Hi, I'd observed during the contest that quite often my running frequency were reported as being ocuppied by me (LT7H) and by DT7H who seems to be a seldom used Italian callsign, but most likely a ma
Actually DT7H is South Korea instead of Italy as I misread, all other facts correct TTBEoMK. 73 de Pedro, LU7HZ Dr. Pedro E. Colla Va.Belgrano-Ciudad de Cordoba Cordoba- Argentina "Un objetivo sin un
Hi Pedro - interesting data. I have a couple of possible explanations and one potential, at least partial solution. Conditions were pretty mixed on Sunday, at least up here. There was some very rapid
If various receivers of the RBN are reading you as DT7H or IT7H, maybe you should be looking at your leading dits in your callsign and not presuming all the receivers of the RB Network are broken. Th
11.8.2015 22:10, Pedro Colla kirjoitti: Hi, I'd observed during the contest that quite often my running frequency were reported as being ocuppied by me (LT7H) and by DT7H who seems to be a seldom use
Hi I had a similar problem long ago regarding the first L being copied as L hundreds of times. Thing is, the amp was old and I needed to increase the PTT delay to solve it. Hope it helps. 73, Martin
Mike, thanks for reminding me of another cause - short first elements in a callsign can certainly fool both humans and RBN nodes. Winkeyers can definitely cause this, by starting CW as soon as the PT
Thank you for all the answers received both on the reflector and privately. @N4ZR: Thank you, good thoughts as usual. I'll check both possibilities at my station that went unnoticed to me during the
TU folks, @LU5DX, thank you Martin, but I wasn't using a PA during the contest. The problem seems to happen either with rig1 and rig2 of the SO2R configuration. @N4ZR, I'm using N1MM+ but not WinKey
Hi Pedro, Oh okay. Anyways, tray to increase the PTT delay in N1MM and see what happens. Vy 73, Martin LU5DX _______________________________________________ CQ-Contest mailing list CQ-Contest@contest