- 1. [AMPS] RE: (score: 1)
- Author: n2tk@idsi.net (Tony Kazmakites)
- Date: Wed, 1 Dec 1999 13:13:30 -0500
- Sounds like RF is getting into the 430. Suggest you check the mike ground and try adding ferrite on mike cord. Are you using anything like a voice keyer between the mike and the rig? Have had some pr
- /archives//html/Amps/1999-12/msg00006.html (9,278 bytes)
- 2. [AMPS] Icom PW1 - looking for info (score: 1)
- Author: n2tk@idsi.net (Tony Kazmakites)
- Date: Tue, 9 Nov 1999 12:23:12 -0500
- Looking for some info on the PW1. I plan on using it with a Kenwood 950SDX. - What kind of power output should I expect with 100 watts drive? - What happens if you increase the drive to 150 watts? -
- /archives//html/Amps/1999-11/msg00233.html (7,297 bytes)
- 3. [AMPS] Ground rods? (score: 1)
- Author: n2tk@idsi.net (Tony Kazmakites)
- Date: Sun, 10 Oct 1999 22:13:32 -0400
- I hooked up a hose to the end of 3/4" Cu tubing and easily pushed it down in the sand when I lived in southern New Jersey. Did this with 3 pieces around the tower. I question how much of a ground I r
- /archives//html/Amps/1999-10/msg00350.html (8,908 bytes)
- 4. [AMPS] TS940S CONNECTION TO HEATHKIT SB200 LINEAR (score: 1)
- Author: n2tk@idsi.net (Tony Kazmakites)
- Date: Wed, 20 Oct 1999 13:46:16 -0400
- For years I have been taking the 12v "transmit out" signal from the back of Kenwood and Icom radios . I have a voltage divider set up with a 10k and 100k resistor to ground. I tap off of the 100k res
- /archives//html/Amps/1999-10/msg00571.html (9,594 bytes)
- 5. [AMPS] Icom PW1 (score: 1)
- Author: n2tk@idsi.net (Tony Kazmakites)
- Date: Sat, 23 Oct 1999 07:37:43 -0400
- Has anyone modified the PW1 so that you do not need to have power on the amp to be in the bypass mode? It seems kind of dumb that Icom designed the amp that power must be on if you want to just use y
- /archives//html/Amps/1999-10/msg00593.html (6,707 bytes)
This search system is powered by
Namazu