The parallels to contesting are pretty striking. I particularly like how they "crowd sourced" the analysis of the videos and split the problem into those who could see the cheating pattern and then t
N1MM+ has an option in the Telnet window, "Randomize incoming spot frequencies". As each spot comes in, we add -60, -30, 0, 30 or 60 hz to the spot frequencies. This option is on by default. The main
Yahoo groups is experiencing problems. At this point, we have not seen any posts for N1MM+ for two days and Yahoo is silent as to the cause and ETR. Some groups have the problem, others don't. If y
Think about this from the sponsor's point of view: 1. They don't want to deal with a station sending a varying exchange. It means they have to handle it in a special manner, i.e. ignoring copying er
SCV is correct. From the Cabrillo 3.0 standard: LOCATION: Used to indicate the location where the station was operating from. ARRL/RAC Sections For USA and Canada stations LOCATION must be the ARR
Today, Icom released updated firmware, version 1.10, for the Icom IC-7610. Unfortunately, this update contains a defect: the packets that convey spectrum data are missing the header required by the C
This actually broke 5 different programs. The statement below should have been signed: - Tom N1MM (N1MM Logger+) - Tom DL2RUM (RumLog) - Tom VA2VSQ (Win4IcomSuite) - Chen W7A
Icom has released V1.11 of the IC7610 firmware which fixes the issue. They did this 10 days after 1.10 was released. This is a remarkably quick turnaround time for a company its size to respond. Tha
http://hamprojects.info/mortty/ Tom - N1MM or Microham? http://www.microham.com/contents/en-us/d22_CK.html The advantage of Winkeyer USB being you can use it for SO2R. https://www.hamcrafters2.com/WK
Yes, but what would they do? I'll answer that in a minute. There has been a bunch of complaining about FT4 and the automation put into selecting which station to work. I'm sure the authors saw the 6
Stated another way, the *horizontal* component of guy tension is equal. If a guy is longer or shorter than the others, the tensions will not be equal. If the horizontal components were not equal, th
The option only applies to CW. The user cannot specify other modes. The option truly is not for the op that sets it at his station. It is set on by default. This is to aid the dx station. It spreads
State QSO parties are increasingly allowing self spotting. When they request that we specifically allow it in N1MM Logger+, we do. This is the current list of those state parties requesting us to al