Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[AMPS\]\s+6146\s+splatter\s+help\?\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[AMPS\]\s+6146\s+splatter\s+help\?\s*$/: 7 ]

Total 7 documents matching your query.

1. [AMPS] 6146 splatter help? (score: 1): Author: ac6tk@cybertime.net (J. Bradshaw); Date: Mon, 1 Jan 2001 09:37:25 -0800; Since this is where the experts are-- Is there any way to improve the splatter on my TS830s (low s/n) with RCA 6146B's? On voice peaks (p's, t's and ch's) there are burps like key click sup and down; /archives//html/Amps/2001-01/msg00014.html (8,999 bytes)
2. [AMPS] 6146 splatter help? (score: 1): Author: 2@vc.net (measures); Date: Mon, 1 Jan 2001 12:00:58 -0800; It is already the cleanest radio ever built. . ALC is never fast enough. An electret mic. makes cleaner audio. less ALC means less feculence. With 5kHz signal spacing, there is nothing better. happy; /archives//html/Amps/2001-01/msg00018.html (9,637 bytes)
3. [AMPS] 6146 splatter help? (score: 1): Author: nm5k@wt.net (Mark Keith); Date: Mon, 01 Jan 2001 14:43:26 -0600; Not sure what you mean..."low s/n" doesn't make sense... If you are splattering with the ts-830, that would usually mean you are underloaded. This is common with the old hybrid kenwoods, as many will; /archives//html/Amps/2001-01/msg00020.html (12,269 bytes)
4. [AMPS] 6146 splatter help? (score: 1): Author: W8JI@contesting.com (Tom Rauch); Date: Mon, 1 Jan 2001 17:39:51 -0500; Load it heavy enough, and make sure the bias is set properly. Watch the audio gain. The ALC is too slow on attack. Over-tuning (load control open a bit further than normal) helps, as does keeping ju; /archives//html/Amps/2001-01/msg00022.html (8,375 bytes)
5. [AMPS] 6146 splatter help? (score: 1): Author: ac6tk@cybertime.net (J. Bradshaw); Date: Mon, 1 Jan 2001 16:57:12 -0800; Low serial number. The radio is loading fine in CW and making plenty of power and I think it's nutralized. I used a rcvr through a pad at the output with the SG shut off, to adjust it. I'd buy that,; /archives//html/Amps/2001-01/msg00027.html (15,372 bytes)
6. [AMPS] 6146 splatter help? (score: 1): Author: ac6tk@cybertime.net (J. Bradshaw); Date: Mon, 1 Jan 2001 23:20:30 -0800; Ok so how about some feedback: I tried the dynamic mic: In the hi-z (50k) position, it was just like the 444. In the lo-z (150) position, it was just barely enough with the mic gain full bore, but th; /archives//html/Amps/2001-01/msg00031.html (13,686 bytes)
7. [AMPS] 6146 splatter help? (score: 1): Author: W8JI@contesting.com (Tom Rauch); Date: Tue, 2 Jan 2001 05:48:29 -0500; What selectivity are you using on the IFR? What sampling or scan rate? Does the IFR have peak storage? If so how many sweeps is it making in a sample and how fast are they? 73, Tom W8JI w8ji@contest; /archives//html/Amps/2001-01/msg00034.html (8,066 bytes)

Current List: 1 - 7
Page: [1]