Ahh.. ok.. I didn't know if the back plate feature was standardized yet. That makes it much more attractive for the under 3 mile scenario. Thanks Andy, You can definitely change the radio in the embe
What is the breakdown of feature differences? (I bet this has been discussed before, but I will ask anyway) The KN-50 is just a simple client. List price for a COMPLETE unit inside a flat panel anten
We have been using the Etherant for the last 2 years. I wanted something better with throttling. I live in Montana so the environment is challenging enough. (with the exception that we don't have as
Are there any boards that exceed Karlnet spec with a small form factor and higher powered processor so that we aren't installing boards that will be antiquated by next year, forcing Karlnet to remove
I was talking about something other than the KN100 or 200 well...you have the KN-100 http://www.cwlab.com/Products/KarlNet/KN-100.htm also...we have it in an attractive looking 19 dBi enclosed antenn
Is that available right now? Wireless Authentication and Registration Protocol Basically, unless you have authorized someone to use your network, we re-direct them to a site of your choice (preferabl
Do we need a new configurator for 4.44? Does WARP work tightly with Radius? Is there any documentation? --Original Message-- From: Dan Metcalf [mailto:dan.metcalf@wbsysnet.com] Sent: Monday, November
I see the same thing happen sometimes with ROR devices. I will save the configuration and the unit will not come back up. Luckily this last time I was able to use the lanminder to power cycle that ou
In some testing that I did I found that setting interface speed on the CPE created a more SDSL type service, and throttling at the TC base created more ADSL type service. Thus has been my policy. Bus
I have seen this problem in only one instance. I installed an EtherantII to the same mast as the TV antenna is attached. The customer reports problems with only one channel, ABC, and gets poor recept
All messages and email addresses come up in a Google search. Just do a search for your name at google and see what comes up. The first 3 links on my name are posts from this mailing list.... And yes.
Hello all, I was wondering if the NAT redirector is a feature that Karlnet plans on keeping in their software. I can access the NAT redirector (I have yet to find out if it works) if I use the 4.0015
Has anyone certified an antenna/radio combination with the KN-50? I have several new questions: 1. Is possible to use KN50 like "true" 802.11b client for standard AP (not AP+)? 2. If yes, is possible
Check the log .. you may find a fatal exception has occurred as a log file entry. Or such has been for quite a number of etherant's with 3com EC's in them. Andy This is probably not the right mailing
We have about 25 lucent EC's on a shelf at the Bozeman office. Sucks that their bandwidth peaks out at 1 mbit outdoors... (typically see more like 500k outdoors) We have replaced many EC's with highe
Demarctech.com enclosure. I am probably asking a question that has already been asked. But does anyone know of a good type of chasis for the KM-100/200? We are having a hard time finding a creative w
hehehe.. Squeaky wheel gets the grease!!! Keep Moaning!!! Ha! That's funny! I too am tired of hearing people moan about SNR values with Senao cards instead of reading through the countless posts that
I am reposting this.. Because the last message I read said that someone was using prism cards in KN-50's !!! 1. not right now 2. no 3. it won't - kn-50 is TurboCell only 4. not right now - but they'r