve Berg, 20:41
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Jim Brown, 20:29
Re: [TenTec] orphans, James Boswell, 15:05
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Joe Papworth via TenTec, 14:36
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Al Gulseth, 14:33
[TenTec] orphans, SPENCER, 14:30
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Joe Papworth via TenTec, 14:20
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Ron Notarius W3WN, 13:53
Re: [TenTec] Post to the Amps Reflector from Dishtronix, steve jobes via TenTec, 13:40
[TenTec] Subject: Argosy 525 Analog, Paul A. Ramey, 13:35
Re: [TenTec] Power output 580 Delta, Lee, 09:44
[TenTec] Looking for Orion 2/ Eagle Optional Filters, Edward A. Feustel, 05:43

September 21, 2016

[TenTec] Power output 580 Delta, Bill, 23:05
Re: [TenTec] Post to the Amps Reflector from Dishtronix, rick@dj0ip.de, 17:17
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Reed Krenn, 14:15
Re: [TenTec] Post to the Amps Reflector from Dishtronix (Jim Brown), Katz Ajamas, 13:39
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Ron Notarius W3WN, 13:34
[TenTec] Argosy 525 Analog, Paul A. Ramey, 13:11
Re: [TenTec] Post to the Amps Reflector from Dishtronix, Ralph Arnold, 12:30
[TenTec] For Sale: LP-PAN and MicroHam MicroKeyer for Orion, OrionII, Barry N1EU, 09:07

September 20, 2016

Re: [TenTec] Need a Jupiter Part, Arthur Lewis, 22:07
Re: [TenTec] Need a Jupiter Part, Gary J FollettDukes HiFi, 21:00
[TenTec] Post to the Amps Reflector from Dishtronix, Jim Brown, 15:49
Re: [TenTec] Need a Jupiter Part, Arthur Lewis, 15:30
[TenTec] Need a Jupiter Part, Mike Bryce, 14:03

September 17, 2016

Re: [TenTec] Preselector for SDR, Jim Brown, 23:51
Re: [TenTec] Paragon tuning knob needed, w8au, 15:52
Re: [TenTec] Preselector for SDR, Spencer, 13:09
Re: [TenTec] Preselectors for SDR, Gary F, 13:07
Re: [TenTec] Paragon tuning knob needed, Gary F, 13:00
Re: [TenTec] Preselector for SDR, Jim Brown, 12:26
Re: [TenTec] Paragon tuning knob needed, Mike Bryce, 12:07
Re: [TenTec] Preselectors for SDR, Chris Howard w0ep, 10:55
Re: [TenTec] Paragon tuning knob needed., Clayton Brantley via TenTec, 09:15
Re: [TenTec] Preselectors for SDR, Jim M. via TenTec, 08:34
Re: [TenTec] Paragon tuning knob needed, Vic Klein, 05:56
Re: [TenTec] Preselector for SDR, rick@dj0ip.de, 04:35
Re: [TenTec] Preselector for SDR, rick@dj0ip.de, 04:32
Re: [TenTec] Paragon tuning knob needed., w8au, 02:34

September 16, 2016

Re: [TenTec] Preselector for SDR, Spencer, 21:54
Re: [TenTec] Preselector for SDR, Paul Christensen, 17:51
Re: [TenTec] Preselector for SDR, Jim Brown, 17:17
[TenTec] V, Robert P. Santella, 15:29
Re: [TenTec] Orion, Fernando, 12:59
Re: [TenTec] Orion, g3ory--- via TenTec, 12:50
Re: [TenTec] Preselector for SDR, Gary J FollettDukes HiFi, 12:45
Re: [TenTec] Orion, Gary J FollettDukes HiFi, 12:42
Re: [TenTec] Orion, g3ory--- via TenTec, 12:39
[TenTec] Preselector for SDR, Rich Jones via TenTec, 12:28
Re: [TenTec] ten tec service, Gary J FollettDukes HiFi, 12:24
[TenTec] ten tec service, donald lucarell via TenTec, 12:10
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, Greg S via TenTec, 11:31
Re: [TenTec] Orion, Gary J FollettDukes HiFi, 09:20
Re: [TenTec] Orion, Barry N1EU, 06:05
Re: [TenTec] Orion, rick@dj0ip.de, 03:03
[TenTec] Orion, Wolf Wita via TenTec, 01:38

September 15, 2016

Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, rick@dj0ip.de, 16:45
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, shristov, 16:41
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, Jim Brown, 16:40
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, rick@dj0ip.de, 16:22
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, Tim, 14:00
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, Jim Brown, 13:08
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, Katz Ajamas, 12:47
Re: [TenTec] Preselector, was: Re: Scads of used Icom IC-7300, Paul Christensen, 11:52
[TenTec] Preselector, was: Re: Scads of used Icom IC-7300, Katz Ajamas, 11:43

September 14, 2016

Re: [TenTec] Paragon is it dead?, Louis Ciotti, 20:32
Re: [TenTec] Paragon is it dead?, Louis Ciotti, 20:30
Re: [TenTec] Active noise cancelling. Was "Re: Scads of used Icom IC-7300", rick@dj0ip.de, 16:34
Re: [TenTec] Active noise cancelling. Was "Re: Scads of used Icom IC-7300", Katz Ajamas, 15:04
[TenTec] Active noise cancelling. Was "Re: Scads of used Icom IC-7300", Katz Ajamas, 14:59
Re: [TenTec] Paragon is it dead?, Mike Bryce, 13:26
Re: [TenTec] Paragon is it dead?, Carl Moreschi, 12:58
Re: [TenTec] Paragon is it dead?, Louis Ciotti, 12:42

September 13, 2016

Re: [TenTec] Scads of used Icom IC-7300, Al Gulseth, 19:14
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 16:31
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 16:21
Re: [TenTec] Scads of used Icom IC-7300, Al Gulseth, 16:09
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 16:02
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 15:42
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 15:35
Re: [TenTec] Scads of used Icom IC-7300, Barry N1EU, 14:49
Re: [TenTec] Paragon is it dead?, Stuart Rohre, 14:42
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 14:34
Re: [TenTec] Scads of used Icom IC-7300, Barry N1EU, 13:54
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 13:52
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 13:49
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 13:47
Re: [TenTec] Scads of used Icom IC-7300, Al Gulseth, 13:14
Re: [TenTec] Scads of used Icom IC-7300, Paul Christensen, 12:23
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 11:41
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 11:29
Re: [TenTec] Scads of used Icom IC-7300, Katz Ajamas, 11:23
Re: [TenTec] Scads of used Icom IC-7300, Gary F, 11:04
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 09:34
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 09:02
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 06:56
Re: [TenTec] Scads of used Icom IC-7300, shristov, 04:19
Re: [TenTec] Scads of used Icom IC-7300, shristov, 04:17

September 12, 2016

Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 23:56
Re: [TenTec] Paragon is it dead?, Louis Ciotti, 19:27
Re: [TenTec] Scads of used Icom IC-7300, SPENCER, 18:14
Re: [TenTec] Scads of used Icom IC-7300, shristov, 17:51
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Spencer, 17:44
[TenTec] 538 jupiter, donald lucarell via TenTec, 17:44
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 17:35
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 16:41
Re: [TenTec] Paragon is it dead?, Stuart Rohre, 16:14
Re: [TenTec] Scads of used Icom IC-7300, Katz Ajamas, 14:30
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Gary J FollettDukes HiFi, 11:02
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Katz Ajamas, 10:55
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Gary J FollettDukes HiFi, 10:36
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Jim Allen, 10:20
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Gary J FollettDukes HiFi, 09:36
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 06:09
Re: [TenTec] Scads of used Icom IC-7300, Barry N1EU, 05:55
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 04:22
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 04:02
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 03:26
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Katz Ajamas, 02:30
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Katz Ajamas, 02:10

September 11, 2016

Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, shristov, 19:22
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 19:02
Re: [TenTec] Scads of used Icom IC-7300, shristov, 18:59
Re: [TenTec] OT: IP3 and Receiver Performance, Gary J FollettDukes HiFi, 18:59
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Gary J FollettDukes HiFi, 18:54
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Carl Moreschi, 18:28
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Gary J FollettDukes HiFi, 18:21
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 18:12
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Paul Christensen, 18:10
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 18:09
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Gary J FollettDukes HiFi, 18:06
Re: [TenTec] Scads of used Icom IC-7300, shristov, 18:06
Re: [TenTec] Transmitter Noise and Radio User Interface, rick@dj0ip.de, 17:52
Re: [TenTec] Scads of used Icom IC-7300, Carl Moreschi, 17:44
Re: [TenTec] Scads of used Icom IC-7300, Carl Moreschi, 17:40
[TenTec] Transmitter Noise and Radio User Interface, terry foskey via TenTec, 17:39
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 17:31
Re: [TenTec] ten tec orion 2 not booting up, Sergio Escudero, 17:30
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 17:22
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, rick@dj0ip.de, 17:06
Re: [TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, Gary J FollettDukes HiFi, 17:02
Re: [TenTec] OT: IP3 and Receiver Performance, rick@dj0ip.de, 17:02
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 16:59
Re: [TenTec] OT: IP3 and Receiver Performance, Gary J FollettDukes HiFi, 16:44
Re: [TenTec] OT: IP3 and Receiver Performance, rick@dj0ip.de, 16:33
Re: [TenTec] TenTec Digest, Vol 165, Issue 20, Edward A Feustel, 15:33
Re: [TenTec] Paragon is it dead?, Lee, 15:12
[TenTec] In Search of New Receiver Performance Paradigms - Re: IP3 vs. DR3 (IMD) confusion, Chris Howard w0ep, 14:36
Re: [TenTec] IP3 vs. DR3 (IMD) confusion, Chris Howard w0ep, 14:19
Re: [TenTec] OT: IP3 and Receiver Performance, Jim Allen, 14:08
Re: [TenTec] IP3 vs. DR3 (IMD) confusion, rick@dj0ip.de, 11:56
[TenTec] ten tec orion screw set, denton sprague, 11:52
Re: [TenTec] OT: IP3 and Receiver Performance, Greg S via TenTec, 11:50
[TenTec] IP3 vs. DR3 (IMD) confusion, Duane - N9DG via TenTec, 11:36
[TenTec] FOR SALE: Beautiful, highly upgraded Ten-Tec Corsair II, Barry N1EU, 11:31
Re: [TenTec] Paragon is it dead?, Louis Ciotti, 10:25
Re: [TenTec] Trying Locate a download manual for the TenTec 1253 regen receiver, Jim Vohland, 09:14
Re: [TenTec] Scads of used Icom IC-7300, shristov, 07:49
[TenTec] Trying Locate a download manual for the TenTec 1253 regen receiver, Mr Bill Mellema via TenTec, 07:12
Re: [TenTec] Scads of used Icom IC-7300, Barry N1EU, 06:24
[TenTec] OT: IP3 and Receiver Performance, rick@dj0ip.de, 05:59
[TenTec] OT: Dynamic range of SDR Radios with 16-bit DAC, rick@dj0ip.de, 05:00
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 04:49
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 00:32
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 00:10

September 10, 2016

Re: [TenTec] Paragon is it dead?, Al Gulseth, 21:10
Re: [TenTec] Scads of used Icom IC-7300, shristov, 20:04
Re: [TenTec] Paragon is it dead?, Louis Ciotti, 19:39
Re: [TenTec] Paragon is it dead?, Mike Bryce, 19:32
Re: [TenTec] Paragon is it dead?, Louis Ciotti, 18:50
Re: [TenTec] Scads of used Icom IC-7300, Carl Moreschi, 18:32
Re: [TenTec] Paragon is it dead?, Carl Moreschi, 18:28
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 17:14
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 16:38
[TenTec] Paragon is it dead?, Louis Ciotti, 16:34
Re: [TenTec] Scads of used Icom IC-7300, Carl Moreschi, 16:28
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 16:23
Re: [TenTec] Scads of used Icom IC-7300, Carl Moreschi, 16:14
[TenTec] snaphat expiration date? battery longevity?, denton sprague, 15:49
Re: [TenTec] Scads of used Icom IC-7300, Jim Brown, 15:23
Re: [TenTec] Scads of used Icom IC-7300, Carl Moreschi, 15:10
Re: [TenTec] Paragon Hedphone Jack, Louis Ciotti, 14:28
Re: [TenTec] Paragon Hedphone Jack, Gary J FollettDukes HiFi, 14:27
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 14:24
Re: [TenTec] Scads of used Icom IC-7300, Barry N1EU, 14:18
[TenTec] Paragon Hedphone Jack, Louis Ciotti, 14:06
Re: [TenTec] Scads of used Icom IC-7300, Greg S via TenTec, 13:03
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 12:15
Re: [TenTec] Scads of used Icom IC-7300, Tim, 10:25
Re: [TenTec] Scads of used Icom IC-7300, Tim, 10:08
Re: [TenTec] Scads of used Icom IC-7300, Joe Papworth via TenTec, 09:26
Re: [TenTec] Scads of used Icom IC-7300, Barry N1EU, 08:15
Re: [TenTec] Scads of used Icom IC-7300, Jim Vohland, 08:02
Re: [TenTec] Scads of used Icom IC-7300, rick@dj0ip.de, 04:01
Re: [TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 00:59

September 09, 2016

Re: [TenTec] Scads of used Icom IC-7300, Bwana Bob, 23:55
[TenTec] Scads of used Icom IC-7300, Gary J FollettDukes HiFi, 23:14
[TenTec] Orion, Orion 2 VFO Encoders, Gary J FollettDukes HiFi, 18:51
Re: [TenTec] User 1, User 2, etc Settings, Kim Elmore, 10:31
Re: [TenTec] User 1, User 2, etc Settings, Carl Moreschi, 07:37
Re: [TenTec] User 1, User 2, etc Settings, Barry N1EU, 07:12

September 08, 2016

[TenTec] User 1, User 2, etc Settings, Kim Elmore, 22:40
Re: [TenTec] ten tec orion 2 not booting up, Fernando, 22:14
Re: [TenTec] ten tec orion 2 not booting up, denton sprague, 21:11
[TenTec] I need the phone number., Paul K., 16:54
[TenTec] Rick's 515, Katz Ajamas, 11:04

September 07, 2016

[TenTec] Another Orion that has partially lost its mind, Gary J FollettDukes HiFi, 21:45
Re: [TenTec] ten tec, Arthur Lewis, 21:35
Re: [TenTec] rick's recalcitrant 515, Joe Papworth via TenTec, 08:23
Re: [TenTec] rick's recalcitrant 515, rick@dj0ip.de, 04:26
Re: [TenTec] rick's recalcitrant 515, rick@dj0ip.de, 04:20

September 06, 2016

Re: [TenTec] Omni D Bandswitch Cleaning, SPENCER, 19:25
Re: [TenTec] Omni D Bandswitch Cleaning, Stuart Rohre, 16:43
Re: [TenTec] rick's recalcitrant 515, Joe Papworth via TenTec, 16:40
Re: [TenTec] rick's recalcitrant 515, Steve Hunt, 16:22
Re: [TenTec] rick's recalcitrant 515, Katz Ajamas, 16:02
Re: [TenTec] rick's recalcitrant 515, Steve Hunt, 15:34
Re: [TenTec] rick's recalcitrant 515, Lee, 14:55
Re: [TenTec] rick's recalcitrant 515, Steve Hunt, 14:10
[TenTec] ten tec, Rodney, 11:43
[TenTec] ten tec, Rodney, 11:36
Re: [TenTec] rick's recalcitrant 515, Joe Papworth via TenTec, 07:21
Re: [TenTec] rick's recalcitrant 515, rick@dj0ip.de, 01:33

September 05, 2016

[TenTec] Omni D Bandswitch Cleaning, k7mks, 17:28
[TenTec] rick's recalcitrant 515, Katz Ajamas, 17:24
[TenTec] Argo 515, John Frazier, 16:45
Re: [TenTec] ARGONAUT 515 problem, Mike Bryce, 14:44
Re: [TenTec] ARGONAUT 515 problem, Tim, 14:22
Re: [TenTec] ARGONAUT 515 problem, Joe Papworth via TenTec, 12:53
Re: [TenTec] ARGONAUT 515 problem, Joe Papworth via TenTec, 12:41
[TenTec] ARGONAUT 515 problem, Carl Winkles, 12:16
Re: [TenTec] ARGONAUT 515 problem, rick@dj0ip.de, 12:10
Re: [TenTec] FOR SALE: Filters for Orion II, Eagle and RX-366, Bud Berthold via TenTec, 12:06
Re: [TenTec] ARGONAUT 515 problem, rick@dj0ip.de, 12:02
Re: [TenTec] ARGONAUT 515 problem, rick@dj0ip.de, 12:01
Re: [TenTec] ARGONAUT 515 problem, Joe Papworth via TenTec, 12:01
Re: [TenTec] ARGONAUT 515 problem, rick@dj0ip.de, 12:01
Re: [TenTec] ARGONAUT 515 problem, Lee, 11:45
Re: [TenTec] ARGONAUT 515 problem, Mike Bryce, 11:16
Re: [TenTec] ARGONAUT 515 problem, Carl Moreschi, 11:07
Re: [TenTec] ARGONAUT 515 problem, Tim, 11:03
Re: [TenTec] ARGONAUT 515 problem, rick@dj0ip.de, 10:58
Re: [TenTec] ARGONAUT 515 problem, Lee, 10:48
Re: [TenTec] TenTec Digest, Vol 165, Issue 8, Michael Chowning, 10:20
Re: [TenTec] FOR SALE: Filters for Orion II, Eagle and RX-366, Barry N1EU, 09:52
Re: [TenTec] Other radios, rick@dj0ip.de, 09:29
[TenTec] Other radios, JIM LIVINGOOD, 09:22
Re: [TenTec] TenTec Digest, Vol 165, Issue 8, Terry Foskey via TenTec, 08:52
Re: [TenTec] ARGONAUT 515 problem, rick@dj0ip.de, 08:14
Re: [TenTec] ARGONAUT 515 problem, Carl Moreschi, 07:52

September 04, 2016

[TenTec] ARGONAUT 515 problem, rick@dj0ip.de, 22:52
Re: [TenTec] FOR SALE: Filters for Orion II, Eagle and RX-366, Barry N1EU, 17:27
[TenTec] I hate to say it but!, JIM LIVINGOOD, 17:02
Re: [TenTec] I hate to say it but, rick@dj0ip.de, 16:17
Re: [TenTec] I hate to say it but..., rick@dj0ip.de, 16:15
[TenTec] I hate to say it but, JIM LIVINGOOD, 16:04
Re: [TenTec] I hate to say it but..., marsh, 15:57
Re: [TenTec] OT: Hatch has the best Chili Peppers, Michael Chowning, 15:53
Re: [TenTec] scads of ic-7300's, SPENCER, 15:17
Re: [TenTec] ten tec orion 2 not booting up, Fernando, 12:22
[TenTec] ten tec orion 2 not booting up, denton sprague, 11:48
Re: [TenTec] scads of ic-7300's, rick@dj0ip.de, 10:34
[TenTec] OT: Icom IC7300 impression, Katz Ajamas, 10:08
Re: [TenTec] scads of ic-7300's, Barry N1EU, 09:55
Re: [TenTec] scads of ic-7300's, Mike Smith VE9AA, 09:23
Re: [TenTec] FOR SALE: Filters for Orion II, Eagle and RX-366, Gert Meinen, 08:46
[TenTec] FOR SALE: Filters for Orion II, Eagle and RX-366, Barry N1EU, 07:24

September 03, 2016

Re: [TenTec] I hate to say it but..., Michael Tortorella, 12:23
Re: [TenTec] I hate to say it but..., Jim Allen, 11:12
Re: [TenTec] I hate to say it but..., Joe Papworth via TenTec, 10:05
[TenTec] Warranty transfers, Tim Cook, 09:59
Re: [TenTec] I hate to say it but..., Jim Allen, 09:27
[TenTec] I hate to say it but, JIM LIVINGOOD, 04:38
Re: [TenTec] I hate to say it but..., rick@dj0ip.de, 03:14

September 02, 2016

Re: [TenTec] I hate to say it but..., Steve Berg, 19:17
Re: [TenTec] I hate to say it but..., Carl Moreschi, 19:13
Re: [TenTec] I hate to say it but..., Steve Berg, 19:06
Re: [TenTec] TenTec Digest, Vol 165, Issue 3, Gary J FollettDukes HiFi, 18:18
Re: [TenTec] scads of ic-1300, Gary J FollettDukes HiFi, 18:08
Re: [TenTec] I hate to say it but..., Jim Brown, 18:05
[TenTec] scads of ic-1300, Katz Ajamas, 17:28
Re: [TenTec] I hate to say it but..., Greg S via TenTec, 16:09
Re: [TenTec] I hate to say it but..., ken . d . brown, 15:56
Re: [TenTec] I hate to say it but..., Jim Brown, 15:53
Re: [TenTec] I hate to say it but..., Greg S via TenTec, 15:48
[TenTec] Argonaut VI drivers needed for Windows 10?, Mr Bill Mellema via TenTec, 15:39
Re: [TenTec] I hate to say it but..., Jim Brown, 14:12
[TenTec] Help support an out-of-work retired dude, Joe Papworth via TenTec, 13:14
Re: [TenTec] TenTec Digest, Vol 165, Issue 3, Ron Notarius W3WN, 13:10
Re: [TenTec] TenTec Digest, Vol 165, Issue 3, Gary J FollettDukes HiFi, 13:02
Re: [TenTec] TenTec Digest, Vol 165, Issue 3, Katz Ajamas, 12:30
Re: [TenTec] Receiver ratings question, IP3 and synthesizer noise, rick@dj0ip.de, 11:08
Re: [TenTec] I hate to say it but..., Barry N1EU, 10:55
Re: [TenTec] I hate to say it but..., Darrell Bellerive, 10:51
Re: [TenTec] I hate to say it but..., Jim Allen, 10:50
Re: [TenTec] I hate to say it but..., Gary J FollettDukes HiFi, 10:41
Re: [TenTec] I hate to say it but..., Joe Papworth via TenTec, 10:14
Re: [TenTec] I hate to say it but..., Gary J FollettDukes HiFi, 09:53
[TenTec] Receiver ratings question, IP3 and synthesizer noise, Gary J FollettDukes HiFi, 09:51
Re: [TenTec] I hate to say it but..., Bill Steffey NY9H, 09:51
Re: [TenTec] I hate to say it but..., Gary J FollettDukes HiFi, 09:39
Re: [TenTec] I hate to say it but..., Al Gulseth, 09:39
Re: [TenTec] I hate to say it but..., Ron Notarius W3WN, 09:35
Re: [TenTec] I hate to say it but..., Greg S via TenTec, 09:22
Re: [TenTec] I hate to say it but..., rick@dj0ip.de, 08:57
Re: [TenTec] I hate to say it but..., marsh, 08:47
Re: [TenTec] I hate to say it but..., rick@dj0ip.de, 08:18
Re: [TenTec] I hate to say it but..., Paul Christensen, 07:33
Re: [TenTec] I hate to say it but..., Barry N1EU, 05:40
[TenTec] OT: Rob Sherwood's full test review of ANAN-200D posted on my web, rick@dj0ip.de, 02:34

September 01, 2016

[TenTec] I hate to say it but..., Gary J FollettDukes HiFi, 22:55