Presuming that his radio functions properly, it should work on the TS-850 setting, or most any of the Kenwoods. Does it work with other software? I have a friend that wants to use his TS-450 with CT.
Some general LPT port stuff from IBM(Lenovo) http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4YQJQJ You will also likely need to use the PS2.exe utility to set the LPT port proper
The thinkpad 600 has a config utility (Thinkpad Configuration) which allows setting this from within windows. It does default to bi-directional, so John is probably on target with his suggestion. -W5
Can you share the answer? Thanks Dave, W9ZRX. I guess I missed it in the CT_additions. 73 Mike, KA6SAR Michael Baker Scouting Supervisor Atlanta Braves Professional Baseball Club 800-688-3094 x61041
Wow. A lot more can be found in that file too! A great place to start with most any question. 73, Bob W5OV PARTNER mode information can be found in this file. It's in the command section near the end
Allan, Are you certain your computer's clock was accurate? I think the QSO should count since you started the qso on time and were just a little slow on pressing enter. Use Alt-F inside CT to edit th
Dennis, Use a shortcut to start up CTWIN. The only place you should make changes is in the shortcut file. Right click on CTWIN.EXE and click Create Shortcut. This will create "Shortcut to ctwin.exe".
One other thing: You also may be able to run full screen by selecting the Options Tab in the shortcut, and selecting Full screen under Display options. This will make it look like the old full screen
I just installed CTWIN on my IBM 600E laptop running XP Pro, and the process I outlined below works perfectly. Even so, doing Alt-Enter does not make the display full screen, instead the 50 line VGA
Bill, A little more detail will be necessary for anyone to help you. If you get one, what error message do you get? If you don't, what happens? What operating system are you running, and on what type
Speaking of DVPs, I have a mint condition Kenwood (Foster 8 pin round mic connector) cable for a DVP for sale. Please email me direct if you're interested. 73, Bob W5OV I have listed 3 DVP's on ebay,
John, Try changing the CMOS settings for the LPT Port. 73, Bob W5OV I'm experiencing difficulty keying a Ten Tec Pegasus transceiver from the LPT port using a Toshiba Satellite lap top with Windows X
You can run CTWIN in a window instead of in full screen mode. Hit Alt-Enter to change to a window. You can also start CTWIN up with -VGA at the end of the shortcut "target" (outside of the quotes) to
The truth is that when you use your computer for other purposes besides contesting, keeping its time on your local time zone is more convenient. I think that if one needs to use a DOS program such as
Hopefully, your new computer's hard drive is much more reliable than those that were available 20+ years ago when the autosave feature was first added to CT. You really should not need to use this co
Here's a note from N5IN back in Y2K: So, it seems that you can wait until CT loads fully, then press an F-Key and it should clear out. 73, Bob W5OV I am running CT10 (CT8 upgrade) and use COM 1 as my
Charlie, This is not a normal CT problem. Something else is going on in your computer. Do you have any non-CT-related TSR's loaded? It is possible that your hard drive may be failing and this "hang"
Al, What does your Cabrillo file show on the line for the CATEGORY: ? Thanks Al Thank you for your participation in the contest and for submitting your log to JuneVHF@arrl.org. While the Contest Robo
It sounds to me that perhaps you submitted the wrong file. What was it named? It should have been KC2TA.LOG. I'm using the most recent version of CT for Windows available on the site. After competing
This is probably due to the settings in your operating systems not showing the .LOG file extension. You can change this so you can see all file extensions. I think it is through "folder options" or s