Bob, In fact it is not vaporware, however it does not appear that it made it onto the production license-it site, so I understand how you thought that. This will be resolved as soon as possible. Anyo
Bob, Very good sorry about the confusion ;-) Terabeam Technical Services http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-5275 I was responding to the content...not the subject: I thin
Dan, In fact the KNUB-3100-01 (TurboCell Simple Bridge, Hermes I) has the driver support for Prism radios currently but it may not in the future, the KN-50 was designed to be radio specific based on
David, Currently the software for the KN-150 only supports Atheros radios. These radios do not communicate with anything other than Atheros radios. Although we are planning to add support for other c
LaRoy, It has been available for some time. See: http://www.karlnet.com/Documents/ReleaseNotes/RSUReleaseNotes.htm For more details. Ed Terabeam Technical Services http://www.karlnet.com/Support/Supp
LaRoy, The KNUB-3100-03 is new to version 1.20, as version 1.00 had both Hermes I and Intersil combined. Terabeam Technical Services http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-52
Dan, Contact your distributor this is an available product. Terabeam Technical Services http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-5275 Where can these builds be purchased? The o
Dan, This can be converted by Terabeam, please contact support off-list. Thanks, Terabeam Technical Services http://www.karlnet.com/Support/SupportKnowledgeBase.htm 614-822-5275 I just went to licens
Dan, This is now available from the license-it web site. Keep in mind if you have a different version -01 or -02 a conversion must need to take place. Contact Terabeam Technical Services for further
Martin, you are correct in your assumtion.The learning table (bridge) module is before MAC Auth (Filtering), the only was to guarantee the proper MAC bridging is to incorporate a hardware device on e
Caleb, This is a manufacturing defect, the unit should be returned, there is no field fix available for this. Please provide the serial number to support off-list. Thanks, Terabeam Technical Services
Caleb, I understand the unit bridges, but it will not have a valid MAC address, there is n way to correct this in the field. Terabeam Technical Services http://www.karlnet.com/Support/SupportKnowledg
I will forward this email to the management staff at Terabeam. I WILL NOT purposely abandon ANY customer and especially not loyal customers. We appreciate your patience and will continue to support o
I have copied a reply sent from D.Harman (Terabeam Sales). Although it is not the entire response, I hope it sheds some light on concerns related to our products!.I will continue to post replies as I
Mark, Use the wireless link test feature if, available on your cpe or look from each base if it is not. The link test is basically a raw 'listen' so the only authentication that should keep the link
Builds for newer KN150 boards (Atheros) are currently being tested for compatibility and function. Currently these builds are being tested for functionality with Orinoco(Hermes Chipset) only. We will
Larry, if this is a Flashrom unit then it is a known issue for interface four (thus the warning). All other wireless interfaces within the flashrom should be fine. If this is not a Flashrom, please l
All, in the last few weeks the Terabeam/YDI/KarlNet Technical Support center has received many calls related to network performance degradation. The majority of these callers have been experiencing v
Version 5.02 is the initial release of the Marquee products. This release includes EX products only. The bin files are ONLY available with system purchases and are designated for KN150A (former KN150
Site is up!.Try logging in with test account -Userid-guest, Password= guest returned, just can't log in. release _______________________________________________ Karlnet mailing list Karlnet@WISPNotes