Hi all, I'm new here, but I've been reading the archives and this is obviously a helpful place to discuss all of our karlnet and related issues. I've been a WISP since late 1999 with Breezeaccess II
I just stuck two 100mW Demarctech Prism2.5 radios in my KN-200 base and it cleared up all of my radio-related problems I was having with Hermes I cards at the base side. Also, I have been using the "
I put up about 5 KN-50s with the Hermes I cards that Karlnet provides before I finally figured out they were causing my problems. It doesn't matter if your signal is perfect or not, they still perfor
Hi all, I'm new here, but I've been reading the archives and this is obviously a helpful place to discuss all of our karlnet and related issues. I've been a WISP since late 1999 with Breezeaccess II
(Sorry to reply so late, I'm not good at paying attention to lists) Two out of 30+ of the SMC cheapies so far have failed. One just stopped working properly, no indication of anything. KN-50 still de
I'm using RFLinx L-series outdoor amplifiers at the base. I'm keeping the base station inside the bunker so the cable run is really long, 250 foot of LMR-600 (about 11 or 12db of loss) The considerab
In my experience, 2.4GHz OFDM vs. 2.4GHz DSSS gets a lot more speed with less SNR and even provides a higher possible ceiling for those situations where your signal isn't just on the edge of acceptab
16-bit PCMCIA bus, no. 32-bit "Cardbus" or whatever you want to call it handles it like a champ. I haven't really found a place where it is spelled out very clearly, but I have a "User Guide" for KN-
Yeah that's the bug that's the focus of this thread. Still seeing it in 4.45-00. Have not yet tried 4.45-01 which appears to have been released 5 days ago. -T Chris Conn wrote: Hello, We see the same
I've also been experiencing a strange problem where these same clients with poor signals/retrans (couple of long range links, 6 - 10 miles plus a couple shorter-range clients with not enough height)
I don't know, it's weird, I've sat down in a bench test environment with the brand new new flash base and connected a KN-105 to it with almost perfect stats (way under 5% retrans) and gotten 4 to 4.5
I have a flash rom base with all KN-50/Prism2 clients. If any client with a significant amount of retransmits starts transferring anything, it happens to me pretty regularly. If a few people decide t
All I really want is to not have to manually restart my AP when I have a retransmit-related interface hang on my existing 4.xx series. Of all the new things we can do, look forward to, etc. etc. that