well...you have the KN-100 http://www.cwlab.com/Products/KarlNet/KN-100.htm also...we have it in an attractive looking 19 dBi enclosed antenna, w/ a good PoE solution that works the same whether it's
a $250 CPE w/ everything included... integrated 19 dBi antenna offlist for more info -Charles -- Original Message -- From: "Charles Chia Sheng Wu" <cwu@cwlab.net> To: "Karlnet Mailing List" <karlnet
use the KN-100 boards? usually, it's a sign of not enough power at the RG (since the power draw of the prism cards is higher) - how are you powering the RG? Poe? or the wall wart -Charles I'm current
cool well..v4.02 & 4.43 can be upgraded to the latest...v 3.x, you'll probably want to purchase upgrade keys it didn't work right kind of ok you're setup is perfect for the KN-50 (especially our $25
you need to use the latest configurator - download it from KarlNet http://www.karlnet.com/Support/SupportDownloads.htm -Charles I am trying to upgrade a rg1100 with a knscotcn-v4[1].43k.bin to knscot
where is the error coming from? does it come while you load your key? or does it come while you're trying to upload software? 2 different problems, 2 different remedies the first problem requires one
it works fine (old thread) -Charles _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
here are some basics to get you started VENDOR KarlNet 762 ATTRIBUTE KarlNet-TurboCell-Name 151 string KarlNet ATTRIBUTE KarlNet-TurboCell-TxRate 152 integer KarlNet VALUE KarlNet-TurboCell-TxRate Tx
can you open a packet analyzer? probably ARP problems? (remember, especially w/ older firmware versions, there's still leaky NAT floating around) -Charles i have a network with about 150 client nodes
yes...that's why you should use NAT -Charles --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of rgarcia@riograndecom.com Sent: Sunday, Februar
one comes w/ a card one doesn't --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Dan Metcalf Sent: Tuesday, February 10, 2004 4:55 PM To: 'N
3) We had three AP's burn out in a matter of seconds when the military set up a phased array radar near one of our sites. We also had a W-mux Tsunami & other equipment at the same site that wasn't ef
Hi, We have 4 of the Bromax KarlNet "Lite" loads that we are too lazy to look at (supposedly already flashed from KarlNet, but we've had so much trouble with these that we honestly don't want to deal
Ok...now the next items on the spring cleaning list We have Everything sold as is, w/ 30 day Non-DOA guarantee Q20 CPoE-4000-F - RGs w/ SR-4000 license in PoE in outdoor NEMA4 Enclosure w/ N-Female B
What username/pass? Admin/public? Or Karlnet/public? (they've changed to admin/public now) -Charles Here is what I have seen using the KN50s We have 40 of them in service RGs or KN100s work on all AP
It really depends There are some on what you're using Like, if you've got the KN-50, there is one load that works w/ Hermes I & Intersil, and the other the works w/ ONLY Hermes II Btw...for those tha
yes Am I correct in beleiving that the ror-1000 and cor-1100 are AP-1000's with the karlnet firmware blown in? Thanks, Tom Sharples _______________________________________________ Karlnet mailing lis
Buffalo Tech Is there any pci cards available that karlnet will support with TurboCell driver _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.w
you sure? we just got a bunch... Anyone noticed that there are no more option for Sx-4000 licenses on license-it.com?? Am I missing somethings? Why cant you buy Sx-4000 anymore??? greetings, Nenad __
yes...they've been shipping for several months now -Charles Are the KN 200 shipping yet? Regards Mark McKibbin DCS Internet 64 Queen St Warragul Victoria 3820 Australia www.dcsi.net.au mark@team.dcsi