Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[AMPS\]\s+Filament\s+resistance\s+and\s+power\s+output\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[AMPS\]\s+Filament\s+resistance\s+and\s+power\s+output\s*$/: 3 ]

Total 3 documents matching your query.

1. [AMPS] Filament resistance and power output (score: 1): Author: n4zr@contesting.com (Pete Smith); Date: Wed, 10 Oct 2001 17:15:24 -0400; I resoldered the filament pins on the ailing 3-500Z, and then put it in the opposite socket, thinking that the spring tension might be better there. I also rebent the spring clips on the original soc; /archives//html/Amps/2001-10/msg00271.html (7,837 bytes)
2. [AMPS] Filament resistance and power output (score: 1): Author: Mike" <W4EF@dellroy.com (Mike); Date: Wed, 10 Oct 2001 17:35:44 -0700; Hi Pete, Filament current on the 3-500Z is around 15 amps per tube. Fourty millohms (.04 ohms) of contact resistance, for instance, is enough to drop the filament voltage by 0.6 volts, or 12% of the; /archives//html/Amps/2001-10/msg00277.html (9,418 bytes)
3. [AMPS] Filament resistance and power output (score: 1): Author: 2@vc.net (2); Date: Wed, 10 Oct 2001 20:31:23 -0700; What is the voltage between pin 5 and the socket contact #5? What is the voltage between pin 1 and pin 5? tnx, Mike - R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures. end -- FAQ on WWW: h; /archives//html/Amps/2001-10/msg00279.html (7,760 bytes)

Current List: 1 - 3
Page: [1]