Looking at the stats on a RG-1K configured as a Soho client. My in FCS errors are over 3million. There are other clients around this person (another one of those places where I see multiple soho's wh
Maybe 13 really is the evil number... anything under 13 works though? Have you tried adding a 4.x client as #13? I'm about to add the 12th and 13th customer to an AP-1000....I'll have to watch that.
The SNR at the client is 43 and the SNR at the tower is 33. The guy is only about 1/2 from the tower with a 12dbi panel antenna. On the remote statistics page: Bytes in: 1,987,965,131 Bytes out: 80,6
You can natively open a chm file in win2k. Just double click it. I guess you won't be able to use it though the configurator though... ;( -- Original Message -- From: "Dan Metcalf" <dan.metcalf@wbsys
I'm with ya Norm. The WET11 is just lurking in the back of my mind and killing me. I think Karlnet could really clean-up if they had a better solution of everything in one and at a decent (**hack** a
Well, what I was talking about was a radio in a NEMA box w/ karlnet for around $200. If you could get it down lower...I think you would be the envy of all. But, I'm sure you already know this. -Bob i
I am going to setup a repeater site on a customers roof. I was planning on using an AP-1000 w/ ISP base and using one radio for backhaul, one for the local network and giving the customer access thro
The Bluewire box, that Ray Hatch has been working on, apparently has Karlnets support. Pricing would be key but at $30...we are getting closer to making me want to use Karlnet more instead of less. -
No, I can't say they are having performance issues but the user has not received even close to that many bytes out of the firewall. I'm not super alarmed but just trying to get a hold of what these v
Doug, can you explain your support further? I mean, what is required to support these devices? thanks, bob -- Original Message -- From: "Support" <support@karlnet.com> To: <karlnet@WISPNotes.com> Sen
I have the same problem connecting via a SEC client to an AP-500. I can't ping the AP-500's lan interface from every client behind the routed SEC client. Some can ping it....others can't. If I reboot
There are about 10 clients behind the routed SEC-client. All of them can get to the remote gateway and out to the internet but not all of them can ping or access the AP-500 that the SEC is connected
Are any of the 100mW + cards supported in an RG-1000? I was just wondering if it would be possible to replace the silver card with higher powered card if it was necessary. -Bob