When you go back to fix them. Install a ground wire (#12 or #10 wire) as well as a 4' - 8' ground rod...or connect directly to the existing utility ground rod so you don't create a ground loop. I gua
http://www.hyperlinktech.com/web/pdf/sr2400_manual.pdf page 6 I'm not sure that the "learned table lockdown" will accomplish what you need. I'm not even close to a knowledgeable source on STP but fro
We have 45 residential clients on one AP-1000 and also disabled polling. I'm wondering what the value of Karlnet is without the polling. Other than the minute obscurity of the communications (just ad
I have had some serious intermittent noise issues for the last month. I think it is a competitor being a dick but...that is just me. -bob -- Original Message -- From: "Brett Hays" <bretth@htonline.ne
What is Receiver Stuck Detection? Is that the RG lockup issue where low signal or low use causes the RG to drop off? Also, I thought I was just crazy when noticing that the second inteface on an AP10
That is exactly what we have been seeing. Thanks for the clarification. WHERE IS THE CHANNEL AUTOFOLLOW feature?? I thought that was "in the next release". visibility in This however DOWN of
"Frequency Guessing" would be a welcomed option. Not sure it would be worth an upgrade but with the interference issues we have encountered lately, it would have saved me from reconfiguring 50+ radio
So what is everyone's confidence level with remotely upgrading an AP-1000 from 4.31 to 4.43? http://www.karlnet.com/Documents/ReleaseNotes/KarlBridgeKernelReleaseNotes.h
no, I was not aware of any scripting abilities short of writing the SNMP attribs of the RG. Do you have a working example? ...Care to share? thanks, bob -- Original Message -- From: "Chris Conn" <cco
he he.... I just upgraded 3 RG-1000's from 4.x to 4.43. I don't think I'll do the AP unless I'm at the tower. -bob local upgrading let alone remote... we're venturing into here? h
Brett, I think you are doing things correctly with the routing. I don't believe the storm settings will help with ICMP or UDP overloading of the network. These virus's have taken down the networks of
We use a mikrotik based router. It has all the tools to do what you are asking for. check it out http://www.mikrotik.com I but watch installed the would down stuff <RMallory@karlnet.com> month red, c
Or...just ask your neighbor take a large stick and beat you silly. Give him your $4K and let the wounds heal. The pain will be over sooner. How are you going to pay for this monthly recurring if you
so this is basically an Ndis client? and we have to change our netID's around to the same as the channel? CW a connecting correct via boards power difference. selection/scanning you
Anybody had any VPN related issues with sr-4100 and 4.43 outgoing NAT? weekend, my SNMP trap logger was filled with Link Up, Link Down, Link UP, Link Down ... messages from the new base station. Thes
I don't know. I first thought it was low signal quality, as Roger Boggs suggested but like I said...I'm starting to seeit on folks with EXTREMELY good links. Just very irritating. I'm also having som