Same here, had a couple this past week after a storm. Seems really strange that the CPE can pass through enough voltage to fry the connected device without incurring damage itself...odd.. router/nic
The senao 2511CDEXT has been pretty reliable for us. We had a lot of problems with the SMC cards, and the SMC200mw cards we had actually were a lot closer to 100mw anyway. ___________________________
I am deploying two Karlnet Flashrom's this week...already had the hardware, though...bad news if this is accurate. _______________________________________________ Karlnet mailing list Karlnet@WISPNot
Can anyone point me to a currently available motherboard/processor combo that they have had good luck with for Flashrom use? I am needing to get a couple additional flashrom units working and the boa
What's the least expensive way to do a short point to point w/ Turbocell? We are deploying some AP's on grain elevators and need to serve the buildings at the grain elevators which are about 75-100 y
I just put a new flashrom unit together and have a strange problem. It's the same MB/Chipset combo we have used successfully in the past. Boots just fine takes firmware fine (tried 4.45 and 4.44) unt
Hmm...standard pc power supply (atx) 300 watts. Just one Orinoco Gold Card.... I know what you mean, it would lead one to think that. Perhaps I will swap out the PS this morning...seems really unlike
This is solved thanks to Reg @ Karlnet. Didn't like the AGP video card in the system, swapped for a PCI and working fine. Thanks, Reggie. _______________________________________________ Karlnet maili
Brad, We are in the same boat. Boun at CWLab is working on sourcing cpes for me right now. I have had good luck with them and wish to continue purchasing gear there. Failing that, I know that Wincomm
Amen, I have been trying to get KN-50's for two weeks now myself, can't find anyone who can even sell them to me. If they are trying to drive away loyal customers they are definitely on the right tra
We had about 12 customer boxes (mixture of KN-50's and RG's) fall offline yesterday morning between 6 and 9 am. Nothing from the ap side had any effect, but in every case, power cycling the cpe's bro
Must be in the air, pun intended. What does 4.46 beta address? PtMP The steady clients. _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnot
What gear are you using for mobile? up its http://lists.wispnotes.com/mailman/listinfo/karlnet http://lists.wispnotes.com/mailman/listinfo/karlnet _______________________________________________ Karl
I am likewise encouraged. To us, the only thing we really need, aside from bug fixes, is an improved routing module. It would be nice to use subnets smaller than a class c on different interfaces on
We have had a couple of situations now where a customer machine will get a Trojan that sends out massive amounts of traffic and bring down every other customer on the same AP. Most recently, it was o
I think you're right...we use radius for authentication, so the only thing I would be putting on the ap would be the one entry to deny the one customer...probably should have been more descriptive..s
We just bought Karlnet CPE's from Winncom.... _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet