Here in Atlanta I've a 2500V 1.7 A CCS We're talking 5 kW brick on the key here. Apply the typical inflation numbers for lower duty cycle applications. Primary is single phase dual 115V 50/60 Hz. I w
Here is the Big, HiFi, Inverter. 120 V 60 Hz 32 A output with < 2% THD. It is a current production model and NOS. I've a second, also NOS, if someone wants 240 V 8 kVA single phase. To run a pair lik
Reason for ebay response is they are getting fed up with misinformation from the radio police. They pulled my Siltronix 1011C listing because some A$$hole told them it was an unlawful CB rig. My resp
So what's the inductance of a silver dollar? The Q? How about a gold sovereign? The little metal band around a pigeons leg? Those stainless staples used to hold ones guts in after abdominal surgery?
Wayne If no 10m position it is likely designed in accordance with FCC mandate and is not capable of operating on 10m without modification. Mandate says something about no more than xdb gain, I think
IMHO that would be a waste of $2000. One could buy all parts, better quality some nice sheet metal tools, have the front panel machined with engraved letters, anodized cabinet and panel, and have mor
Not wishing to solve empirically... I'm trying to calculate blower requirements for a tube and wonder if anyone on the list can and would mind explaining, in general, how to do this. I know: the geom
I'm having trouble with the cooling requirements of this tube. Specs say 350 W requires 40 m**3 per hour. At 1.2 kg.m**3, that's 52 kg/hour air, squeezed through a 200mm**2 heat exchanger 'duct'. If
Isn't this the way it goes... Q=CV as in charge q Coulombs Now for the other Q(uality) Loaded tank Q is around 2 to 3 Unloaded tank Q is around 10 Unplug the antenna, slam the load control to minimum
Please. Actual experience or hard reference only. How about it. I know there are some commercial amp manufacturers reading this list... Application is GI6B GI7B. Seeking info for other external anode
Trying to decide what to keep and what to dispose of before moving. Dug this out and wonder if anyone is using on ham bands and cares to talk about it. Nifty looking rack mount 1 x 4cx300 450-470Mc b
Have an RF110A with Harris single phase 60cy PS. Clean but not tested. Moving to a very small house in Honolulu next fall and am considering TenTec Titan or other 2 x 3cx800 desktop amp. Anyone carin