I have searched the archives and haven't turned up anything. I picked up a very nice Alpha 76A amp and need to find an adaptor to convert the phono (rca) exciter input jack to PL-259. Is there such a
This is so easy. You put a PL-259 on a section of RG-8X and use the reducer meant for RG-59 because both RG-8X and RG-59 are the same size (larger than RG-58) or just drill a reducer meant for RG-58
Buy a 25 foot pre-connectorized RG-58 with PL259 on each end. Whack it in the middle with a meat cleaver. Buy two RCA plugs. Solder them onto the whacked ends of the RG-58. 73, de Hans, K0HB -- http:
Radio Shack use to sell them, Hank. Not sure if they still do, however. You can also get them mail order from The RF Connection: http://www.therfc.com/adapt.htm price is $1.50 each (this guy has real
On all my Alphas, I used a BNC Chassis Mount ( Screw with nut type) as the existing hole easily accomodated most BNC chassis mount connectors that are just mounted using a nut. I was able to remove a
Hi Hank, Presumably you want a UHF female to RCA male. See http://www.rpelectronics.com/ part # 191-015-1 . No doubt there are plenty of other places which have them. 73 es HNY de Jim Smith VE7FO Han
Sure, Radio Shack made and sold such a connector. It's a phone on one end and a PL259 on the other if memory serves. I can take a look in the junk box for it if you can't find anything else/ In actua
Hank (and all) Universal Radio sells just about every conceivable RF adaptor combination The one I think you want is the SO-239 to RCA male. Their catalog number for this item is #2118 Going the othe
I used a Radio Shack BNC to RCA adaptor on the amp end and a BNC to UHF on the rig end and just connected them with a RG-58 BNC to BNC Jumper. 73 es GL Bob, K1VU -- The world's top contesters battle