I totally support Rag's position . It is innovative, and the scoreboards add another layer of emotion. 73 Luis XE2B Enviado desde mi Huawei de Telcel -- Mensaje original -- Asunto: [CQ-Contest] cqcon
Ed I agree with your statement; I think it is correct, as long as your competitors are located in the same propagation area/zone. Although, the bands breakdown are irrelevant when your virtual compet
Hola ! Out of 178 QSO's on my log, the average was 57 Amazingly my own age! 73 Luis XE2B ________________________________ De: CQ-Contest <cq-contest-bounces@contesting.com> en nombre de Dave Edmonds
Nice to see that ham radio contesting is mentioned in this vídeo (WRTC) 73 Enviado desde mi Huawei de Telcel https://youtu.be/ysOq6ywTSzU _______________________________________________ CQ-Contest ma
Hola, I'm planning to operate M2 LP, the oncoming contest season. I do have two WX0B passbands filters from my previous SO2R setup. -Only two radios will be used. and - Very simple antennas setup on
Joe The FT1000MP does it. On SO2V I use the main receiver to run(Left channel) and S&P on the subreceiver (right channel) 73 Luis XE2B Enviado desde mi Huawei de Telcel -- Mensaje original -- Asunto:
Hola, In my case the scoreboard has been a great motivator for keeping the "virtual competition" alive ! It has also helped to hook an old ham -friend of mine- into contesting! Very very enjoyable !
Hello I'm in the process of planning my SO2R low power station. Due to budgetary and practical reasons, I'm considering purchasing two rigs: IC-7300 or TS590SG I know that these might start a religio
Tony, Great valuable information! I will build one to test it. Would you mind send a photo and more details of the stub. I shared the previous info to our club, and some members are already intereste
Dear Matija We featured your awesome video on our today's meeting club. It was a trill to watch it , and we cheereed your effort Congratulations for the outstanding Team effort and Superb video 73 Lu
I need to re-solder a #14AWG copper wire that became unsoldered at the top of the tower. I'd rather prefer to solder it using a portable outdoor soldering tool (if tsuch thing exists) in the top of t