- 1. [Amps] LK-500 ZB problem (score: 1)
- Author: mike stokes <mike9v@gmail.com>
- Date: Wed, 28 May 2014 21:47:01 -0400
- I bought a used Amp supply LK-500ZB. Met the ham on his way to Dayton so I wasn't able to check it out beforehand. So of course it has a problem. This amp has the QSK board with a qsk switch on the b
- /archives//html/Amps/2014-05/msg00135.html (7,068 bytes)
- 2. Re: [Amps] LK-500 ZB problem (score: 1)
- Author: Vic Rosenthal K2VCO <k2vco.vic@gmail.com>
- Date: Wed, 28 May 2014 19:09:44 -0700
- Mike, I can't answer most of your questions, but in general the most likely cause of vacuum relay failure is hot-switching. This could be due to the design of the amplifier, or the transceiver used t
- /archives//html/Amps/2014-05/msg00136.html (8,106 bytes)
- 3. Re: [Amps] LK-500 ZB problem (score: 1)
- Author: MU 4CX250B <4cx250b@miamioh.edu>
- Date: Thu, 29 May 2014 00:33:25 -0400
- Vic is correct that most vacuum relay problems result from hot switching. You can often repair vacuum relays whose contacts have been welded shut by holding a magnet against the body of the relay. Su
- /archives//html/Amps/2014-05/msg00138.html (9,277 bytes)
- 4. Re: [Amps] LK-500 ZB problem (score: 1)
- Author: "Carl" <km1h@jeremy.mv.com>
- Date: Thu, 29 May 2014 10:35:19 -0400
- I bought a used Amp supply LK-500ZB. Met the ham on his way to Dayton so I wasn't able to check it out beforehand. So of course it has a problem. This amp has the QSK board with a qsk switch on the b
- /archives//html/Amps/2014-05/msg00139.html (10,347 bytes)
- 5. Re: [Amps] LK-500 ZB problem (score: 1)
- Author: mike stokes <mike9v@gmail.com>
- Date: Thu, 29 May 2014 11:14:37 -0400
- Thanks to everyone for their thoughts. Carl was right, as usual. Mine has 4 relays, 3 DIP and the vacuum. I mis spoke when I said 3. Mike KK9V -- Mike Stokes KK9V ____________________________________
- /archives//html/Amps/2014-05/msg00141.html (10,832 bytes)
- 6. Re: [Amps] LK-500 ZB problem (score: 1)
- Author: N7KA@comcast.net
- Date: Thu, 29 May 2014 15:48:16 +0000 (UTC)
- My LK-500NTB QSK board has 4ea AZB-1CH-12DE DIP and 1ea RJ1A relays. The LK-Series manual QSK schematic shows 3 DIP and 1 Vacuum. The manual parts lists show AROMAT D2SE relays, 3 ea on QSK bd, 1ea o
- /archives//html/Amps/2014-05/msg00142.html (7,167 bytes)
This search system is powered by
Namazu