Geez ...what an option!! Why didn't I think of that!!! Think I'll switch to knitting because I don't like getting spammed with frivolous QSL cards 73, Dennis N6KI On Sat, 17 Jan 2004 02:34:40 -00 "K0
Radio Shack used to sell one with Part # 43-591 It was under $20 and K6LL and educated followers keep a couple around to hand out to neighbors when they come knocking in middle of contest.... Withins
If anyone has a room to share at Holiday INN or John Jay for DX Convention in Visalia, Pepe XE2MX ( Non-smoker) is looking. Please let me know Thanks and 73 Dennis N6KI ______________________________
Wonder if anyone is either giving up a room or has one to share with Pepe XE2MX for Visalia DX Convention at the Holiday Inn only as he will have limited transportation. Pepe is non-smoker 73, Dennis
Can anyone tell me why when I load VE3NA Morse Trainor program both ver 1.3 and 1.4 on 2 different machines running WIN98 ( Pentium I and II ) the audio breaks up ( stutters) when I start program _ I
Has anyone operated from WP2Z in 2002 or 2003? If so, has condition of antennas and equipment on site improved so one doesn't have to haul much gear in? 73, Dennis N6KI ______________________________
Jay, We understand you went through some hard times and we will always be here to support you. 73, Dennis N6KI San Diego Contest Club On Thu, 27 Mar 2003 21:14:13 -0000 "J. Allen" <jallen@internorth.
As I remember from late 50s possibly early 60s, the ditty went No WAs ( Double-U-AAAs), No WBs (No Double-U-Bees), No Lids, No Kids, No Space Cadets, please.... well, that's what I recall hearing him
Sorry about inadvertant post of this message to CT-User ...although I did get 3 responses !!! ....shows how many contestors still running CT !!! Will be in Tucson over the CQWW SSB Contest weekend. W
trying to get Writelog working here. We have 2 /computers/radios networked and are getting duplicate serial numbers when both Ops start typing a callsign at the same time. Is there a fix ...we don't
Why not use a 6 Ft diameter loop with 20 dB Low Noise Preamp All you need is 20 ft of 50 or 75 ohm hardline for the loop or you can use 20 ft of RG-213 or similar in a Diamond shape If you need plans
Red, I bought one last August at a store called Zany Brainy which is a chain that may be elsewhere besides Southern Cal. The only thing that was different from the first one I built as a kid in the 6
Tom, How does this really benefit ham radio? Is this necessarily "good" publicity There is an excellent video out that was produced several years ago by CQ Magazine I believe, hosted by K1AR. Althoug
I think you are mixing up the 374 and 76 with the Alpha 77......... The 374 and 76 run 1500 to 2000 out... 73, Dennis Vernacchia N6KI On Wed, 02 May 2001 03:41:40 -0700 Tom Osborne <w7why@harborside.
Zoli, Only bad thing I recall about the FT-990 is it does not have SSB Audio Monitor to listen and make sure you have a clean signal leaving the shack, also important if you contest with a Digital Vo
I have to be in San Jose for Field Day weekend and will be available for a berth on Saturday night - CW preferably - if anyone needs an able body between 6 to 7 PM Sat and 1 or 2 in the morning Sun W
Inside the 940 you need the IF-10B unit Outside the 940 Kenwoods level converter is called the IF-232C (WAY Overpriced but in a nice box) There is a unit out by PIEXX that goes in the 940 that is bot
Mike stated "A modern approach is PIEXX's - they sell one gizmo for US$ 89 - all of it goes inside the radio. Some have complained that it comes with a ribbon cable to 9-pin D-sub connector that one
I have to be in San Jose for a family reunion on Field day weekend and would like to participate in Field Day Saturday Night. I prefer CW with a group that is within 1 hour drive of San Jose. I shoul
Hi Ed, Our group, San Diego Contest Club, had one of the original MFJ DVKs and we had nothing but grief with it and after a year of trying to get it working right we finally returned it for a refund.